tp-link Festa Switch Regulatory Compliance Instructions

: August 10, 2024
: tp-link

Table of Contents

tp-link Festa Switch Regulatory Compliance
Product Usage Instructions
Regulatory Compliance
Safety Information
Explanation of the symbols on the product label
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

tp-link Festa Switch Regulatory Compliance

Product Specifications

Product Name: Festa Switch
Model Numbers: Festa FS308G, Festa FS308GP, Festa FS310GP
Power Adapter Model Numbers: T120100-2B1 (For FS308G), T535131-2-DT (For FS308GP/FS310GP)
Responsible Party: TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

Regulatory Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

CE Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference. User may be required to take adequate measures.
TP-Link declares compliance with essential requirements and relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863. Original EU declaration of conformity: https://www.tp-link.com/en/ce

UKCA Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference. User may be required to take adequate measures.
TP-Link declares compliance with essential requirements and relevant provisions of Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. Original UK declaration of conformity: https://www.tp-link.com/support/ukca/

Product Usage Instructions

Installation

Connect the power adapter to the switch.
Connect the switch to a power source.
Connect your devices to the switch using Ethernet cables.

Maintenance
To maintain proper operation of the switch:

Keep the switch in a well-ventilated area to prevent overheating.
Avoid exposing the switch to moisture or extreme temperatures.
Clean the switch regularly to prevent dust buildup.

Troubleshooting
If you encounter issues with the switch, refer to the user manual for troubleshooting steps. Contact TP-Link support if problems persist.

Frequently Asked Questions (FAQ)

Q: What should I do if the switch is not powering on?
A: Check the power adapter connection and ensure it is plugged in properly. If the issue persists, try using a different power outlet.
Q: How many devices can be connected to the switch?
A: The switch supports connecting up to 8 devices for FS308G and FS308GP models, and up to 10 devices for FS310GP model.

Regulatory Compliance

Festa Switch
© 2024 TP-Link 1910013609 REV1.0.0

For Class A switch with power adapter:
FCC Compliance Information Statement

Product Name: Switch
Model Number: Festa FS308G/ Festa FS308GP/ Festa FS310GP

Component Name	Model
Power Adapter	T120100-2B1 (For Festa FS308G)

T535131-2-DT (For Festa FS308GP/ Festa FS310GP)

Responsible party:
TP-Link USA Corporation.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Product Name: Power Adapter
Model Number: T535131-2-DT

Responsible party:
TP-Link USA Corporation.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Product Name: Power Adapter
Model Number: T120100-2B1
Responsible party:
TP-Link USA Corporation.
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2024/1/30

CE Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/ce

UKCA Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp- link.com/support/ukca/

Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A)

Safety Information

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Keep the device away from water, fire, humidity or hot environments.
Place the device with its bottom surface downward.

For switch powered by power adapter:

Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.

For switch powered by power cord:

Plug the product into the wall outlets with earthing connection through the power supply cord.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.
The socket-outlet shall be installed near the equipment and shall be easily accessible. For switch powered by USB or standard PoE:
This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

Environment

Operating Temperature	0–40 ℃ (32–104 ℉ )
Storage Temperature	-40–70 ℃ (-40–158 ℉ )
Operating Humidity	10–90% RH non-condensing
Storage Humidity	5–90% RH non-condensing

Wall Mounting Requirements
Festa FS308G/ Festa FS308GP/ Festa FS310GP
To mount the device on a wall, use 2 screws which complies with ANSI B1.1 4#, (5#), 6#, 8# standard and are more than 8.5 mm in length. When the screws are fixed on the wall, the distance between the screw head and the wall should be more than 1.5 mm.

For Class A switch with no power adapter:
FCC Compliance Information Statement

Product Name: Switch
Model Number: Festa FS318GP/ Festa FS328GP/ Festa FS352GP/ Festa FS318G/ Festa FS328G/ Festa FS352G
Responsible party:
TP-Link USA Corporation
10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
T el: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

CE Mark Warning
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp- link.com/en/ce

UKCA Mark Warningz
This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at https://www.tp- link.com/support/ukca/

Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A)

Safety Information

Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Place the device with its bottom surface downward.
Keep the device away from water, fire, humidity or hot environments.
Plug the product into the wall outlets with earthing connection through the power supply cord.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1. (Only for switch powered by USB or standard PoE)
In Denmark: “Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til stikproppens jord.”;
In Finland: “Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan” ;
In Norway: “Apparatet må tilkoples jordet stikkontakt” ;
In Sweden: “Apparaten skall anslutas till jordat uttag” .

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

CAUTION:
Double pole, neutral fusing. Disconnect mains before servicing.

Explanation of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.

Environment

**** Operating Temperature|