LeapFrog 6013 Phonics Fun Animal Bus User’s Guide

: August 9, 2024
: LeapFrog

Table of Contents

LeapFrog 6013 Phonics Fun Animal Bus
INTRODUCTION
GETTING STARTED
PRODUCT FEATURES
ACTIVITIES
CARE & MAINTENANCE
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LeapFrog 6013 Phonics Fun Animal Bus

LeapFrog-6013-Phonics-Fun-Animal-Bus-product

INTRODUCTION

Thank you for purchasing the Phonics Fun Animal Bus™! Learn letter names and sounds as you take a ride with Scout and his musical bus loaded with wacky animals. Beep, beep!

$LeapFrog-6013-Phonics-Fun-Animal-Bus-product $1$$

INCLUDED IN THIS PACKAGE

One Phonics Fun Animal BusTM
One parent’s guide

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please keep this parent’s guide as it contains important information.

Unlock the packaging locks:

Rotate the packaging locks 90 degrees counterclockwise.
Pull out the packaging locks and discard them.

GETTING STARTED

BATTERY INSTALLATION

Make sure the unit is turned OFF.
Locate the battery cover on the bottom of the unit.
Use a screwdriver to loosen the screw and open the battery cover.
Install 2 new AA (AM-3/LR6) batteries into the battery box as illustrated. (The use of new alkaline batteries is recommended for maximum performance.)
Replace the battery cover and tighten the screw to secure it.

BATTERY NOTICE

Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable, or new and used batteries.
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if removable).
Rechargeable batteries are only to be charged under adult supervision.

PRODUCT FEATURES

On/Off/Volume Control Switch
Slide the On/Off/Volume Control Switch to turn the toy on and select the volume.
Activity Selector
Slide to choose an activity.
Music Button
Press to hear a fun learning song.
Letter Buttons
Press the letters to hear letter names, letter sounds and animal sounds.
Door
Open the door to hear fun phrases and sound effects.
Horn Button
Press to hear horn sound effects.
Ignition Knob
Twist to hear engine sound effects.
Wheels
Push the bus to turn the wheels and play a song.
Automatic Shut-Off
To preserve battery life, the Phonics Fun Animal Bus™ will automatically power down after several minutes without input or after continuously pushing the bus for 20 minutes.The unit can be reactivated by pressing any button or sliding the Activity Selector.

ACTIVITIES

Letters
Press the Letter Buttons to hear letter names and letter sounds.
Animals
Press the Letter Buttons to hear animal names and their sounds.
Game
Listen to the letter names. Press the correct letter to help passengers get off the bus.
Music
Listen to Scout’s animal song. When he stops singing, press a letter to add a new animal to the song.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries when the unit is not in use for an extended period of time.
Do not drop the unit on a hard surface and do not expose the unit to excess moisture.

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these steps:

Turn the unit OFF.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit back ON. The unit will now be ready to play again.
If the unit still does not work, replace it with an entire set of new batteries.

Environmental phenomena.

The unit may malfunction if subjected to radio-frequency interference.
It should revert to normal operation when the interference stops.
If not, it may become necessary to turn the power OFF and back ON or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

IMPORTANT NOTE: If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. or email support@leapfrog.com. Creating and developing LeapFrog® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-3 (B)/NMB-3(B)

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Supplier’s Declaration of Conformity

Trade Name: LeapFrog®
Model: 6013
Product name: Phonics Fun Animal BusTM
Responsible Party: LeapFrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100, Emeryville, CA 94608
Website: leapfrog.com

Visit our website for more information about our products, downloads, resources, and more. leapfrog.com For warranty information, please visit leapfrog.com/warranty.

91-003418-003

FREQUENTLY ASKED QUESTIONS

What are the dimensions of the LeapFrog 6013 Phonics Fun Animal Bus?

The dimensions of the LeapFrog 6013 Phonics Fun Animal Bus are 4.65 x 12.13 x 6.54 inches.

How much does the LeapFrog 6013 Phonics Fun Animal Bus weigh?

The LeapFrog 6013 Phonics Fun Animal Bus weighs 1.69 pounds.

What is the item model number for the LeapFrog Phonics Fun Animal Bus?

The item model number for the LeapFrog Phonics Fun Animal Bus is 80-601300.

What age range is the LeapFrog 6013 Phonics Fun Animal Bus recommended for?

The LeapFrog 6013 Phonics Fun Animal Bus is recommended for children aged 12 months to 4 years.

What type of batteries does the LeapFrog 6013 Phonics Fun Animal Bus require?

The LeapFrog 6013 Phonics Fun Animal Bus requires 1 AAA battery.

Who is the manufacturer of the LeapFrog 6013 Phonics Fun Animal Bus?

The manufacturer of the LeapFrog 6013 Phonics Fun Animal Bus is VTech.

What is the price of the LeapFrog 6013 Phonics Fun Animal Bus?

The LeapFrog 6013 Phonics Fun Animal Bus is priced at $24.99.

What is the warranty period for the LeapFrog 6013 Phonics Fun Animal Bus?

The LeapFrog 6013 Phonics Fun Animal Bus comes with a 3-month warranty.

What kind of educational content does the LeapFrog 6013 Phonics Fun Animal Bus offer?

The LeapFrog 6013 Phonics Fun Animal Bus offers phonics and animal recognition activities designed to support early learning.

What materials are used in the construction of the LeapFrog 6013 Phonics Fun Animal Bus?

The LeapFrog 6013 Phonics Fun Animal Bus is constructed from durable plastic designed for young children.

Does the LeapFrog 6013 Phonics Fun Animal Bus require any special setup?

The LeapFrog 6013 Phonics Fun Animal Bus is ready to use with a simple setup that includes inserting the required AAA battery.

What features make the LeapFrog 6013 Phonics Fun Animal Bus engaging for toddlers?

The LeapFrog 6013 Phonics Fun Animal Bus features interactive buttons, engaging sounds, and educational phrases that make learning fun and interactive for toddlers.

What should I do if my LeapFrog 6013 Phonics Fun Animal Bus is not turning on?

Check the batteries to ensure they are properly installed and have sufficient charge. If the batteries are new or fully charged and the toy still doesn’t turn on, the internal connections or components may be faulty.

Why is the LeapFrog 6013 Phonics Fun Animal Bus not responding to button presses?

Ensure that the batteries are properly installed and charged. Check for any obstructions or debris around the buttons. If the toy still doesn’t respond, there may be an issue with the internal electronics.