PHILIPS GA69CT Cloak Decorative Pendants Instruction Manual
- August 10, 2024
- Philips
Table of Contents
PHILIPS GA69CT Cloak Decorative Pendants
Specifications
- Type: Pendant light
- Mounting: Surface-mounted or track-mounted
- Power Supply: 220V, 50Hz (indoor), 240V, 60Hz
- Socket Type: E27
- Max Wattage: 11W
- IP Rating: IP20
- IK Rating: IK02
- Dimensions: 130mm x 104mm (Surface-mounted), 1.75m/3.00m (Track-mounted)
Product Usage Instructions
Installation Guidelines
- The luminaire shall be installed by a qualified electrician following IEE electrical regulations.
- Only install the luminaire indoors.
Bulb Compatibility
- Use bulbs that are suitable for a maximum of 11W.
- Only LED-based lamps should be used in the luminaire.
Maintenance
- Clean with a dry cloth duster, avoiding abrasives or solvents.
- Do not allow liquids to come into contact with any parts of the luminaire.
Safety Precautions
- This luminaire is not to be used as emergency lighting.
- If the external flexible cable is damaged, contact the manufacturer or a qualified person for replacement.
Usage Restrictions
- Never disassemble the track-mounted luminaire while the light is on.
- Ensure proper handling of electrostatic-sensitive devices during installation and maintenance.
WHATS IN THE BOX
TOOLS
SYMBOLS
DIMENSION
SETTING
Pendant Surface-mounted
INSTRUCTION
Pendant track-mounted (PT) GA69
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- The luminaire should only be installed indoors.
- MAX 11W: only use bulbs suitable for this product and keep within the specified wattage.
- In the luminaire only LED based lamps shall be used.
- This luminaire is not suitable for use as emergency lighting.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. Maintain with a dry cloth duster, do not use abrasives or solvents. Avoid liquids on all parts.
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
Disconnect before servicing
Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
Disposal of the product.
This product is made of high quality materials and components that can be recycled and reused. If a product is marked with the crossed-out circular garbage can symbol shown here, it means that it is subject to the European Directive 2012/19/EU. You should check the information about local facilities collecting used electrical and electronic products and their packaging on your own. Local regulations prohibiting the discarding of equipment and packaging together with municipal waste must be strictly observed. Proper disposal of used packaging and product will help to avoid potential harmful eff ects on the environment and human health.
FAQ
What type of bulbs can I use with this pendant light?
You should only use LED-based lamps with a maximum wattage of 11W for this
luminaire.
Can I install this luminaire outdoors?
No, this luminaire should only be installed indoors.
How should I clean this pendant light?
Use a dry cloth duster for maintenance; do not use abrasives or solvents and
avoid contact with liquids.
2024-07-09
4422 948 62445
© 2024 Signify Holding. All rights reserved
Data subject to change without notice
Keep for future reference: https://pro.mycreation.lighting.philips.com/