PROAIM P-ZTLT-01 Z-Tilt Head Camera Instruction Manual

PROAIM P-ZTLT-01 Z-Tilt Head Camera

Product Specifications

• Product Name: Z-Tilt Camera Head (Pan-Tilt) (P-ZTLT-01)
• Includes: 1/4 Camera Bolt, 3/8 Converter, Z-Tilt Camera Head, L-Type Allen Key (3mm)
• Features: 5.23 height adjustments, horizontal camera extension capabilities, slider shot range up to 6.7
• Mounting: 3/8-16 threaded mounting hole with adapter bushing for compatibility with tripods and sliders

Product Usage Instructions

• Z-Tilt Camera Head Setup
  Follow the assembly manual to set up the Z-Tilt Camera Head properly.

• Z-Tilt Camera Head Mounting
  Mount the Z-Tilt Camera Head securely on a compatible tripod or slider using the 3/8-16 threaded mounting hole and adapter bushing.

• Z-Tilt Camera Head Rotation
  Adjust the Z-Tilt Camera Head for rotation to achieve the desired angle for your camera shots.

• Camera Mounting
  Use the included 1/4 Camera Bolt and L-Type Allen Key (3mm) to mount your camera securely on the Z-Tilt Camera Head.

FAQ

• Q: What is the maximum slider shot range of the Z-Tilt Camera Head?
  A: The Z-Tilt Camera Head offers a slider shot range of up to 6.7 for extended camera movement capabilities.

• Q: How do I ensure compatibility with my tripod or slider?
  A: The Z-Tilt Camera Head features a 3/8-16 threaded mounting hole and included adapter bushing to ensure compatibility with a wide range of tripods and sliders.

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo- copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Z-Tilt Camera Head Setup

Z-Tilt Camera Head Mounting

• Remove the 3/8″ converter from the bottom of the Z-Tilt camera head using a screwdriver (Not Included).
• Then, mount the Z-Tilt camera head on the Tripod (Not Included).

Z-Tilt Camera Head Rotation

• Now, loosen both the locking knobs and adjust the camera head’s position.
• Once the camera head is at the desired position, re-tighten both the locking knobs.

NOTE : The head features 5.23″ height adjustments, horizontal camera extension capabilities, and increased slider shot range of up to 6.7″.

• Remove the 3/8″ converter from the top of the Z-Tilt camera head using a screwdriver.
• Then, mount the 3/8″ converter on the knob and securely tighten it.

Camera Mounting

• Loosen the knob of the Z-Tilt camera head and mount the Camera (Not Included) on it.
• Tighten the knob to secure it.

The Camera is now securely mounted on the Z-Tilt camera head.

FEATURE : Its 3/8″-16 threaded mounting hole and included adapter bushing ensure compatibility with a wide range of tripods and sliders.

Different Pan-Tilt Adjustments

YOUR PROAIM Z-TILT CAMERA HEAD ALL DRESSED UP AND READY TO GO!

Warranty

We offer a one-year warranty for our products from the date of purchase. Within this period, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs, nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by us.

Liability : We are not liable for damage caused by products we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product or service by anyone other than our company.
Contact Us: If you are dissatisfied, please contact us immediately. We promise our utmost support and care until you use our product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>