SKCT FD08 Clip On Bluetooth Headset Instruction Manual
- August 9, 2024
- SKCT
Table of Contents
SKCT FD08 Clip On Bluetooth Headset
Specifications
- Product Model : FD08
- Product Name: Clip-on Bluetooth Headset
- Headphone Color: Black, White, Skin Tone
- Headphone Material: Nylon, PC+ABS
- Bluetooth Protocol: 5.3
- Charging Time: 1.5 Hours
- Talk Time: 2.5 Hours
- Music Playback: 3 Hours
- Battery Capacity: 30mAh
- Charging Current : DC5V, 20mA
- Channel: Dual Speaker, Stereo
First of all, thank you for using our products! Please read this manual before using it to correctly use this product. For better service, the contents of this user manual may be changed. Changes due to such performance and functionality will not be notified。
Product
- Model : FD08
Product Name: Clip-on Bluetooth Headset
-
Product Parameters:
Headphone Color: Black, White, Skin Tone -
Headphone Material: Nylon, Potabs,
-
Bluetooth Protocol: Charging Time: 1.5 Hours
-
Talk Time: 2.5Hours
-
Music Playback: 3 Hours
-
attery Capacity: 30mah’2
-
Charging Current: Dc5v,20ma
-
Channel : Dual Speaker, Stereo
Packing list
- Headset*2
- Packaging
- Charging
- Box’1
- Instruction
- Compartment*1
- Manual*1
- Charging
- Warranty
- Cable *1
- Card
Quick Guide
Warning
- Before using this device, please read all safety information to ensurecorectandsafetye.
- Using charging lines that are not approved by this manufacturer may cause fire, explosion, or other hazards.
- Do not disassemble, repair, or modify this product for any reason, otherwise, it maycause a free electronic break or even complete damage to this product.
- Please use this device within the temperature range of O “Cto35′, and store the device and its accessories within the range cf-10°Cto45°C. When the ambient temperature is too low or too high, it may cause equipment failure.
- If charging is complete, please disconnect the charger from this product and unplug the charger from the power outlet”. Do not change continuously for more tha12 hoursrs.
- Donot wet orimmerse the productinliquidcontact.
- Please do not throw the product into domestic garbage, as improper disposal may cause battery fire and explosion n. Please comply with local regulations when handling this product and other accessories.
- This product has a built-in on-removable lithium battery. It is prohibited to disassemble, or bump. squeeze. or put the battery on fire. If there is severe expansion please donotuseitintermittenty.
- Do not place the magnetic suction charging cable or earphone magnetic suction charging port close to metal objects, as magnets may attract metal objects, which maycause contact shorting and lead to hazards. Avoid personal injuries such as burns and scalds caused by overheating the battery.
- Do not put this product or battery into fire, otherwise, it may cause a fire or explosion.
- Do not expose the earphones to sunlight for a long time, as they may easily deform, age, or break.
- Please comply with relevant laws and regulations and do not use in the following environments.
San Bao Servke Content
Within 7 days from the date of receipt the goods received are in good
condition the product packaging and accessories are complete, and there is no
man-made damage to the performance fault, the payment can be refunded at their
voice price in a lump sum, or thesamemodeland specificatonofproductscan be
replaced, orfreerepaircanbemade” “Wthinthe sth to 15thdaystfrom the date of
receipt, if the product suffers from performance failures thatarenotdamaged by
anyone, it can be replaced with products of the same model and specification.
Product placement is the responsibility of the seller.
“Within the warranty period, if the product cannot be used normally after two product replacements. you can choose to repair or replace products with these remodeling specifications based on the warranty certificate and valid replacement records provided by the seller after testing and confirmation:
- Customized products do not comply with the San Bao policy.
Howtoobtainserice
To protect your legitimate rights and interests, enjoy the three guarantees of
service.
When you request a San Bao service, you must provide:
- Original copies purchased products;
- The orginalinvoiceor purchases a record certificate from the seller when purchasing the product;
- Valid San certificate.
Service Information
Situations not covered by warranty services
- The product exceeds the three guarantees validity period;
- Without a San Bao certificate and valid invoice, and unable to prove that the purchased product is within the San Bao validity period;
- The warranty certificate does not match the product model identification or the warranty certificate has been altered:
- Damage caused by failure to use, maintain, or maintain by the requirements of the UserManual, or the use of nonoriginal accessories;
- Unauthorized maintenance, modification, misuse, collision, drop, extrusion liquid ingress, corrosion;
Tearing, altering. or illegible product labels, seals, and serial numbers(SN);
- Damage caused by force majeure such as floods, fires, lightning strikes, etc;
- Defects caused by normal wear or aging of the product;
- Products not sold in Chinese Mainland.
WARRANTYCARD
“The above information shall be filled in by the seller
FCC
FCC WARNING
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used under the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
FAQ
- Q: What should I do if the product needs service?
- A: To obtain service, provide original copies of purchased products, the original invoice or purchase record certificate, and a valid San Bao certificate.
- Q: What is not covered by warranty services?
- A: Situations not covered include lacking a valid San Bao certificate or invoice, inability to prove product purchase within the warranty period, mismatched warranty certificate, or altered warranty certificate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>