Shenzhen SKCT Technology BG-02 Smart Audio Glasses User Manual
- June 5, 2024
- Shenzhen Skct Technology
Table of Contents
Shenzhen SKCT Technology BG-02 Smart Audio Glasses
Instruction
Great thanks for using our products! Please read this manual before using the
product. The contents of the manual are subject to modifications for better
service. Modifications due to changes of performance and functionality of the
product if needed is without prior notification.
Product Name: BG-02
Model no.: BG-02
This product, easy to operate and practical, is a portable bluetooth glasses
with stereo sound and an elegant appearance.
Designed by SKCT in China and manufactured in China.
Product Parameter
-
Frame color: Black
Lens color: Black -
Frame material: Acetate Fiber,PC+ABS Lens material: Nylon
-
Charging time: About 2 hours
-
Playing time: About 6 hours
-
Standby: Above 100 hours
-
Battery capacity: 120mAh*2
-
Charging current: DC5V, 200mA
Packing List
- Glasses*1
- Charging cable*1
- Glasses cloth*1
- Glasses case*1
Operations
Tips: To quickly find the touch button, use your finger to slide from the middle
of the glasses legs to the front until touch the button. At this time, A finger
off counted as a click operation. Separating the legs of the glasses to awake
the device, within 5 seconds the left and right leg of the glasses will
automatically matching up. Enters Bluetooth connection mode, which allows you
to find Bluetooth devices and complete the connection.
On/Off
- Separating the legs of the glasses to awake the device, beep “prompt voice”, indicator light blinks slowly.
- Closing the legs of the glasses to shut down the device, beep “prompt voice”, indicator light lasts for 1 second.
- Disconnected to the phone for 10 minutes, the product will automatically power off, beep “prompt voice”.
- While power on, click the left or right leg 5 times, the product will power off, beep “prompt voice”.
Bluetooth Pairing Connection
-
For first pairing, the glasses will automatically enter into pairing status within 5 seconds while power on, beep “searching for the devices” and the indicator light blinks quickly.
-
When power on, click button 4 times in a row and hold for 5 seconds to clear the pairing records, the beep “Factory reset successful”. The indicator light blinks quickly.
-
When re-connecting successed, beep”prompt voice”;
Also when disconnected, beep “prompt voice”. -
When no pairing record found, the device will automatically enter into searching status. When pairing record be found, the glasses will connect with the last devices.
Play Music
- For the next track, long press the right button over 1.5 seconds.
- For the previous track, long press the left button over 1.5 seconds.
- Music pause/play, double click the left or right button.
Call Functions
-
To answer the call, double click the left or right button.
-
To end the calling, double click the left or right button.
-
To reject the call, long press the left or right button over 1.5 seconds
-
While on the phone, click the left or right to add-on the Third Party while holding the call;
Double-click the left or right button to end the call and accept the third- party call. -
In a three-way call, click the left or right button to end the current call and get through the previous held call; Double-click the left or right button to hold the call and get through the previous held call.
Voice Assistant
Triple-click the left or right button to activate the assistant and voice
interaction.
Charging
- Low battery alarm, beep “prompt voice” , indicator light blinks once every 10 seconds.
- When charging, the indicator light blinks slowly. The indicator light is on when charging completed.
Prompts
- Please read the instruction manual thoroughly before using the product. Always include and keep this safety guide.
- Fully charged before the first use.
- When not using the battery pack for extended periods of time(every 2 weeks), please charge before using.
- Do not wipe the lens directly, wet the lens first and then use velvet and absorbent eyeglass cloth wiping in the same direction gently. Wiping back and forth or in circular is not suggested.
Warnings
- Before using, read all the safety information to ensure proper and safe operation.
- Only use a charging cable recommended by the manufacturer or otherwise may cause fire, explosion or other accidents.
- In case of fire, electronic damage or even complete scrap of the product, please do not dismantle or refit the product for any reason.
- Only use the product at ambient temperature between 0℃～35℃ and keep the product as well as the accessories at temperature betwee -20 ℃～45℃ for temperature too low or too high may cause functional faults. n
- When charging completed, disconnect the charger from the product and the charger from the socket. Do not exceed 12 hours of continuous charging time.
- Always keep the product dry.
- The product must not be disposed with normal household waste to avoid battery fire or explosion. For packing disposal, please observe the legal regulations in your country.
- This product is with a built-in-non-removable lithium battery, which must not be disassembled, bumped, squeezed or exposed to fire. For any serious expansion of batteries, please stop using.
- Maintain a distance between the product components containing the magnet (the glasses legs and the charging cable) and metal objects to avoid danger of electrical short-circuit which will lead to the overheating of the battery and cause personal injuries such as skin burns.
- The product must not be exposed to or thrown into fire to avoid explosion.
- Do not expose the product to sunlight for a long time to avoid corrosion or deformation.
- Only use the product complying with the relevant laws and regulations, and do not use in the following environments.
- Do not use the product in the vicinity of gas stations, oil depots, chemical warehouses, etc., where flammable or explosive gas or chemicals are stored.
- Do not use this equipment in hospital operating rooms, emergency rooms, intensive care units, etc for the magnetic fields could cause interference with cardiac pacemakers implanted defibrillators (ICDs), hearing-aid, cochlear and other implants. Always keep a at least 15-Centermeter distance to the peacemaker.
- lease consult your physician and the device manufacturer if you want to use this device near personal medical equipment.
- lease do not use the product in an environment that requires special attention such as in traffic, driving.
- Do not use the product outdoors during thunderstorms to avoid lightning strikes.
- Do not use the charger in a high humidity area such as a bathroom, as electric shock, personal injury, fire and the charger damage may result.
- Please comply with any legal requirements that expressly prohibit the use of the product in any environment.
- Do not listen at high volume for long periods of time to prevent hearing damage.
FCC Warning.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interfere-nce that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsi-ble
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the inst-
ructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installat-ion. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.