boAt STONE 350 Pro Bluetooth Speaker User Manual
- August 8, 2024
- Boat
Table of Contents
boAt STONE 350 Pro Bluetooth Speaker
Manual
Thank you for purchasing boAt Stone 350 Pro. You are now just a step away from
the realm of pure audio bliss. Please follow this user manual carefully in
case of any doubts and difficulties that arise. Please note that playtime will
vary depending on the selected volume level. You can stay plugged into the
sound via Bluetooth wireless technology, TF card, and AUX wire compatibility.
This portable speaker has been designed with a smooth interface that requires
minimum effort.
PACKAGE CONTENTS
- 1x boAt Stone 350 Pro
- 1x User Manual
- Ix Type-C Charging Cable
- 1x Audio Cable
PRODUCT OVERVIEW
Button Functions
BLUETOOTH PAIRING
- Long press the power button to switch on the speaker. The speaker enters Bluetooth pairing mode automatically with a blinking white LED to indicate the same.
- Activate the Bluetooth on your smartphone and search for “Stone 350 Pro” to connect.
- Select “Stone 350 Pro” from the list of available devices.
- Congratulations! The Stone 350 Pro speaker is now connected to your phone via Bluetooth indicated by a tone prompt.
Note
- Stone 350 Pro remembers previously connected devices; once switched on, the speaker automatically reconnects to the previously connected devices within the working range
- If pairing is unsuccessful, please remove “Stone 350 Pro” from the list of paired devices on your phone, bring the phone closer to the speaker, and try pairing again.
OPERATING INSTRUCTIONS
AUX MODE
- Connect one end of the appropriate cable to the AUX input of the speaker and the other to the external device.
- Short press the M button to select the AUX connectivity mode.
- In AUX mode you can control the audio playback via the media device/phone.
Note
- In AUX mode it is necessary to carry out the operation directly from the connected external device.
- Please note that you cannot accept/reject incoming calls in AUX mode.
TWS FUNCTION
Turn on the two Stone 350 Pro speakers that you require to be forged into one, both in Bluetooth mode. You only need to set one of the two units and follow the steps below-
- Press and hold the button on one of the speakers for about 2 seconds until you hear a beep.
- Release the button and wait for a few seconds for the two speakers to connect
- Enable Bluetooth on your mobile phone and search for “Stone 350 Pro” to pair:
- Select “Stone 350 Pro” to play music through the two paired speakers.
TF CARD MODE
- Long press the power button to switch on the speaker.
- Insert a Micro SD card into the TF card slot and it will switch to TF card mode automatically:
- Short press the button to play/pause audio.
- Short press the + button in steps to increase the volume level and long press it to skip to the next track. Short-press the- button to decrease the volume level and long-press it to return to the previous track.
RESET FUNCTIONALITY
- Perform the Reset function if the speaker doesn’t turn off or doesn’t respond properly.
- Step: Press and hold the power button for 8 seconds.
- The Bluetooth connection history of the speaker will be cleared and go back to the default settings.
Use a pointed object to prick the reset button near the TF Card Slot to set the speaker to default settings.
CHARGING
- When the battery is low, the speaker will make a beep sound once every 5 minutes. After 3 such indications, the speaker will automatically switch OFF.
- Insert the provided charging cable to charge the speaker.
- When the speaker is in charging mode, the LED remains solid red. The LED indicator turns off once the speaker is fully charged:
Note
Please avoid using the speaker while it is charging, as this may decrease the
battery’s performance.
SPECIFICATIONS
- Product Type: Portable Wireless Speaker
- Bluetooth Version: V5.3
- Bluetooth Profiles: BT v5.3+BR+EDR+BLE
- Working Range: 10 m
- Driver Size: 2″
- Compatibility: BT/AUX/TF Card
- TWS Function: Yes
- Frequency: 20Hz-20KHz
- Signal to Noise Ratio: ≥60dB
- Input Voltage: 5 V/1 A
- Output Power: 14W
- Play Time: Up to 12 hours (At 60% volume)
- Talk Time: Up to 32 hours
- Standby Time: 32 hours
- Charging Time: 2 to 2:5 hours
- Battery Capacity: 3600 mAh @3.7V
- Water Resistance: IPX5
Playtime may vary according to the music type & the volume level.
CHARGING NORMS & GUIDELINES
Note
Any other accessory can be used to charge the product as long as the above-
mentioned norms are followed.
WARNING
- Please charge the speaker according to the charging norms mentioned to protect the battery.
- Please do not disassemble, repair, or modify this product by yourself without authorization.
- Please do not submerge the product in water.
- Please keep this product safe from coming in contact with liquids.
- Please store and use this product in an environment of normal temperature.
- Please do not expose this product to extreme temperatures.
- Please keep this product away from heat sources, such as radiators, stoves, etc.
- When cleaning this product, please use a soft cloth or slightly damp cloth if necessary. Please do not use chemicals for cleaning.
- In order to have an extended product life and protect your hearing, please avoid listening to songs on maximum volume for a long time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>