Karibu 26628 Saunahaus Ralf Instruction Manual

Karibu 26628 Saunahaus Ralf

Product Specifications

• Dimensions : 1920 x 1608 x 2156 mm
• Material : Wood
• Various components included : B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, B13, B14, B15, B16, B17, B18, B19, B20, B21
• Component sizes range from 20mm to 45mm in thickness

Product Usage Instructions

Check Package Contents
Before starting assembly, compare the list of materials provided in the manual with the contents of your package to ensure everything is included.

Assembly Steps

1. Start by determining the length required for each component.
2. Follow the provided diagrams and instructions to assemble the various components in the correct order.
3. Use the specified accessories when indicated to ensure proper installation.
4. Temporarily fix components in place as needed during assembly.
5. Refer to the inventory list of the house to ensure all components are used correctly.

Building Instructions

First compare the list of materials with your package contents! Please understand that complaints can be processed in the non-built status only!

Required Tools

Exploded View

Accesories

1. Length must be determined and sawn
2. Not needed
3. with accessories!
4. Fixed temporarily
5. Inventory of the house

Installation Instructions

Glue! Look for the same height

Roofing felt installation

Note! This description is only an example!
The number of bitumen strips to be used depends on your actual house size. When joining rolls of roofi ng felt end to end, the overlap must be aproxximately 10cm. The roof is not safe to walk on. The roof is designed for a total load (snow, wind) and not for a point load. We recommend you to always support the roof from below during installation. The sealing of the roof surfaces to adjacent components with bitumen sealant has to be eff ected by the customer! If it is a saddle-roofed house, do not use roofi ng tiles for roofi ng. In this case, a 20 cm wide strip of bitumen with overhang should be installed on both sides of the eaves. For houses with a tonne roof, please install a bitumen roofi ng under the shingles. In the case of a fl at roof the laying of roof shingles is not possible!

This fi gure shows the functional principle of the board. Regulate the exhaust air according to your own wishes.

Building Instructions

First compare the list of materials with your package contents! Please understand that complaints can be processed in the non-built status only!

Handling

The guarantee is conditional on proper upkeep!
For lasting protection of the value and suitability for use, professional care and maintenance is also recommended during the warranty period; this is not included in the warranty obligations. Defects must be repaired immediately upon detection.
Wood protection treatment of the door
All parts of the door must receive wood protection treatment. Those sections of the wood, which will not be accessable after installation, should receive complete treatment before installation. Treat the product with a blue stain blocking coat; afterwards apply a double protective coating of an open-pored wood-protection glaze. Application of a protective coating should be repeated at least every two years.

Please beware that the inserted plates of other material may come to differ in colour to the doors if you use unsuitable coating material. With coloured andboiler pressure impregnated houses, only the exposed natural wood (saw cuts) and parts should need extra treatment.

You can obtain an even colour covering in inside areas with one coat of paint. For that you should use an open-pored, acrylic based water dispersed lacquer. In order to guarantee a long service life of your product you should repair damaged areas immediately. Do this by whetting the damaged area and apply a new coat of paint. Enquire about suitable glazes at your local paint retailer. Furthermore, you can seal the joining of the wood-window pane with a suitable sealant to guarantee a long service life of the door and prevent leakage from heavy rain. If these precautions of care are not properly carried out, it can result in deformation, blue stain, fungus infestation in the doors and frames and loss of warranty.

Maintenance

Cleaning
Regular cleaning and care is a prerequisite for preserving the service life and functionality of high-value products. Cleaning is to take place outside, inside  and also in the rabbet-area. The cleaning agent used must be suitable for therelevant material; please do a test before you start cleaning.

Care of the door

Deformation of the door
Wood reacts to environmental influences. Weather exposure will lead to swelling and contraction of the wood. This causes variances of dimensions and slight deformation. Dependant on the weather exposure, the door may need realignment by turning the hinges in- or outwards. Some door warpage is acceptable as long as the door can be made to function through the alignment options specified here. The warranty does not cover damage caused by use of excessive force.
Adjustment of the door
The door must be accurately adjusted to ensure trouble-free operation. The door frames must be installed right-angled and perpendicular. Furthermore, they must be installed so the width of the frame is the same at the top and bottom. If the door doesn’t close or if one panel is askew, this can be rectified by limited in- or outwards turning of the hinges. You can turn the hinges outwards up to 5 rotations. If you have a double-door, the door to be secured must always be correctly aligned at the top and bottom with the appropriate hinges.

Frequently Asked Questions

Q: What should I do if a component is missing from my package?
A: If a component is missing, please contact customer support with your order details to request a replacement.

Q: Do I need to cut any of the components during assembly?
A: Yes, some components may require cutting to the specified lengths as indicated in the manual.

Q: Are all the necessary accessories included in the package?
A: The necessary accessories are included in the package. Make sure to use them as instructed during assembly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>