GRANBERG UIS-110.0340-WEB Winter Gloves Instructions
- August 7, 2024
- GRANBERG
Table of Contents
GRANBERG UIS-110.0340-WEB Winter Gloves
Specifications
- Product Name: Personal Protective Equipment Gloves
- Model Number: ART. 110.0340
- Quantity: 12 pairs
- Category: Category I
- Size Options: 8.5/M, 11/2XL
- Standard: EN ISO 21420:2020
Product Usage Instructions
Choosing the Right Size
Ensure you select the correct glove size for optimal protection and grip.
Refer to the sizing chart provided based on EN ISO 21420 standards.
Putting on the Gloves
- Carefully insert your hand into the glove.
- Ensure the gloves fit snugly but comfortably.
Proper Care and Maintenance
After each use, clean the gloves according to the manufacturer’s
instructions. Store them in a cool, dry place away from direct sunlight.
FAQ
-
Q: How do I determine the right size for me?
A: Refer to the size chart provided based on EN ISO 21420 standards. Choose the size that corresponds to your hand measurements for a proper fit. -
Q: Where can I obtain the Declaration of Conformity?
A: The Declaration of Conformity can be obtained from https://www.granberg.no/catalog/110.0340
This product is classed as Category I Personal Protective Equipment (PPE) according to PPE Regulation (EU) 2016/425 and has been shown to comply with this Regulation through the Harmonised Standard EN ISO 21420:2020. Declaration of Conformity can be obtained from https://www.granberg.no/catalog/110.0340
Wear the products of suitable sizes to provide optimal level of protection and maximum grip. User must only choose the glove fitting the size of her/his hand.
User Manual issue date: 23.01.2024
Granberg AS, Bjoavegen 1442, NO-5584 Bjoa, NORWAY
Machine knitted seamless glove made of Spandex® and hollow-core Thermolite
fibre that wicks good perspiration away from skin. Well fitted, provided good
touch sensitivity and thermal insulation. Great as an inner glove. Suitable
for working in cold storages and/or regular outdoor utility work.
Storage/Transport: The gloves are first packed in plastic bags which are
subsequently packed in cardboard boxes for transport and storage. Granberg
recommends storing unused gloves in original packaging. Prevent direct
sunlight.
Maintenance/Washing instructions: Both new and used gloves should be
inspected before use, and before putting them on to make sure that there is no
damage to them. If in doubt, discard the gloves and select a new pair. Leaving
the gloves in a contaminated condition may cause a deterioration of quality.
Gloves comply with the cleaning standard ISO 6330:2012; the test was performed
on unused gloves. Gloves’ performance is guaranteed by the manufacturer for up
to 5 washes. Washing must be performed using a domestic washing machine and
standard liquid detergent at 40 °C, tumble dry at low temperatures. Washing
does not alter the gloves’ mechanical performance. Gloves must be dry before
each use.
The customer holds sole responsibility for complying with the washing/drying
instructions. Improper washing/drying can influence the gloves’ performance.
Manufacturer can accept no responsibility once gloves have been washed.
Obsolescence: When stored as recommended, unused gloves will not suffer
any change in their mechanical properties for up to five years from the date
of manufacture. Service life depends on application and maintenance and cannot
be specified. It is the responsibility of the user to ascertain the
suitability of the gloves for the user’s tasks.
Donning/Doffing: Select the right size glove for your hand. Hold the
glove by the cuff with one hand. Align the glove thumb with your other hand
thumb and slide your hand into the glove, one finger into each finger. Pull by
the glove cuff and align fingers into the right position. Use the same
procedure for the other hand. If gloves are not contaminated, pull by the
fingertips to doff the gloves. If gloves are contaminated, hold the glove cuff
and pull toward the finger until the gloves come off.
Please note: Inspect the gloves for damage before use. The gloves shall
not be worn when there is a risk of entanglement with moving parts of
machines. Gloves meeting the requirement for resistance to puncture may not be
suitable for protection against sharply pointed objects such as hypodermic
needles. Gloves containing latex may cause allergic reactions in case of
hypersensitivity to latex. Seek medical advice if applicable. None of the raw
materials used in glove, or process of manufacturing it, are known to be
harmful to the user. These gloves are intended to protect hands in working
environment in accordance with EN ISO 21420:2020. It is the responsibility of
the user to evaluate and determine risks based on the intended application.
The gloves should only be used for applications declared suitable by the
manufacturer. Risk should be evaluated keeping in mind the protection levels
and the harmonized standards on which gloves are tested. The results of the
tests should help in glove selection, however it must be understood that
actual conditions of use cannot be simulated and it is the responsibility of
the user, not the manufacturer, to determine glove suitability to the intended
use. Further information may be obtained from manufacturer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>