Suncomfort Varioflex Free Arm Parasol Instruction Manual
- June 4, 2024
- Suncomfort
Table of Contents
Varioflex
Instruction manual
Intended Use
This product serves as equipment for protecting the human body from solar radiation. The product may only be used in private households, in catering, and in hotels in comparable environments. The product may only be used according to these instructions for use. Any use other than as described in these instructions for use is considered incorrect use. The right of modification resulting from the technical pro- process is reserved. In these instructions, Varioflex is also referred to as the «product» or «sunshade».
Warning words used
! DANGER| an immediately dangerous situation, which could lead to death
or severe injuries.
---|---
!CAUTION| a potentially dangerous situation that could result in minor
or moderate injury.
!NOTICE| a situation that could lead to property damage.
Welcome!
Congratulations on buying your new Varioflex Solar LED. You have acquired a high-quality sunshade. These instructions are an integral part of the product. They contain important information about safety, use, and disposal for users of the product. Please make yourself familiar with all the information specified before using the product. If you follow the correct use and care, the Varioflex Solar LED will serve you well for years to come.
Optional accessories
There is a widely varied range of accessories for your sunshade. Ask your SUN COMFORT/GLATZ dealer about them, or visit www.suncomfort.com.
Technical data
Size [cm]| Area [m²]| Closing height [cm]| Clearance [cm]|
Total height [cm]| Base weight [kg]
---|---|---|---|---|---
300× 300| 9| 49| 222| 225| 120
330 × 270| 8.9| 35| 219| 254| 120
Details when using the cross base with swivel base.
Safety information
READ OVER ALL SAFETY INSTRUCTIONS CAREFULLY AND ENSURE THAT YOU UNDERSTAND THEM.
-
Ensure that every person that uses this product
has read these warnings and instructions and
complies with them. -
Save all safety information and instructions for future use. They must be given to subsequent users of the product.
-
The manufacturer is not liable for material damages or injuries which are caused by incorrect use or non-compliance with safety instructions. In such situations, the warranty will become void.
-
Children must not play with the product.
-
!DANGER Always keep children away from packing material – this poses a risk of suffocation. Children underestimate dangers. This product is not a toy. Children aged 8 years or over and persons with reduced physical, sensory or mental capabilities, lack of experience or knowledge may only use the product if they are supervised by a person who is responsible for their safety or if they have been shown how to use the product safely and they have understood the risks inherent in its use. Cleaning and maintenance tasks may not be carried out by children without supervision.
-
Do not use the product where concentration/attention is lacking or under the influence of drugs, alcohol or medication.
-
The product must be positioned in a base or ground socket with fixed anchorage.
-
When using a base, the minimum weight of the base is to be taken into consideration. Further information can be obtained from SUN COMFORT/ GLATZ or the retailer.
-
When using a fixed ground anchorage, the installation must be carried out by specially trained persons in accordance with the separate assembly instructions.
-
Do not light an open flame near or under the sunshade
-
Do not hang any objects from the sunshade’s supporting rods.
-
Do not let the product fall or be hit.
-
When opening/closing, ensure that no persons/ objects are in the area of movement. Otherwise, injuries/damages could occur
-
DANGER Close the sunshade in the rising wind, stormy weather, and/or snow.
-
Unsupervised sunshades may not be left open. Any possible damages do not fall under the warranty.
-
Always secure closed sunshades with the sewn-on closing strap or a suitable securing system.
-
Use only original accessories/replacement parts.
-
Changes to the product and technical modifications are not permitted.
Installation and start-up
|
---|---
unpacking the sunshade Supplied with:
– Sunshade
– Crank
– Solar panel
– USB Charging cable
– Protective cover
– 4 fastening screws/washers (fastening swivel base)
– 2 round-headed screws/washers (fastening mast)
– 2 Allen key
– Swivel base
– Operating instructions
Dispose of packaging material properly and keep it away from children. Do not
make use of defective material. In the event of any damage, inform the
transport service provider immediately.| Placing the sunshade down
Carefully place the sunshade on a clean, horizontal surface. The sunshade is
very heavy. Work in a threesome and hold the unshade securely.
|
Prepare the floor fastening
Place the floor fastening in accordance with the separate instructions. or…
Prepare the floor fastening weights and wind resistance
Size minimum weight
[cm] [kg] 40 x 40 x 4 120| Pre-assemble standpipe
2. Place swivel base on base
3. Adjust holes/position
4. Place 4 washers in position
5. Pre-assemble swivel base with 4 round-headed screws (M8 × 20mm
Pre-assemble sunshade
1. Place the sunshade on a swivel base
2. Attach sunshade tightly to swivel base, using 2 washers and
2 round-headed screws
3. Insert crank into the carriage
The sunshade is very heavy. Work in a threesome and hold the sunshade
securely.
Use
|
---|---
Opening the sunshade
1. Remove the protective cover
2. Loosen ribbons
3. Detached the carriage by means of a rotary knob and slide it upwards
4. Completely open the sunshade through the use of the crack
5. Make sure that the inner parts are engaging
The sunshade will be automatically aligned horizontally. For safe operation,
the inner parts must be completely engaged.| Positioning of the sunshade
A Tilt sunshade to the mast
1. Release the rotary knob, and adjust it to the desired inclination is
reached
B Tilting the sunshade left / right
1. Tilt the sunshade by cranking
C Rotate sunshade
1. Step on the pedal
2. Turn the sunshade to the requested position
|
Closing the sunshade
1. Release the rotary knob until the sunshade is completely closed
2. Squeeze the Tilt handle, pull down the carriage| Bind/protect the
sunshade
1. Pull out / wrap fabric segments
2. Secure the sunshade with the ribbons
3. Lift the protective cover above the sunshade section
4. Close the protective cover
To extend the service life of the covering material, GLATZ strongly recommends
the use of a protective sleeve when the sunshade is closed.
Maintenance and care
- Allow the sunshade to dry when open to prevent the formation of mold and discoloration.
- A protective sleeve protects the sunshade and will extend its service life.
- Only pull the protective sleeve over the dry sunshade when it is dry.
- Clean the protective sleeve and the sunshade cover when needed with lukewarm water and a sponge.
- Do not use any bleach or sharp objects, to avoid damage to the cover.
- Check the tightness of all screws from time to time and tighten them if necessary.
- If the sunshade is located in a highly exposed position, increased wear and tear must be expected. In such cases, we recommend more intensive care and maintenance.
- In most cases, defective sunshades can be repaired by your SUN COMFORT/GLATZ partner. Only use original replacement parts from SUN COMFORT/GLATZ.
Disassembly
Disassemble the sunshade if it is not going to be used for a longer period. WARNING! DANGER OF TIPPING. DANGER OF INJURY CAUSED BY SUNSHADE TIPPING OVER.
- Close the sunshade correctly and tie it up.
- Take the sunshade out of the base / of the ground socket and lay it down.
- Store the sunshade in a lying position along with all accessories in a dry place.
Warranty
Please contact your SUN COMFORT/GLATZ partner before returning the product. The warranty on the sunshade lasts for 24 months from the date of purchase. The warranty expires in the following cases:
- External application of excessive force
- Inappropriate operation or maintenance of the sunshade
- Damage arising from force majeure
The wind guarantee for an open sunshade is limited. If there are several
sunshades, a minimum distance of 20 cm must be maintained between any two of
them. Likewise, a minimum distance of 20 cm
must be maintained between the sunshade and walls.
Disposal
Dispose of the product in a recycling collection point intended for this
purpose. By correctly disposing of the product, you are helping to prevent
possible dangers for the environment and for health
that can be caused by incorrect disposal of old devices. The packaging is made
from environmentally friendly materials which can be disposed of in your local
recycling facility. The product consists
of metal and plastic parts. Disposal at the end of service life must be
carried out under the terms of the regional environment and waste regulations.
http://www.suncomfort.com/varioflex-solar-instruction
Repair service and instruction videos on
www.suncomfort.com
GLATZ AG, Neuhofstrasse 12, CH-8500 Frauenfeld
GLATZ France Sarl, 411 Allée des Noisetiers, F-69760 Limonest
Documents / Resources
|
Suncomfort Varioflex Free Arm
Parasol
[pdf] Instruction Manual
Varioflex, Free Arm Parasol, Varioflex Free Arm, Parasol, Varioflex Free Arm
Parasol
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>