nVent SK12ALA Single Piece Strut Clamp for Conduit Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent SK12ALA Single Piece Strut Clamp for Conduit
Specifications
- Product Name: SK Single Piece Strut Clamp for Conduit
- Material: Aluminum
- Conduit Size: 3/4 EMT, 3/4 Rigid/Pipe
- Catalog Number: SK12ALA
Product Information
Features
One piece break apart strut clamp for EMT and Rigid conduit.
Includes thread impression and captured screw.
Product Attributes
nVent products should be installed and used following the provided instruction sheets and training materials to prevent malfunction, property damage, bodily injury, or warranty void.
Product Usage Instructions
- Identify the appropriate conduit size (3/4 EMT or 3/4 Rigid/Pipe).
- Break apart the strut clamp if needed for installation.
- Place the clamp around the conduit ensuring a secure fit.
- Use the captured screw to tighten the clamp securely in place.
- Ensure proper alignment and positioning of the clamp to support the conduit effectively.
SK SINGLE PIECE STRUT CLAMP FOR CONDUIT, ALUMINUM, 3/4″ EMT, 3/4″ RIGID/PIPE
CATALOG NUMBER
SK12ALA
FEATURES
- One piece break apart strut clamp for EMT and Rigid conduit
- Includes thread impression and captured screw
PRODUCT ATTRIBUTES
- Material: Aluminum
- Outer Diameter: 23.4 – 26.7 mm
- Width: 31.8 mm
- Static Load: 667 N
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation,misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
FAQ
Q: Where can I find nVent product instruction sheets?
A: Instruction sheets are available at
www.nvent.com and from your nVent customer service
representative.
Q: What should I do if I encounter a malfunction with the strut clamp?
A: Contact nVent customer service for assistance and refrain from further
use until the issue is resolved.
Q: Can the strut clamp be used for conduit sizes other than 3/4 EMT or
3/4 Rigid/Pipe?
A: It is recommended to use the strut clamp only for the specified
conduit sizes for optimal performance and safety.
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>