nVent 1250250EG Caddy 125 Insulation Shield Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent 1250250EG Caddy 125 Insulation Shield
Product Information
Specifications
- Catalog Number: 1250250EG
- Material: Steel
- Finish: Pre-galvanized
- Outer Diameter: 76.2 mm
- Length: 304.8 mm
- Thickness: 1.3 mm
Product Features
This insulation shield is made of steel with a pre-galvanized finish. It has
an outer diameter of 76.2 mm, a length of 304.8 mm, and a thickness of 1.3 mm.
Additional Details
Install the insulation shield by the applicable code to ensure proper usage.
Diagrams
No specific diagrams are provided in this manual.
Warning
nVent products must be installed and used following nVent’s product
instruction sheets and training materials. Failure to do so may result in
product malfunction, property damage, injury, or voiding of warranty.
Contact Information
Contact nVent customer service representatives for support in Europe, Germany,
and other countries, as well as in APAC regions like Shanghai and Sydney.
Brands
- nVent’s powerful portfolio includes brands such as CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, and TRACER.
- © All brands mentioned are owned by their respective owners. nVent reserves the right to change specifications without notice.
Product Usage Instructions
Installation Process
- Ensure you have the necessary tools and equipment for installation.
- Refer to the applicable code for guidelines on installing insulation shields.
- Position the insulation shield at the designated location securely.
- Follow any specific instructions provided by nVent for proper installation.
- Double-check the installation to ensure it meets safety standards.
Maintenance Tips
To maintain the effectiveness of the insulation shield:
- Regularly inspect for any signs of wear or damage.
- Clean the shield as needed to prevent build-up that could impact its performance.
- Replace the shield if it shows significant wear or damage.
Safety Precautions
When using the insulation shield:
- Handle with care to avoid injuries or damage.
- Avoid overloading the shield beyond its specified capacity.
- Keep away from heat sources to prevent damage to the shield.
Storage Recommendations
Store the insulation shield in a dry and cool place away from direct sunlight
or moisture to maintain its quality.
Frequently Asked Questions (FAQ)
-
Q: Can I paint over the pre-galvanized finish of the insulation shield?
A: It is not recommended to paint over the pre-galvanized finish as it may affect the shield’s performance. Contact nVent for alternative solutions if needed. -
Q: What is the maximum temperature tolerance of the insulation shield?
A: The insulation shield is designed to withstand temperatures up to [specify temperature limit]. Exceeding this limit may result in damage to the shield.
CATALOG NUMBER
FEATURES
- Distribute load of pipe evenly to eliminate or reduce insulation compression, and risk of crushing at the hanger point
- Conforms with Federal Specification WW-H-171 (Type 41), Manufacturers Standardization Society ANSI®/MSS SP58 (Type 40)
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Pre-galvanized
- Outer Diameter: 76.2 mm
- Length: 304.8 mm
- Thickness: 1.3 mm
ADDITIONAL PRODUCT DETAILS
Install by applicable code.
DIAGRAMS
SAFETY WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
Contact information
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
-
Netherlands:
+31 800-0200135 -
France:
+33 800 901 793 -
Germany:
800 1890272 -
Other Countries:
+31 13 5835404
APAC
-
Shanghai:
+ 86 21 2412 1618/19 -
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>