nVent 389004 Caddy Super klip Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent 389004 Caddy Super klip
Specifications
- Catalog Number: 389004
- Features:
- Closes and locks automatically when the pipe, tube, or cable is inserted
- One-piece clamp for fast and convenient installation
- Can be fastened with a wood screw, dual-threaded screw or without collar, nail with collar, threaded rod, mounting plate, or shot-fire bracket
Product Usage Instructions
Installation
- Ensure the area where the clamp will be installed is clean and free of debris.
- Select the appropriate fastening method based on your application (wood screw, dual threaded screw, nail, threaded rod, mounting plate, or shot-fire bracket).
- Position the clamp around the pipe, tube, or cable and secure it using the chosen fastener.
- Verify that the clamp closes and locks automatically upon inserting the pipe, tube, or cable.
Maintenance
- Regularly inspect the clamp for any signs of wear or damage.
- Replace any worn components to ensure proper functionality.
Removal
- Unfasten the clamp from its mounting surface by removing the fastening hardware.
- Gently pull the clamp away from the pipe, tube, or cable to remove it.
FAQ
- Q: Can this clamp be used for outdoor installations?
- A: Yes, this clamp can be used for outdoor installations. Ensure proper corrosion resistance measures are taken for long-term durability.
- Q: What is the maximum pipe/tube/cable diameter that this clamp can accommodate?
- A: This clamp’s maximum diameter can accommodate [specify the diameter if available in the manual].
- Q: Can I use this clamp for high-vibration environments?
- A: Yes, this clamp is designed to handle vibrations. Ensure proper installation to prevent loosening due to vibrations.
CATALOG NUMBER
- 389004
FEATURES
- Closes and locks automatically when the pipe, tube, or cable is inserted
- One-piece clamp for fast and convenient installation
- Fasten with either wood screw, dual threaded screw with or without collar, nail with collar, threaded rod, mounting plate or shot-fire bracket
PRODUCT ATTRIBUTES
- Article Number: 389004
- Material: Xenoy®
- Temperature: −25 to 90 °C
- Outer Diameter: 19.5 – 21.8 mm
- Pipe Size: 1/2″
- B: 20 mm
- C: 39.4 mm
- Static Load: 200 N
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury, and death or void your warranty.
CONTACT
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. nVent.com
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent