nVent USC020EG Universal Strut Clamp for Pipe Conduit Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent USC020EG Universal Strut Clamp for Pipe Conduit
Product Information
The USC020EG is a versatile product designed to securely attach to the open side of a strut channel using two clamps, a nut, and a bolt. It meets the standards set by the Manufacturers Standardization Society (MSS) SP-58 (Type 59).
Specifications
- Catalog Number: USC020EG
- Features: Consists of two clamps, nut, and bolt. Fits into the open side of strut channel. Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59).
Warning
It is crucial to follow nVent’s product instruction sheets and training
materials when installing and using nVent products. Failure to do so may
result in product malfunction, property damage, bodily injury, and voiding of
your warranty.
Product Usage Instructions
- Step 1: Refer to the product instruction sheets for detailed diagrams and guidance on installation.
- Step 2: Identify the open side of the strut channel where you intend to attach the USC020EG.
- Step 3: Place the two clamps around the strut channel and align them with precision.
- Step 4: Insert the nut and bolt through the clamps and tighten securely.
- Step 5: Verify that the USC020EG is firmly attached to the strut channel before applying any load or equipment.
FAQ
-
Q: Can I use the USC020EG with any type of strut channel?
A: The USC020EG is designed to fit into the open side of a strut channel that conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59). Ensure compatibility before installation. -
Q: What should I do if I encounter difficulties during installation?
A: If you face any challenges during installation, refer to the product instruction sheets for troubleshooting tips or contact nVent customer service for assistance.
FEATURES
- Consists of two clamps, nut and bolt
- Fits into open side of strut channel
- Conforms with Manufacturers Standardization Society (MSS) SP-58 (Type 59)
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Electrogalvanized
- Outer Diameter: 17.9 – 20 mm
- Width: 32 mm
- Thickness: 1.5 mm
- Static Load: 2000 N
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
Contacts
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
-
Netherlands:
+31 800-0200135 -
France:
+33 800 901 793
Europe
-
Germany:
800 1890272 -
Other Countries:
+31 13 5835404
APAC
-
Shanghai:
+ 86 21 2412 1618/19 -
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands: nVent.com
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent