nVent COPC0300CP Single Piece Strut Clamp Owner’s Manual
- August 7, 2024
- nVent
Table of Contents
nVent COPC0300CP Single Piece Strut Clamp
Product Usage Instructions
Installation
- Identify the strut channel where you want to install the clamp.
- Break apart the strut clamp if necessary to fit it into the open side of the strut channel.
- Position the clamp securely in place and ensure it aligns with the thread impression for proper installation.
- Use the captured screw to fasten the clamp tightly onto the strut channel.
Maintenance
- Regularly inspect the strut clamp for any signs of damage or loosening.
- If any issues are found, immediately discontinue use and replace the clamp to prevent any safety hazards.
FAQ
- Q: What is the maximum static load capacity of the strut clamp?
- A: The strut clamp has a static load capacity of 800 lb.
- Q: Where can I find nVent’s product instruction sheets?
- A: Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
OVERVIEW
CATALOG NUMBER
- COPC0300CP
FEATURES
- One piece break apart strut clamp
- Includes thread impression and captured screw
- Fits into open side of strut channel
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Copper Electroplated
- Copper Tube Size: 3″
- Outer Diameter: 3 1/8″
- Width: 1 1/4″
- Thickness: 12 ga
- Static Load: 800 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
Contacts
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands:
- +31 800-0200135
- France:
- +33 800 901 793
Europe
- Germany:
- 800 1890272
- Other Countries:
- +31 13 5835404
APAC
- Shanghai:
- + 86 21 2412 1618/19
- Sydney:
- +61 2 9751 8500
Our Brands
Our powerful portfolio of brands
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>