JYX T10-T Portable Speaker User Manual

JYX T10-T Portable Speaker

Product Keys, Jack Function Introduction

1. : Microphone.
2. : In the USB/TF card state to insert the microphone or open the wireless microphone, short press to record.The screen shows REC, press again to play the recording, long press to delete the recording during playback, the screen will show dEL.
3. : Short press two sound effects, EQ0 (Default outdoor sound effect for power on); EQ1 (indoor sound effect).
4. : Short press to switch between bluetooth,USB,TF card and FM radio, long press to hold to automatically search the station in the FM mode.( long press the M key to enter the TWS connection function in the Bluetooth mode)
5. : Short press to switch the lighting effect. In the FM radio state, just only one light effect.
6. : Rotate left to reduce the volume, rotate right to increase the volume.
7. : Power ON/OFF
8. : Loop:Press to switch between single cycle and all cycle
9. : Short press last song/select last radio station, long press fastback
10. : Short press next song/select next radio station, long press fast forward
11. : Short press to play/pause, long press to search stations automatically when in FM mode. In Bluetooth mode state, long Press play to directly disconnect the Bluetooth connection.
12. : Insert the USB to play music. (The max capacity of USB is 64GB, if more than 64 GB can not be read)
13. : Insert TF card to play music. (The max capacity of TF card is 64GB, if more than 64GB can not be read)
14. : AUX IN Jack
15. : 5V Charging Port
16. : Red light is on when charging, green light is on after full.

Remote Control

Bluetooth Connection Instructions

Boot into Bluetooth mode, open your phone Bluetooth to search speaker name or digital codes for pairing, If need a pairing password, please enter “0000” and click OK to connect.

TWS Connection Instructions

1. Turn on two identical Bluetooth speakers, and both two are in Bluetooth mode, any one of the speaker to set, long press the M key to pair and connect with the other speaker to use TWS function. Long press the M key will disconnect TWS function.
2. The best connection distance for two Bluetooth speakers is about 5 meters.

Charging Instructions

Connect the charging cable to the 5V 2A charger and plug it into the charging port after the machine is turned off; the red light is on when charging, and the green light is on when it is full.

NOTE:

1. The lithium battery of this product is replaceable and can only be replaced with the same battery or equivalent. There is a risk of explosion if the battery is not replaced properly
2. The battery should not be exposed to such as sunlight, fire or similar overheating environment to avoid causing an explosion.

Simple Troubleshooting

1. Q: Automatically shut down when you turn on the speaker
   A: The battery is low, please use after full charge.

2. Q: Automatic shutdown or restart during playback
   A: Battery power is insufficient, please use after full charge.

3. Q: Charging light does not light up, not charging
   A: Check whether the charging cable is well plugged in or damaged; and the charger is well, please use 5V 2A charger to charge the speaker.

4. Q: Bluetooth status no sound
   A: Check whether the Bluetooth is correctly paired, and the volume cannot be the minimum volume when playing.

5. Q: TF card/USB playback no sound
   A: Check whether the TF card is in place, and the USB is inserted in place or has good contact; and the TF card or USS music format is correct (Note: TF card /USS music supports MP3 compressed audio files and WMA lossless audio file playback);and the volume cannot be the minimum volume when playing.

6. Q: REC does not work
   A: Is there space on the TF card or USS, delete part of the file to reserve storage space.
   Recording should be done in TF card /USB mode and with wired microphone inserted or wireless microphone turned on.

7. Q: Recording can not be deleted
   A: Please press and hold the record key or connect to computer to delete while playing the recording file.

8. Q: Recording sound is small or there is noise
   A: Please insert the wired microphone or turn on the wireless microphone when recording.

The Remote Control Diagram And Operating Instructions

1. Normal circumstances the remote control should be used within a reception range of about 6 meters and 30 degrees in front of the reception window of the machine.
2. When operating the remote control, please point the remote control at the receiving window of the machine. There should be no obstacle between the remote control and the machine.
3. If the receiving window of the machine is placed under direct light, the operation panel of the remote control used in this case may not work, in this case, please move the machine away to avoid direct light.
4. When the battery of the remote control is dead, you can replace the AAA battery. Avoid mixing old and new batteries, please check regularly if the remote control battery needs to be replaced.

Product Specifications

Output power …………………………………………………………………………………………….. 2x30W
Frequency effect ………………………………………………………………………………….. 80Hz-12KHz
Input power …………………………………………………………………………………………………. 5V 2A
Signal-to-noise ratio …………………………………………………………………………………….. > 80dB

Packing List

Speaker ………………………………………………………….. …………………………………………… 1 pc
Instructions …………………………………………. …………………………………………………. …… 1 pc
Charging cable … … ………………………………… ………………………………………………………. 1 pc
Remote control ……………………………………………………………………………………………… 1 pc
Microphones ………………………………………………………………………………………………….. 2 pc
AUX cable ……………………………………………………………………………………………………… 1 pc

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>