JYX D16-T Multifunctional BT Speakers User Manual
- June 14, 2024
- JYX
Table of Contents
JYX D16-T Multifunctional BT Speakers
Function Board
- -: Short press to decrease the volume; Long press to play the previous song while playing music. In FM mode, long press to select the previous radio station.
- : Short press the lighting button to turn on the ambient light mode, long press to turn it off.
- : Short press to switch mode among BT, FM, AUX IN,U disk and TF card mode; Long press to activate TWS function;
- [Battery Indicator]
- Short press to switch the sound effects.
- Short press for play/pause. In FM mode, long press for automatic station search. When playing a recorded file, long press to delete the recording. During music playback, long press to quickly enter recorded file playback. In Bluetooth mode, long press to directly disconnect the Bluetooth connection.
- Long press to power on/off; (Long press for 10 seconds to restore factory settings.)
- Function Indicator: The indicator will stop flashing after Bluetooth connected, when playing music, the indicator will start flashing again.
- +: Short press to increase the volume. During music playback, long press to play the next song. In FM mode, long press to select the next radio station.
- [AUX]: Insert an AUX cable to connect an external audio source.
- [USB]: Insert a USB flash drive to play MP3 music. (The maximum available capacity of the USB flash drive is 64GB, and it cannot be read if it exceeds 64GB.)
- [TF]: Insert a TF card to play MP3 music. (The maximum available capacity of the TF card is 64GB, and it cannot be read if it exceeds 64GB.)
- [MIC]: Insert a wired microphone to sing songs.
- [Charging Indicator]: The red light is on when charging, red light will go off and the green light is on when fully charged.
- [DC 5V]: Charging by connecting USB charging cable provided.
Connection Operations
Bluetooth Connection Operation
Turn on the device will enter Bluetooth mode automatically. Then, open the Bluetooth settings on your phone to find device’s Bluetooth name or a numerical code to pair with it. If prompted for a pairing password, enter “0000” and click “OK” to connect.
Bluetooth Internal Recording Operation
- Insert the TF card or USB flash drive and switch to Bluetooth mode.
- After connecting to Bluetooth, play music on your phone.
- Insert the wired microphone or turn on the wireless microphone.
- Short press the recording button to start the Bluetooth internal recording. Short press again to complete the internal recording and start playing the recorded file.
TWS Connection Operation
- Turn on 2 Bluetooth speakers simultaneously, ensure both 2 are in Bluetooth mode. Long press the mode button on one of the speakers until you hear a beep sound, while the other speaker will connect this one automatically, and there will be a prompt sound “ding dong” when the TWS pairing is successful. In TWS connected mode, long press the mode button to disconnect the TWS pairing, there will be a voice prompt when the connection is disconnected.
- While in TWS (True Wireless Stereo) connected mode, search for the Bluetooth speaker name and click on your phone to pair them. Once paired successfully, open the music player on your phone and both Bluetooth speakers will synchronize and play the selected music from your phone.
- While in TWS-connected mode, any operation performed on one Bluetooth speaker will be synchronized on the other speaker. Long press the power button on either Bluetooth speaker to turn it off, and the other Bluetooth speaker will also turn off synchronously.
- In TWS-connected mode, the optimal distance between the 2 Bluetooth speakers is approximately 5 meters.
Charging Instructions
- To protect the battery’s performance, you’d better not use the karaoke machine while charging.
- Warm Tip: The speaker does not have a power bank function, connecting other devices through the USB port is prohibited.
- Please use the 5V 2A charging cable to charge after power off. The red light will be on during charging, and will turn off and the green light will be on when fully charged. consumer a ceramper too smary lemonas me adapter
Warning
1. The lithium battery of this BT can be replaced and only the same or
equivalent battery should be used for replacement. Improper replacement of the
battery may cause a short circuit of the product.
2. The battery should not be exposed to conditions such as sunlight, fire, or
similar overheating environments to avoid explosion.
Attention
- If the battery is replaced improperly, there is a risk of explosion.
- Only the same type or equivalent type of battery should be used for replacement.
FAQ
- Automatic Shutdown after Power ON
- The battery is low, please fully charge before use.
- Automatic Shutdown or Restart During Playback
- The battery is low, please fully charge before use.
- Charging Light is Off or Cannot Charge
- Check if the adapter cord is plugged in properly or whether it damaged; Check if the adapter is working properly, and use a 5V 2A adapter to charge.
- No Sound comes out in Bluetooth Mode
- Check if the Bluetooth pairing is correct; Check if the Bluetooth device is playing; Check if the volume is at the minimum level.
- No Sound While Playing TF Card/U Disk
- Check if the TF card/U disk is inserted correctly and fully; Check if the music format in the TF card/U disk is correct (note: TF card/U disk mainly supports playing MP3 compressed audio files and WMA lossless audio files); Check if the speaker volume is not at the minimum level.
- Recording Function is not Working
- Check if there is space on the TF card/U disk, and delete some files to reserve storage space.
- Recording should be done in TF card mode, U disk mode, and with a wired microphone plugged in or wireless microphone turned on.
- Recording Cannot be Deleted
- Long press the recording button while playing the recording file, or delete it while connected to a computer.
- Low Volume or Have Noise When Recording
- Use a wired microphone or turn on the wireless microphone while recording.
- Automatic shutdown in power-saving mode
- In Bluetooth mode, if the speaker is not connected to any device via Bluetooth within 15 minutes, the speaker will enter power-saving mode and automatically shut down.
- How to use SD mode
- Playing music from an SD card
- Plug your MicroSD card into the MicroSD Slot on the machine’s function board. Music on your SD card will begin playing automatically. (SD card with storage capacity less than 64GB is recommended)
- How to start AUX mode
- Playing music from an AUX-compatible device
- Plug the AUX cable into the AUX Input on the machine’s function board to activate AUX mode.
- Connecting to your device and play music you like.
- How to start USB mode
- Playing music from a USB drive
- Plug your USB into the USB Port on the machine’s function board. Music on your USB will begin playing automatically.
Remote Control
Wireless Microphone Operation Instructions
- Long press to turn on/off.
- When the microphone is not connected to the karaoke machine, the display screen will blink slowly. When the microphone is successfully connected to the machine, the display screen will stop blinking and remain on. When the battery is low, the display screen will blink quickly.
- When the battery of the wireless microphone is low, you can twist the microphone to the left to reveal the battery compartment, where you can replace the size 5 battery. Please pay attention to the positive and negative poles when replacing the battery.
- Squeaking: Do not point the microphone directly towards the speaker of the sound system at close range. You can try moving the microphone farther away or pointing the back of the speaker towards the microphone, or adjusting the microphone volume down on the sound system.
- Low microphone volume/No sound from microphone: Check if the microphone volume is turned up to the maximum.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>