JYX K37 Wireless Lavalier Microphone User Manual
- June 16, 2024
- JYX
Table of Contents
JYX K37 Wireless Lavalier Microphone
Dear Customer,
Thank you for your great support on us! We appreciate every purchase, value your complete satisfaction and strive to offer a high quality product and service. If you have any dissatisfaction with our products, Please don’ t worry, we have your covered.
We offer phone support from 9:00 AM to 6:00 PM, if you have any questions please call: 1-757-943-7037
Product Introduction
Thank you for choosing our products.
This product is an intelligent wireless microphone, which can provide professional recording output. Plug and play, no app required. For multiple purposes: It can be used in live stream, video vlog shooting, program interview, interview recording, video teaching and other occasions.
The wireless lavaliere microphone consists of two parts, the microphone transmitter and the receiver (as shown in the figure below)
-
Microphone Transmitter
-
Microphone Receiver
Outline Picture
- Windbreak
- Microphone Indicator
- Microphone Charging Port/ Monitor Headphone Jack
- Microphone Clip
- Power Switch
- Mobile Phone Plug
- Receiver Indicator
- Receiver Charging Port
Operation Guide
-
Plug the receiver to your device.
-
Press and hold the on key of the microphone to turn it on(the red light and green light flash alternately); If the green light always keeps on, it means the connection is successful.
-
If the red light of the receiver always keeps on, it means they paired successfully. Then open the phone camera, live stream App or other Apps to start recording.
Special Notice: There is no battery in the receiver, so it has no need to be charged during livestreaming. But you can charge your smartphone through the receiver while you are recording and the mobile phone is in low-power status. Just plug the charging cable of your phone into the interface port of the receiver, the mobile phone can be charged through the interface.
Indicator Light Description
Microphone Transmitter
| Function /Status | Operation | Light Status |
|---|---|---|
| Power-on | Press the key for 3 seconds | Red light and green light flash |
alternately
Power-off| Press the key for 3 seconds| The indicator light is off
Power-on but disconnected state| | Red light and green light flash alternately
Power-on and connected state| | Green light is always on
Mute| Click the key| Green light flash
Unmute| Click the key| Green light is always on
Reverb| Double click the key| Green light comes on after flashing red light
Monitoring| Plug in Type C Head| The microphone indicator does not change
Disconnected State| Automatic shutdown after no connection for more than three
minutes| The indicator light is off
Low battery| Under the power on state| The red light comes on every ten
seconds
Charging status| Type C cable charging| The red light is always on; The red
light is off when fully charmed
Receiver
| Function/Status | Operation | Light Status |
|---|---|---|
| Power-on | Power on when inserting the device | Red light flash |
| Power-off | Power off when unplugging the device | The indicator light is off |
| Power-on but disconnected state | Slow flashing of red light | |
| Power-on and connected state | Red light is always on |
Notice: If one of the two microphones keeps flashing and is not connected, you can turn off the microphone successfully connected, unplug the receiver, turn on the microphone that is not connected, press and hold the switch for 8 seconds until it flashes quickly, and then plug in the receiver. The connection is successful.
Packing list
Wireless Microphone Transmitter …………………………………….. 2pcs
Wireless Microphone Receiver …………………………………………. 1pcs
Charging Cable ………………………………………………………………… 1pcs
User Manual ……………………………………………………………………… 1pcs