JYX D17-T Karaoke Machine User Manual
- August 8, 2024
- JYX
Table of Contents
JYX D17-T Karaoke Machine
Product Specifications
Product Name: Karaoke Machine 017-T
Bluetooth Version: Bluetooth 5.0
TF Card: Maximum support up to 32GB
Bluetooth Reception Distance: ~ 10 meters
Speaker Impedance: 40
Speaker Power: SW
Signal-to-Noise Ratio: ~90dB
Total Harmonic Distortion: :S1%
Frequency Response Range: 120Hz-20KHz
External Interfaces: TYPE-C charging interface, AUX interface, TF card
interface
Power input: DC5V=1A
Control Method: Button adjustment
Product and Accessories List :
Speaker | 1 PC |
---|---|
Charging Cable | 2 PCS |
User Manual | 1 PC |
Microphone | 2 PCS |
AUX Cable | PC |
Function diagram
Button Operations
-
Mode Button: Short press to switch between Bluetooth, TF card, and AUX modes (Note: TF card and AUX modes can only be switched when the corresponding devices are connected)_
-
Volume Down: Short press to decrease the volume, long press for previous track.
-
Volume Up: Short press to increase the volume, long press for next track.
-
Power, Play/Pause Button: Long press for 2-3 seconds to power on/off or play/pause.
-
AUX Interface.
-
TF Card Interface.
-
Charging Indicator: The red light stays on during charging, and the blue light stays on when fully charged.
-
TYPE-C Charging Interface.
Microphone Button Operations : -
Power Button: Long press to turn on/off; short press once for reverb adjustment, short press again for microphone adjustment.
-
“+” Button: Short press to increase microphone volume , increase reverb depth.
-
“-“Button: Short press to decrease microphone volume, decrease reverb depth.
-
Microphone Button: Short press to switch between KTV mode, original sound, magical sound, goddess, and baby voice; double click once to enable music elimination (remove vocals), double click again to disable music elimination.
-
Power On – Blue light flashes quickly; Wireless microphone connected successfully – Blue light stays on; Wireless microphone charging – Red light stays on ; Fully charged – Blue light stays on; Low battery – Red light, flashes twice every 5 seconds.
User Instructions
Bluetooth Mode
- Bluetooth Connection: The device is set to Bluetooth mode by default. Turn on the Bluetooth on your phone, search for “D17-T,” and tap on it. When the Bluetooth pairing is successful, you will hear the notification “Bluetooth connected.”
- Music Streaming: Open your phone or other devices and download/play your favorite songs.
- Once the machine is connected to the phone, it has a memory function. It will automatically connect or you can manually connect ii after powering on. If you want to disconnect, you can do so through the Bluetooth settings on your phone.
TF Card
Insert a TF card, and the machine will automatically play from the TF card with a notification sound. When both TF card and Bluetooth are inserted, you can switch between them by short pressing the “MODE” button. AUX
AUX (External Audio Input) Mode
- Insert the AUX cable, and the speaker will automatically play from the external device with a prompt sound.
- When both AUX and TF card are inserted, you can switch between them by short pressing the “MODE” button.
Lights
This product has six types of music lights. By default, it is set to the full- color rotating light effect Double press the MODE button to switch between different light effects. Long press the MODE button to turn on or off the lights.
Wireless Microphone Usage
When both the speakers and microphones are powered on, the 2.4G wireless signal will automatically pair. At this point, you can start using the microphone. Adjust the buttons according to your preference to achieve your desired style.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>