JYX FF-D13 Portable Speaker User Manual
- August 7, 2024
- JYX
Table of Contents
JYX FF-D13 Portable Speaker
Product Information
Specifications
- Model: FF-D13 PORTABLE SPEAKER
- Power: 5V 1A
- Inputs: TF Card, USB, MIC, AUX
Product Usage Instructions
Machine Setup
Attaching the Machine: Take the main unit from the package and use the
shoulder strap buckle to fasten the hooks on both sides of the machine. Use
the shoulder strap to tie the machine around your waist or hang it on your
shoulder, adjusting as needed for comfort.
MUSIC Playback Setup
- Bluetooth Mode: Click Mode button until Bluetooth mode is displayed. Search for machine name JYX in device’s Bluetooth settings and connect.
- SD Mode: Insert MicroSD card into MicroSD Slot for automatic playback (16GB or less recommended).
- AUX Mode: Plug AUX cable into AUX Input for device connection.
- USB Mode: Insert USB drive into USB Port for automatic playback.
Frequently Asked Questions (FAQ)
-
Q: How do I change playback modes?
A: Use the Mode button on the function board to switch between Bluetooth, AUX, SD, and USB modes. -
Q: How do I mute audio?
A: Press the Mute button on the remote control to mute audio playback -
Q: What is the recommended storage capacity for SD cards?
A: It is recommended to use an SD card with a storage capacity of less than 16GB for optimal performance.
Function Board
- Master Volume
- LED Lights ON/OFF
- Mode
- Recording
- Mic Echo
- PREV
- PLAY/PAUSE
- NEXT
- Mic Volume
- USB Port
- MicroSD slot
- Power ON/OFF
- Mic Input
- DC 5V-1A Charging Cable Input
- AUX Input
Remote Control
Note:
- Take the main unit from the package and use the shoulder strap buckle to fasten the hooks on both sides of the machine. Use the shoulder strap to tie the machine around your waist or hang it on your shoulder, you can adjust the shoulder strap to make the machine in the right position.
Please adjust the volume to the appropriate sound effect to avoid damaging the hearing or accelerate the aging of components.
MACHINE
How to turn on/off the machine
Press the Power switch on the machine’s function board labeled ON/OFF to turn
on the machine.
To turn off the machine, press the Power switch to its original position.
How to charge the machine
Connect the charger plug into the machine’s DC5V/A Charging Cable Input and to
a polarized outlet. Be sure to charge fully before each use. The indicator
light will turn on red to indicate charging.
MICROPHONE
How to turn the microphones on
Install two AA batteries to the wireless microphone. Connect the wired
microphone plug into the machine’s Mic Input. Turn on the microphones using
the Power button on each handle.
They will automatically connect to the machine.
How to adjust the microphone volume
To adjust the volume of your singing over the music, click the Volume +/-
buttons up or down as desired.
MUSIC
How to set up playback
Your machine has 4 different playback options: Bluetooth, SD, AUX and USB.
Each has its own hook up location and set-up method (see the subsections
below).
How to connect to Bluetooth
Playing music from your device Click the Mode button on the machine’s function board until the digital display indicates you are in Bluetooth mode. Then, search for the machine name “JYX” under your device’s Bluetooth connection settings and click to connect.
How to use SD mode
-
Playing music from an SD card
Plug your MicroSD card into the MicroSD Slot on the machine’s function board. The stored music on your SD card will begin playing automatically. (SD card with storage capacity less than 16GB is recommended) -
How to start AUX mode
Playing music from an AUX-compatible device
Plug the AUX cable into the AUX Input on the machine’s function board to activate AUX mode. Plug the other end of the cable into the designated input on your device and play your music just as you normally would. -
How to start USB mode
Playing music from a USB drive
Plug your USB into the USB Port on the machine’s function board. The stored music on your USB will begin playing automatically. -
How to record
Begin by inserting a suitable recording device into the function board via the MicroSD slot or USB port. Ensure that the microphone is turned on and then proceed to press REC on the function board. Speak or sing into the microphone and when finished recording, click REC again to stop it.
To listen to the recorded audio, remove and then reinsert the USB or MicroSD recording device. The recording will begin playing automatically. -
How to use multiple playback modes
To use playback modes interchangeably, simply activate each mode according to the instructions above, then click Mode to switch between the inputs.
EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales,
CF15 7QR contact@evatmaster.com
eVatmaster Consulting GmbH Bettinastr. 30 60325 Frankfurt am Main, Germany
contact@evatmaster.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>