JYX S1Karaoke/Live Audio Card Al-in-one Speaker Instruction Manual

August 7, 2024
JYX

JYX S1Karaoke/Live Audio Card Al-in-one Speaker

Control Panel Introduction

  1. Power Button/Lights
    Long press for 3 seconds to power on/off. The light is white when the speaker is turned on, and the light is red when charging;Short press to switch between different lighting effects.

  2. INPUT MODE
    Short press to switch two input modes:accompaniment mode and Bluetooth mode.

  3. Sound ON/OFF
    Short press to turn on or off the speaker’s external sound function.

  4. EQ Mode/Wireless Mic
    Short press to switch between singing mode and listening mode.Long press to turn on or off the wireless microphone function. Microphone is automatically enabled by default at power-on.

  5. Treble
    Turn left to reduce the treble, turn right to strengthen the treble.

  6. Mid
    Turn left to reduce the midrange, turn right to strengthen the midrange.

  7. Bass
    Turn left to reduce the bass, turn right to strengthen the bass.

  8. Mic
    You can adjust the microphone volume by rotating left or right.

  9. Reverb
    You can adjust the reverb volume by rotating left or right.

  10. Monitor
    You can adjust the speaker/monitor volume by rotating left or right.

  11. Primal sound
    Scene mode, the indicator light indicates that it has been switched to this mode.

  12. PRO
    Scene mode, the indicator light indicates that it has been switched to this mode.

  13. MC
    Scene mode, the indicator light indicates that it has been switched to this mode.

  14. KTV
    Scene mode, the indicator light indicates that it has been switched to this mode.

  15. Voice Change
    Short press to switch between four different voice modulation modes.

  16. Accompaniment
    When open, it’s in accompaniment mode, and when closed, it’s in original vocals mode. (requires a stereo source)

  17. Ducking
    When turned on, the vocals will be highlighted, and the sound of the music will become smaller. When turned off, the music and the vocals are balanced.

  18. Internal play
    When turned on, the sound played by the computer can be recorded back to the computer. When the computers turned off, the sound played by the computer can only be monitored and cannot be recorded back to the computer.

  19. Denoise
    When the noise reduction function is turned on, the external noise is more obvious in the earphone, and there is no external noise when it is turned off.

  20. Special effect sound
    Contains 6 special effects sounds, short press to play different sound effects.

Interface Introduction

  1. Charging
    This interface can be connected to 5V3A charging head for charging.

  2. 0TG/PC Live
    For live computer broadcast.It can also be connected to the phone’s OTG port.

  3. Earphones
    Earphones connected to 3.5mm plugs.

  4. Microphone
    Connect a microphone with a 3.5mm plug.

  5. Live
    Connect to mobile phone live broadcast, recording, singing.

  6. Accompaniment
    The accompaniment line is connected to the 3.5mm plug.

Connection diagram

Picture A. Schematic diagram of jack connection

Picture B. Live connection diagram

Picture C. Schematic Diagram of Family KTV Connection

Picture D. Computer accompaniment and computer live debugging diagram

After the sound cards are connected to the computer and the computer has recognized the sound card

  1. Connect the computer to the other device using a TYPE-C cable, then click on the small speaker icon in the lower right corner of the computer. Right-click and open ‘Playback Devices.’ If the speaker displays ‘S1’ and is set as the default device, it means the sound card speaker driver has been successfully installed and recognized by the computer;
  2. Computers or other devices that support OTG function and standard USB protocol all support connection with sound card;

Picture E. Bluetooth connection diagram

  1. Turn on the Bluetooth of the mobile phone, as shown in Figure (1);
  2. The phone will automatically detect the available equipment around, as shown in Figure (2);
  3. After the Bluetooth device “S1″ is detected, click to start pairing, and it will be successful in about 10 seconds. The monitor earphone on the sound card will prompt”Bluetooth is connected”, as shown in Figure(3), then you can select music Send to the sound card via Bluetooth as accompaniment music.

Picture F. Charging connection diagram

Common Problems and Solutions

Documents / Resources

| JYX S1Karaoke/Live Audio Card Al-in-one Speaker [pdf] Instruction Manual
S1, S1Karaoke Live Audio Card Al-in-one Speaker, S1 Speaker, Karaoke Live Speaker, Audio Card Speaker, Al-in-one Speaker, Speaker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals