NINJA CREAMi Deluxe Ice Cream and Frozen Drink Machine User Guide

CREAMi Deluxe Ice Cream and Frozen Drink Machine

“`html

Specifications:

• Product Name: CREAMi Deluxe

• Features: Creamerizer Paddle, Deluxe Tubs and Lids, BPA-free
  materials

• Assembly: Plug-in unit, install Creami Deluxe Tub, Creamerizer
  Paddle, and lid

• Processing Modes: TOP, FULL, BOTTOM; MIX-IN program

• Cleaning: Top-rack dishwasher safe, hand-washable

Product Usage Instructions:

Assembly & Processing:

1. Plug in the unit before proceeding with assembly.

2. Install the Creami Deluxe Tub in the outer bowl.

3. Insert the Creamerizer Paddle into the lid of the outer
   bowl.

4. Secure the lid on the outer bowl.

5. Select processing mode and program.

6. After processing is complete, remove the bowl from the
   base.

Optional Processing:

If needed, remove the lid and create a hole in the processed
ingredients for mix-ins. Use RE-SPIN for very cold bases or crumbly
outputs. Do not use RE-SPIN before using the MIX-IN program.

Disassembly & Cleaning:

1. Lift the Deluxe Tub out of the outer bowl.

2. Rinse the outer bowl lid and remove any residue from the
   Creamerizer Paddle.

3. Remove the paddle by pressing the latch on top of the lid.

4. All parts are dishwasher safe or can be hand-washed.

Start Here! Prep Your Deluxe Raspberry & Orange Slushi

Recipe*

Raspberry & Orange Slushi

*Or, turn the page over to prep your personalized ice cream
recipe.

PREP: 5 minutes | FREEZE: 24
hours | PROGRAM TIME: 5 minutes |
MAKES: 3 servings

FAQ:

Q: What should I do if the control panel does not

illuminate?

A: Ensure that the unit is properly assembled. Refer to the
troubleshooting section in the safety instructions if needed.

“`

Please make sure to read the enclosed safety instructions prior to using your unit.
DELUXE Quick start guide & get started recipes
Outer bowl lid locks Creamerizer Paddle in place.
Deluxe Creamerizer Paddle Dual functioning paddle finely shaves and mixes frozen ingredients
into the creamiest treats.
CREAMi Deluxe Tubs & Lids
BPA-free Deluxe Tubs and lids for making and storing CREAMi treats.
Outer bowl securely holds container in
place during processing. NOTE: Unit colour, number of Deluxe Lids and programs may vary by model.
SCAN & WATCH HOW IT WORKS www.ninjakitchen.co.uk

Assembly & Processing

1. Plug in unit first
Unit will not run if outer bowl is installed before unit is plugged in.

2. Install Creami Deluxe Tub
Remove lid from tub and check that ingredients have not been frozen at an angle. Place tub with frozen base in
outer bowl.

3. Install Creamerizer Paddle
Press and hold paddle latch on top of outer bowl lid, then
insert paddle in bottom of lid. Release latch to secure paddle.

4. Install lid
Position tab of lid just slightly to right of outer
bowl handle so lines on lid and handle align.
Rotate lid clockwise to lock.

If control panel will not illuminate, ensure unit is properly assembled. See troubleshooting section of the safety instructions if install light is illuminated.

NOTE

NOTE

Bowl Release
Button To remove outer bowl, hold release button.

Install outer bowl

Select processing

Remove bowl

After plugging in unit, place outer

mode & program

When program is complete, hold

bowl on base with handle centred Press Power. Press a processing release button on left of motor

on unit. Twist handle to the right to mode (TOP, FULL, or BOTTOM), base and twist bowl handle

raise platform and lock bowl in place then turn dial to select a program

clockwise, then pull away

(signalled by a click).

and press dial to begin processing.

from unit to remove.

To process the whole tub, press FULL. To process just the top half, press TOP. To process the remaining half of the tub, press BOTTOM. TOP and BOTTOM processing zones are only available with SCOOPABLE programs.

OPTIONAL PROCESSING

OR

8. Remove lid
Press the lid unlock button and twist to remove lid.

Use a spoon to create a 4cm wide hole that reaches

9. If not adding mix-ins, RE-SPIN
can be used on a crumbly or

the bottom of the processed

powdery output to make it

ingredients.

creamy. RE-SPIN is often

Add chopped or broken

needed for very cold bases.

mix-ins to the hole. Select

Do not RE-SPIN before

the same processing mode,

using MIX-IN program.

then select MIX-IN.

Select the mode prior

to selecting RE-SPIN.

NOTE TIP

Disassembly & Cleaning
Remove Deluxe Tub & paddle
Lift tub out of outer bowl. Rinse outer bowl lid to remove any sticky residue
or pieces wedged in the paddle. Remove paddle by pressing paddle latch on top of lid. All parts are top-rack dishwasher safe and can also be hand-washed.
Start Here! Prep Your Deluxe Raspberry & Orange Slushi Recipe*

Raspberry & Orange Slushi

*Or, turn the page over to prep your personalised ice cream recipe.

PREP: 5 minutes | FREEZE: 24 hours | PROGRAM TIME: 5 minutes | MAKES: 3 servings

INGREDIENTS
For Freezing 60g granulated sugar 250g fresh raspberries 230ml hot orange juice
DIRECTIONS
For Freezing

For Processing Pour-in: water, alcohol, or juice
For Processing

FREEZE for 24 hours

Place the sugar and raspberries into an empty CREAMi Deluxe Tub. Combine mixture with a fork until paste like.
Add hot orange juice to the DRINKABLE FREEZE FILL line and stir until sugar has dissolved.

Once cooled, place storage lid on tub and freeze for 24 hours.

If your pour-in contains alcohol, select FROZEN DRINK.

PROCESSING MODE

SLUSHI

10 minutes before processing remove tub from freezer and remove lid from tub.
Add pour-in to the DRINKABLE POUR-IN FILL line. Please use the Quick Start Guide for assembly and processing information.

Press FULL, then use the dial to select SLUSHI and press dial to begin processing. Add 4 additional tablespoons of your desired pour-in, then select RE-SPIN.
Once processing is complete, transfer slushi to a glass and serve immediately.

PREFER MORE SIPPABLE? If you prefer a thinner frozen drink after processing, simply add 2­4 additional tablespoons of your desired pour-in, then select RE- SPIN.

Perfectly Personalised Ice Cream
PREP: 5­10 minutes | FREEZE: 24 hours | PROGRAM TIME: 2 minutes | MAKES: 6 servings

INGREDIENTS
27g cream cheese, softened 80g caster sugar Flavouring, 1 ½ teaspoons extract of your choice OR 3 tablespoons of cocoa powder
PICK YOUR FLAVOUR

225ml double cream 345ml whole milk 45g mix-ins of your choice (optional)

Vanilla extract

Mint extract

Almond extract

Fruit extract

Cocoa powder

MAKE IT DAIRY-FREE Use vegan cream cheese for cream cheese, unsweetened coconut cream for double cream and unsweetened oat milk for milk. Whisk the coconut cream until smooth, then add the remaining ingredients.

Microwave cream cheese for 10 seconds.
Add sugar and flavour, then whisk the mixture until it looks like frosting.

Slowly mix in the double cream and milk until fully combined and sugar is dissolved.

Pour base into CREAMi Deluxe Tub. Place storage lid on Deluxe Tub and
freeze for 24 hours.

Remove tub from freezer and remove lid from tub.
Refer to previous page for Assembly & Processing instructions. Select processing mode (FULL, TOP, or BOTTOM), then select ICE CREAM.

PICK YOUR MIX-INS TO ADD A PERSONAL TOUCH
Prepare 45g of mix-ins, which can include your favourite crushed sweets, frozen fruits, chopped nuts, chocolate pieces, and more.
With a spoon, create a 4cm wide hole that reaches the bottom of the processed ingredients.
Add mix-ins to the hole. Select the mode previously processed, then select the MIX-IN program.

Make two flavors from one base. See page 7 of Inspiration Guide to get started.

NOTE

REGISTER ONLINE! Register your product at ninjakitchen.co.uk
Or CALL US FREE ON: 0800 862 0453

OR

Scan the code for online help, FAQs, and How-To Videos. ninjakitchen.co.uk

©2023 SharkNinja Operating LLC. All rights reserved. Made in China. NINJA is a registered trademark in the United Kingdom of SharkNinja Operating LLC.
NC 501 U K QSG M P 23 1 012 Mv1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>