GCteq GF-13Qi2 Wireless Charger User Manual

Qi2 Wireless Charger
User Manual

Product Introduction

Perspective View Dimensions

Installation

1. Open a 980mm through-hole (as shown below); the recommended panel thickness is 16-30mm.
2. Pass the power cord through the mounting hole, align the product with the mounting hole, and embed the product vertically into the mounting hole so that the surrounding sides of the product completely fit the furniture surface.

Specification

Over-voltage protection,
Over-current protection, FOD
Certifications| CE I FCC / Rosh /Q12

Precautions

Please read and follow the following precautions carefully before installing and using this product:

1. Power Supply: Use an adapter that meets safety standards to power the device.
2. Foreign Metal Objecte: Ensure there are no foreign metal objects between the wireless charger and the mobile phone while charging to prevent accidental heating of the metal objects.
3. Magnetic Cards: Do not place magnetic cards, such as bank of bus cards, in the charging area to avoid damage.
4. Charging Distance: To obtain a better wireless charging experience, use only within the product’s maximum charging distance.
5. Compatibility: Thia product is designed for iPhones with magnetic wireless charging functions and is compatible only with iPhone 12 and newer models. Foroptimal Qi2 15W charging, the device must be an iPhone 12 or later, running iOS 17 or newer.

Performance Characteristics

1. Q12.0 MPP Stendard: Supports Phone’s latest Qi2.0 MPP megnetic charging standard and has obtained WPC Qi2 official certification.
2. Wireleee Charging: Supports up to 15W wireless charging.
3. Magnetic Design: It features a ring-shaped magnetic design to ensure the phone is tightly adsorbed and aligns the charging coil easily.
4. Easy Installation: The unique metal buckle design for easy fixing, and the embedded design allows it to integrate seamiessly with furniture.

Common product faults

requirements_
2.Ensure secure connection of power port.
Wireless charging slow| 1. Product body temperature too high,
2. Misaligned wireless charging area.| 1.Let the product cool to room ternperatu re.
2.Place the phone In the center of th eaherg ing area for better
alignment.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Hazardous Substance Declaration
This mark Is the product pollution control mark, the number of which represents the environ mental service life. In this perlod of time, under normal conditions of use harmful substances will not cause greater pollution to the environment or damage to human life and property.

Product Warranty Instructions

Wireless charger productafter-sales service strictly in accordance with Law ofthe PRC on the Protection of the Rights and Interests of Consumers, and Product Quality Law of the People’s Republic of China Adopted to provide After-sales service.
The services are as follows:
1. Within 7 days from the next day after purchase (sign for), if this product has performance failure, you can enjoy free return or exchange sarvice after being tested and determined by the after-sales service center;
2.Within 15 days from the next day efter you purchase (sign for), if this product has performance fallure, you can enjoy free exchange or repair service after being tested and determined by the after-sales service center; 3.Within 1 year from the next day after you purchase (sign for), if this product has performance fallure, you can enjoy free repair service after being tested and determined by the after-sales service center.
Non warranty regulations
In one of the following cases, we don’t offer three guarantees and only charging maintenance will be provided:
1.Damage caueed by improper use, maintenance and storage of consumers;
2.Damage caused by unauthorized service provider;
3.There is no valid invoice or proof of purchese;
4.Damage caused by majeure.

Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd.
Website: http://www.gcteq.com
Checked Certificated of qualification

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>