GCteq GF-04 PRO Embedded Intelligent Multi-Functional Charger User Manual

GCteq GF-04 PRO Embedded Intelligent Multi-Functional Charger User Manual

Precautions

Please read and observe the following precautions carefully before installing and using this product:

1. Please supply power to the wireless charger using the original power adapter for this product.
2. The wireless charging distance of this product is 3-8mm (coil-coil)
3. Please ensure that there are no metal foreign bodies between the wireless charger and the mobile phone before charging, so as to prevent the metal foreign bodies from being heated by mistake.
4. Do not place magnetic cards such as bank cards and bus cards in the charging area to avoid damage to the cards.
5. For a better wireless charging experience, please do not use the product beyond the maximum charging distance.
6. The heating and cooling functions can only be used after the charging module is screwed out.
7. If the charging module is manually toggled or not rotated properly, heating and cooling functions may not be available.
8. Please reserve space for cooling product.

Performance Features

1. With unique installation process, it can realize convenient and quick installation.
2. It consists of three core functions including wireless charging、 wired charging and heating \cooling , which can meet different scenarios.
3. With intelligent power distribution, it can meet different application combinations.
4. It is compatible with wireless fast charging protocols of mainstream devices such as Apple 7.5W and Samsung 10W.
5. It provides A 18W and C65W (maximum) wired charging interface

Instructions:

1. Make sure that your phone supports wireless charging, because the wireless charging requires the support of the wireless induction coil built into the phone(hardwa re);
2. Whe n you power onl the wireless charger, please make sure there is no magnetic object (metal, magnet, etc.) in the chargingarea, then switch on the power, and place the mobile phone in the chargingarea;
3. The wireless coil of different phones is located in different locations. The sensor area is generally located in the center of the phone. You need to make sure that the wireless coil of the phone is aligned with the center of the wireless chargingarea. When chargingsta rts, the screen will light up toshow the charging prompt;
4. You need to pay attention to the limitation of chargingdistance for wireless charging. The distance between the phone and the wireless charger should not exceed the maximum chargingdistance of the product.

Common product faults

Cannot start charging

| 1.The power Csuappulysdeoes not meet

2re.Uqnusirteambleenctosn. nection of power 3in.Ttehrefacchea.rging distance is out of 4ra.Tnhger.e are other metal objects in

the charging area.

| 21..Reipnlsaecrettthheeapdoawpetresr othcaktemt. atch. 43..Ruseimngovweitmhientathl feosrpeiegcnifibeodddieisstance.
Charging  is slow| tTohoehteigmhperature of product is| d1、isKseipepatrieoansonable space for heat

d2、rPoplesatsoerwoaoimt utnetmilpthereatteumrepbeerafoturere using the device

Heating and cooling components         do not work

Hazardous S

| s1c. rTehweecdhoarugti;ng module is not fully 32.. Product tpeomwpeer rias tiunrseuiffis ctoieonht;igh;

4. The touch button fails.

ubstance Declar

| m1. oPdleualseeheanssbuerenthcaotmthpelecthelayrging 2u.nCsocrnefiwrmedw; hether to use the 3st.aRnedsaerdveasduaffiptceier:nt space for heat

adfitsesripthateiopnro, adnudctstteamrt puesrinagtutrheeddreovpisc;es

4. Report device fault for repair.

a t io n

Hazardous Substance Declaration

This mark is the product pollution control mark, the number of which represents the environmental service life. In this period of time, under
normal conditions of use harmful substances will not cause greater pollution to the environment or damage to human life and property.

(Cr(VI))

| Pol-yBbiprohmeninyalsted

(PBB)

| Pdoiplyhbernoyml einthaetersd

(PBDE)

Electronic components|  |  |  |  |  |
Plastic casing|  |  |  |  |  |
Ealleloctyrpoaprltasted aluminum|  |  |  |  |  |
Non-electroplated metal parts|  |  |  |  |  |
Double faced adhesive tape|  |  |  |  |  |
Synthetic cork|  |  |  |  |  |
Silicon parts|  |  |  |  |  |
OThIits mforamnisstihnattetrhmeocfoSnttiepnutlaotfitohneShJa/rTm1f1u3l6s4ubstance in a part of the part is lower than the limit XreqItumireamnesntthsastptehceicfioendtiennGt Bo/f Tth2e6h57a2rm.  ful substance in a part of the part exceeds the limit

requirements specified in GB/T 26572.

Product Warranty

The warranty services of repair, exchange and return are provided for wireless charger products in strict accordance with the provisions of Consumer Rights Protection Law of the People’ s Republic of China and Product Quality Law of the People’ s Republic of China. The service contents are as follows: 1. If any performance fault occurs in the product within 7 days from the day following the purchase (signature for receipt), you can enjoy the return or exchange services free of charge after testing and confirmation by the after- sales service center; 2. If any performance fault occurs in the product within 8-15 days from the day following the purchase (signature for receipt), you can enjoy exchange or repair services free of charge after testing and confirmation by the after-sales service center; 3. If any performance fault occurs in the product within 1 year from the day following the purchase (signature for receipt), you can enjoy repair services free of charge after testing and confirmation by the after-sales service center; Non-warranty Provisions The warranty services of repair, exchange and return are not provided in one of the following cases, and only repair is provided for a fee;

1. Damage is caused by consumers due to improper use, repair and storage; 2. Damage is caused due to the repairs not performed by authorized service providers designated by the Company; 3. No valid warranty services or invoices or proof of purchase can be provided; 4. Damage is caused due to force majeure.
   Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd Website: http://www.gcteq.com

Instruction

Fixation for Installation

1. The maximum outer diameter of product is 100.5mm, and the bottom depth is 97.8mm. The suggested size of hole on the surface of furniture ranges from 101mm
   to 101.5mm, and a reasonable gap is reserved at the bottom to facilitate the heat dissipation of product, as shown in the figure below:

2. Put the product into the drilled round hole, and tighten the fixing ring at the bottom, as shown in the figure below:

Operation Instructions

Definition of movement module buttons and indicator lights

 |
---|---
Button form

State

Button action

| Initial state

Click           Double-click

| Touch button

Raising state

Click            Double-click

| sStcarteew-out

Double-click

 |  | Raise an   rotate|  | Rotate| Ro ate
Movement Indicator| Raise Blue| rightwards

Green

| Descend Blue| rightwards Green| leftwards Green
 |  |  |  |  |

Definition of buttons and indicator lights of heating and cooling modules

 |
---|---
Button  form/action

Icon

| Constant| Touch| button/click|
Mode

Indicator

| temperature

Red

| Tea warming

Orange

| Cooling

Blue

| Milk warming

Yellow

 | | | |

Note:

The heating and cooling functions can only be enabled after the product is screwed out, please make sure that the product has been fully screwed out and entered the
following state. If the product is manually toggled or not rotated properly, the heating and cooling functions may not be available;

Operation instructions for heating and cooling:

Put the liquid into the heating and cooling cup, put the cup into the cup holder, and then select the corresponding function.
The heating and cooling functions will be automatically turned off after three hours of operation.

Specifications

Input

Wireless                   Output

| DC 24V 72W
charger|  | 15W Max,compatible with 10W/7.5W/5W
Transmission  distance| 3-8mm(coil-coil)
Output of Type-C| Q65CW4.M0(a5xVS~u20p)p，oFrCtPs，PADF3C.，0A，PppPlSe(32..64VA~p2r0oVt)o，cols
Output of USB-A| S18CWP,FMCaPx,AsFuCp，pAoprptsleQ2C.4.A0，pQroCt3o.c0o, ls
Haenadting fcuonoclitniogn| Power| 33W
Cup capacity| 350ML
mCoondsetant temperature| 50℃-55℃
Cooling mode| 2℃-12℃
Tea warming mode| 30℃-35℃
Milk warming mode| 40℃-45℃
Protection| Overcurrent,overvoltage,short      circuit,FOD
Dimensions| Φ115mm×101.5mm

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>