GCteq GF-17 Series Embedded 3 in 1 Wireless Charging Board for Apple User Manual

July 31, 2024
GCteq

GCteq GF-17 Series Embedded 3-in-1 Wireless Charging Board for Apple

Product Introduction

Installation

  1. The size of the opening on the furniture surface should be 252 x 122.5mm. Leave a reasonable amount of space at the bottom to facilitate heat dissipation of the product as shown below.
  2. Place the product into the opened square hole, press it tightly, and fix it with screws, as shown below:

Specification

Precautions
Please read and follow the following precautions carefully before installing and using this product:

  1. Use a safety-standard adapter to power the device.
  2. The wireless charging distance is 3-8mm.
  3. Ensure no metal objects between the charger and the phone during charging.
  4. Do not place magnetic cards in the charging area.
  5. Do not exceed the maximum charging distance for the best experience.

Feature

  1. Easy and fast installation process.
  2. Three-in-one charging for iPhone, iWatch, and Airpods.
  3. Wood grain water transfer process for stylish application.
  4. Supports QI wireless charging and fast charging protocols.
  5. Provides Max. 18W A port and Max. 30W C port wired charging interfaces.
  6. Intelligent power distribution for different applications.

Common product faults

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Expo
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Hazardous Substance Declaration
This mark is the product pollution control mark, the number of which represents the environmental service life. In this period, under normal conditions, harmful substances will not cause greater pollution to the environment or damage to human life and property.

Product Warranty Instructions
Wireless charger product after-sales service is strictly by the Law of the PRC on the Protection of the Rights and Interests of Consumers, and the Product Quality Law of the People’s Republic of China Adopted to provide After-sales service.

The services are as follows

  1. Within 7 days from the next day after purchase (sign for), if this product has performance failure, you can enjoy free return or exchange service after being tested and determined by the after-sales service center;
  2. Within 15 days from the next day after your purchase (sign for), if this product has performance failure, you can enjoy free exchange or repair service after being tested and determined by the after-sales service center;
  3. Within 1 year from the next day after you purchase (sign for), if this product has performance failure, you can enjoy free repair service after being tested and determined by the after-sales service center.

Nonwarranty regulations

In one of the following cases, we don’t offer three guarantees and only charging maintenance will be provided:

  1. Damage caused by improper use, maintenance, and storage of consumers;
  2. Damage caused by unauthorized service provider;
  3. There is no valid invoice or proof of purchase;
  4. Damage caused by majeure.

Manufacturer: GCteq Wireless (Shenzhen) Co., Ltd.
Website: http://www.gcteq.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals