GCteq GF03WLITE12V Embedded Smart Wireless Charger User Guide

GCteq GF03WLITE12V Embedded Smart Wireless Charger

Packing list

Installation

1. Cutting out a 90mm grommet hole in the work surface with a hole saw drill.
2. Connect the device with an adapter and plug it into the power socket.
3. Fit into the grommet hole in the work surface and lock It up.
4. Place your device directly on the wireless receiver(focus on the charging area).
5. The device will be charged automatically.

Product failure table

Performance features

1. This product has with wireless charging function, supports QI EPP 15W max, and is compatible with all mobile phones with QI wireless charging
2. This product supports multiple protection functions such as intelligent foreign object detection, over-current, over-voltage, over-temperature, short circuit, etc., making it safer to use.

Precautions
Please read and follow the following precautions carefully before installing and using this product：

1. Warning: Do not place metal products on the product to avoid heating.
2. Warning: Do not place magnetic cards such as bank cards and bus cards on the product to avoid damaging the cards.
3. Please select an appropriate adapter within the specified input voltage range.
4. When using the wireless charging function of this product, do not use a mobile phone case thicker than 3mm.

Specifications

Hazardous substances
This mark is a product pollution control mark. The number indicates the product’s environmental service cause major pollution to the environment nor causes damage to people or property under normal use conditions.

This form is prepared by the regulations of SJ/T 11364
Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirements specific in GB/T26572. Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirements specific in GB/T26572.

Warranty instructions
The after-sales service of this product is strictly by the “Consumer Rights Protection Law of the People’s Republic of China” “and the “Product Quality Law of the People’s Republic of China” implements three-guarantee after-sales service and the service content is as follows:

1. Within 7 days from the day after your purchase (sign for receipt), if there is a performance failure of this product, as detected and determined by the after-sales service centre, you can enjoy free return or exchange service.
2. Within 8-15 days from the day after you purchase it (sign for receipt), if there is a performance failure of this product, as detected and determined by the after-sales service centre, you can enjoy free exchange or repair service.
3. Within 1 year from the day after you purchase it (sign for receipt), if there is a performance failure of this product, as detected and determined by the after-sales service centre, you can enjoy free repair service.
4. Friendly reminder: Since packaging boxes are required to ensure the safety of product transportation during transportation is recommended that you keep the packaging boxes for at least 15 days from the day after signing for the goods.

Non-warranty regulations
If one of the following conditions applies, the three-guarantee will not be implemented and only paid maintenance will be provided.

1. Damage caused by improper use, maintenance and storage by consumers;
2. Damage caused by repairs performed by non-authorized service providers designated by the company;
3. No valid three-guarantee, valid invoice or valid purchase voucher；
4. Damage caused by force majeure
5. ManufactureGCteq Wireless (Shenzhen) Co., Ltd https://www.gcteq.com

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure Considerations
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>