SILENT ANGEL Z1 PLUS Treatment Twittering Machines User Guide

SILENT ANGEL Z1 PLUS Treatment Twittering Machines

Specifications

• Dual firmware design to prevent firmware damage during upgrade
• Dual network port design for simultaneous network and player connection
• USB Audio Optimizer for optimized USB audio processing
• Event-triggered system architecture to minimize system load
• BNC external clock interface for external clock equipment compatibility

Product Usage Instructions

Front Panel

Power Indicator: Blue light indicates power on, no indicator when off.

Rear Panel

• Power Button: Press to turn on/off. Long press to turn off when already on.
• Network Port: Supports 1000Mbps and 100Mbps Ethernet Network.
• Player Port: Supports 1000Mbps and 100Mbps Ethernet Network.
• Capacity Expansion Ports: USB3.1 (USB 2.0 compatible).
• Clock Input: 25MHz clock Input port (BNC interface).
• Clock Selector: Slide switch for internal/external clock selection.
• DC Input: 5.5mm x 2.5mm DC 12V power input.

Preparation Work

Audio Device Setup:

1. Power off all audio devices.
2. Connect Z1 PLUS Network port to router LAN port with Ethernet cable.
3. Connect USB AUDIO port to USB DAC with USB cable.

Power Connection:

1. Connect the power adaptor to the circular power inlet in the rear panel.
2. Connect power adaptor to AC outlet with power cord.

Power On

Power on Z1 PLUS by pushing the power button at the rear panel. The power LED will light on.

Advanced Connection Diagram

(Include advanced connection diagram here if needed)

FAQ

• Q: What should I do if the power indicator does not light up when turning on the device?
  • A: Check the power source connection and ensure the power button is pressed correctly.
• Q: How can I switch between internal and external clock sources?
  • A: Slide the Clock Selector switch to the desired position when the device is turned off and then power cycle the device.
• Q: Can I use the Maintenance Port for regular device maintenance?
  • A: No, the Maintenance Port is only for engineers to maintain equipment. Users should not use this port.

Product Features

• Dual firmware design prevents the firmware from being damaged during upgrade.
• The dual network port design can connect the network and player at the same time.
• USB Audio Optimizer is an optimized USB audio processor.
• Event-triggered system architecture minimizes system load.
• BNC external clock interface is applicable to external clock equipment

Package Contents

Front Panel

1 Power Indicator

• When the power is on, the blue light comes on
• When the power is off, there is no indicator

Rear Panel

• 2 Power Button
  • When the power is off, press the button to turn on the power
  • When the power is on, long press the button to turn off the power
• ③ Network Port
  • Supports 1000Mbps Ethernet Network and 100Mbps Ethernet Network
• ④ Player Port
  • Supports 1000Mbps Ethernet Network and 100Mbps Ethernet Network
• ⑤ Capacity Expansion Port
  • USB3.1 (USB 2.0 compatible)
• ⑥ Capacity Expansion Port
  • USB3.1 (USB 2.0 compatible)
• ⑦ Clock Input
  • 25MHz clock Input port (BNC interface, 50 / 75 ohm impedance auto-detection)
• ⑧ Clock Selector(Slide the switch when the device is turned off )
  • To use an external clock slides to the side of the Clock Input and power cycle
  • To use the internal clock, slides to the side of the Internal Clock and power cycle
• ⑨ DC Input
  • 5.5mm x 2.5mm DC 12V power input ( can be connected to Silent Angel
  • F2 or suitable 12VDC linear power supply)
• ⑩ Type-C Interface
  • Reserved interface
• ⑪ Capacity Expansion Port
  • USB 2.0
• ⑫ USB Audio Output Port
  • USB AUDIO Ultra high-resolution digital audio output
• ⑬ Maintenance Port
  • Only for engineers to maintain equipment, do not use

Preparation

Preparation Work (1)

Make sure the audio devices are all powered off.

• Connect the Z1 PLUS Network port to a Bonn series or WiFi router LAN port with an Ethernet cable.
• Connect the USB AUDIO port to a USB DAC with the USB cable

Preparation Work (2)

• Connect the power adaptor to the circular power inlet in the rear panel.
• Connect the power adaptor to the AC outlet with power cord (Make sure the power cord has been plugged into the power adaptor before plugging into the AC outlet on the well

Advanced Connection Diagram

Power On

Power on Z1 PLUS by pushing the power button at the rear panel. The power LED will light on.

Power on other audio devices

Install“VitOS Manager”App on a Pad or Phone

Use below QR code to install “VitOS Manager” app on a pad or phone.

Use the “VitOS Manager” App to Control Z1 PLUS

By using the “VitOSManager”app on a iPad/iPhone/Android Pad/Android Phone, which is connected to the same LAN, you are able to discover Z1 PLUS, install Roon Server to Z1 PLUS, view system status of Z1 PLUS, Please refer to the official website for more function instructions http://www.silentangel.com

Use Mobile Device to Control Z1 Plus

Device Search Guide

If the device cannot be found when connecting, click the “Help” button

Enter the “Discover Guide” interface, enter the IP address of the Z1 Plus device in the space marked at the bottom of the interface, and then click “Connect”.

The connection to Z1 Plus is successful and the VitOS Manager main page is shown.

Install Applications

The connection to Z1 Plus is successful and the VitOS Manager main page is shown. Before using the application, you need to confirm the installation status of the application. If “Running” is displayed, it means it has been installed. If “Not Installed” appears, click the corresponding application, and then click the “Install” button.

After installing the application, “Downloading” is displayed. Wait until the download is completed to “100%”. If the status displays “Running”, the installation is successful.

Application Introduction

Orbiter Plugin：

Orbiter Plugin is an application plug-in that mainly builds music playback operations for VitOS devices. It is also an important program for VitOS

HQPlayer NAA：

HQPlayer NAA (Network Audio Adapter) enables VitOS devices to act as network adapters for HQPlayer running on a PC or music server. In this case, music data processing is performed by HQPlayer, and the processed data is then streamed asynchronously over the network to the NAA interfaced with the DAC.

Roon Server：

Roon Server is a music management and playback solution. It can play music through audio streaming and provides rich music library browsing, search, and recommendation functions. You can use it via the Roon App

Spotify Connect：

To use the functions of Spotify Connect, you need to install or open the Spotify App.

ReadyMedia:

ReadyMedia (formerly known as MiniDLNA) is a DLNA server for VitOS devices with installed data disks. With ReadyMedia installed on this VitOS device, you can use DLNA-compatible devices or software to browse and play music on the data disk.

DLNA Renderer：

DLNA Renderer is a music playback application that is compatible with the DLNA/UPnP standard. You can control the DLNA renderer to play music from DLNA servers (such as MinimServer and ReadyMedia) through the DLNA controller.

Trademark Attribution Notice

Windows is a trademark or registered trademark of Microsoft Corporation in the United States and other countries. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries.Android is a trademark of Google LLC, registered in the U.S. and other countries. Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries. Apple is a trademark of Apple Inc., registered in the U.S. and other countries.

Copyright 2024 Thunder Data Co., Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>