SILENT ANGEL 2A32K-B2 Bremen B2 HiFi Streamer User Guide
- June 3, 2024
- SILENT ANGEL
Table of Contents
ANGEL 2A32K-B2 Bremen B2 HiFi Streamer
User Guide
Package Contents
Front Panel
-
Previous Track Button
When you touch the previous song button, the current playing song will switch to the previous song in the playlist -
Pause / Play Button
When you touch the pause button, the current playing song will pause
When you touch the play button, the song will start playing -
Next Track Button
When you touch the next song button, the current playing song will switch to the next song in the playlist -
Increase Volume Button
When you touch the increase volume button, you can increase the volume of the current playing song -
Decrease Volume Button
When you touch the decrease volume button, you can decrease the volume of the current playing song -
System Status Indication
When B2 is booting, it flashes green light rapidly’
When B2 isn t connected to the network, it flashes green light slowly; when B2 is connected to the network, it shows green light
When B2 is connected by Bluetooth, it shows blue light
When the volume is at 0, it shows red light -
6.35mm Headphone Jack
Rear Panel
-
AC Input
AC power input -
Fuse Holder
Contain 2 fuses inside -
Power Switch
Control power on / off -
AES / EBU Port
Digital audio output, via 110 ohm balanced cable transmitting S / PDIF digital audio format
Pin definitions:
Pin 1 : Ground ( G )
Pin 2: Positive ( + )
Pin 3: Negative (-) -
12S Port
Digital audio output, differential digital audio signal with HDMI cable Pin definitions:
12S Digital Audio Output
**** PINT : SDATA- / DSD L| PIN11: GND
---|---
PIN2: GND| PIN12 : NC
PIN3: SDATA + / DSD L +| PIN13: NC
PIN4 : BCK + / DSD CLK +| PIN14: NC
PIN5: GND| PIN15: NC
PIN6 : BCK – / DSD CLK| PIN16 :NC
PIN? : LRCK- DSD R| PIN17: GIND
PIN8 : GND| PIN18: NC
PIN9 : LRCK + / DSD R +| PIN19: + 3.3V OUTPUT
PIN1O: NC| -
COAXIAL Port
Digital audio output, via 75 ohm coaxial cable transmitting S / PDIF digital audio signal -
RCA (L+R) Port
Analog audio output, with AC 2V -
M-IO Port
For expansion peripherals -
Reset Button
Wi–Fi Connection Mode:
Short press: switch to Bluetooth mode
Press and hold for more than 5 second: reset \Wi-Fi settings to default
Bluetooth Connection Mode:
Short press: switch to Wi-Fi mode
Press and hold for more than 5 seconds: disconnect the current Bluetooth mode, and reset Bluetooth
setting to default -
LAN Port
Fast Ethernet Network Interface
Amber LED: Lights up when its connected to 100Mbps Ethernet network, flashes when transmitting or’ receiving data
Green LED: Lights up when its connected to 10M bps Ethernet network, flashes when transmitting or’ receiving data
Signal Connections
Make sure all audio devices are powered off.
B2 supports Wi-Fi and Fast Ethernet connections. Therefore, when its connected
to Ethernet network, Wi-Fi’ connection will be turned off; when its not
connected to Ethernet network, the Wi-Fi connection will turn on’
Audio Applications
Power Connections
Power On
Install “VitOS Lite” App on a Pad or Phone
Use below QR code to install “VtOS Lite” app on a pad or phone.
https://apps.apple.com/cn/app/vitos-lite/id1586242465
https://play.google.com/store/apps/details?id=com.wifiaudio.VitOSLite
http://sec.thunder-
data.cn/static/files/saos/VitOS_Lite_for_Android_latest.apk
Using iOS device to connect
With Fast Ethernet Connection
With Wi-Fi Connection
Use the VitOS Lite to discover and setup the Wi–Fi setting of Bremen B2.
Using Android device to connect
With Fast Ethernet Connection
With Wi-Fi Connection
Searching and configaration breman B2s WI-Fi settings with vitos orbiter
Bluetooth Connection
Use Another Device to Connect Bluetooth
FCC Warnings
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Trademark Attribution Notice
WIndows Is a trademark or registered trademarks of Microsoft Corporation in
the United States and other countries. iOS is a trademark or registered
trademark of Cisco in the U.S. and other countries.Android is a trademark of
Google LLC, registered in the U.S. and other countries.Mac and macOS are
trademarks of Apple Inc., registered in the U.S. and other countries.Apple is
a trademark of Apple Inc., registered in the U.S. and other countries.
Copyright 2021 Thunder Data Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>