TWOPAGES B0C8SG7J66 Cordless Roman Shades Linen Textured Roman Installation Guide
- July 20, 2024
- TWOPAGES
Table of Contents
TWOPAGES B0C8SG7J66 Cordless Roman Shades Linen Textured Roman
PARTS INCLUDE
NECESSARY TOOLS
- Metal Tape Measure
- Pencil
- Drill
- Screwdriver
MOUNTING YOUR SHADE: OUTSIDE MOUNT (A)
Marking Holes
Determine the desired height and position of screws. mark them with a
pencil. and drill the holes in the wall or window frame. Make sure the holes
are level with each other.
Installing Brackets
Secure bracket B and spacer C together with the supplied silver hex
sets E. Then secure the bracket to the wall with the gold screw sets D . For
shade width wider than 47″. install the center support bracket. Install at the
approximate center of the headrail.
HAVE AN INSTALLATION CHALLENGE? GET IN TOUCH WITH OUR EXPERTS!
Inserting
Insert the top front of the head rail into the front slot of the brackets.
Then. secure the railing by pushing it into position. 
MOUNTING YOUR SHADE: INSIDE MOUNT (B)
Marking Holes
Determine the desired position of screw holes. mark them with a pencil. and
pre-drill the holes in the window frame. Make sure the holes are level with
each other.
Installing Brackets
Install the inner mounting bracket C with the golden screw sets D then
tighten the screws in place to install the brackets to the pre-drilled holes
on the wall. For shade width wider than 47″. install the center support
bracket. Install at the approximate center of the headrail.
Inserting
Insert the top front of the head rail into the front slot of the brackets.
Then. secure the railing by pushing it into position.
SHADE REMOVAL
To remove the Roman shade panel. insert a flat-head screwdriver into the back slot between the shade header and brackets to release the insertion. Then carefully pull the shade panel downwards to detach it. Repeat this process for each bracket if there are multiple ones. ensuring you hold the shade securely to prevent it from falling.
MUST READ NOTE: After unboxing. follow the installation instructions for hanging the Roman shade. Please do not tamper with or untie the lifting mechanism connected by the white cord at the back of the shade. as this may cause damage and render the shade inoperable.
TWOPAGEShttps://twopagescurtains.com
- Contact Us : Support@twopagescurtains.com
- + l 866-220-2391 (9:00-18:00 EST)