TWOPAGES Cordless Roman Shade Installation Guide
- August 6, 2024
- TWOPAGES
Table of Contents
TWOPAGES Cordless Roman Shade Installation Guide
HAVE AN INSTALLATION CHALLENGE?
GET IN TOUCH WITH OUR EXPERTS!
Contact Us: Support@twopagescurtains.com
+1 866-220-2391 (9:00-18:00 EST)
Cordless Roman Shade Installation
PARTS INCLUDE
NECESSARY TOOLS
- Metal Tape Measure
- Pencil
- Drill
- Screwdriver
MOUNTING YOUR SHADE: OUTSIDE MOUNT (A)
A1 Marking Holes
Determine the desired height and position of screws, mark them with pencil,
and drill the holes in the wall or window frame. Make sure the holes are level
with each other.
A2 Installing Brackets
Secure bracket B and spacer C together with the supplied silver
hex sets E then secure the bracket to the wall with the gold screw sets D.
For shade width wider than 47. install the center support bracket. Install
at approximate center of the headrail.
A3 Inserting
Insert the top front of the headrail into the front slot of the brackets.
Then, secure the railing by pushing it into position.
MOUNTING YOUR SHADE: INSIDE MOUNT (B)
B1 Marking Holes
Determine the desired position of screw holes. mark them with pencil, and pre-
drill the holes in the window frame. Make sure the holes are level with each
other.
B2 Installing Brackets
Install the inner mounting bracket C with the golden screw sets D then
tighten the screws in place to install the brackets to the pre-drilled holes
on the wall.
For shade width wider than 47″, install the center support bracket. Install at
approximate center of the headrail.
B3 Inserting
Insert the top front of the headrail into the front slot of the brackets.
Then, secure the railing by pushing it into position.
SHADE REMOVAL
To remove the Roman shade panel, insert a flat-head screwdriver into the back slot between the shade header and brackets to release the insertion. Then carefully pull the shade panel downwards to detach it. Repeat this process for each bracket if there are multiple ones, ensuring you hold the shade securely to prevent it from falling.
MUST READ NOTE:
After unboxing, follow the installation instructions for hanging the Roman
shade. Please do not tamper with or untie the lifting mechanism connected by
the white cord at the back of the shade, as this may cause damage and render
the shade inoperable.
TWOPAGES
https://twopagescurtains.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>