Shark HD100 HyperAir Hair Dryer Instruction Manual

: June 8, 2024
: Shark

Table of Contents

Shark HD100 HyperAir Hair Dryer
IMPORTANT SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
TROUBLESHOOTING & ERROR CODES
TWO (2) YEAR LIMITED WARRANTY
TECHNICAL SPECIFICATIONS
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark HD100 HyperAir Hair Dryer

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS

KEEP AWAY FROM WATER

DANGER
As with most electrical appliances, electrical parts are electrically live even when the switch is off:

To reduce the risk of death by electric shock:

Always unplug the unit immediately after using it.
Do not use it while bathing.
Do not place or store appliances where they can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
If an appliance falls into the water, unplug the unit immediately. Do not reach into the water.

WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:

An appliance should never be left unattended when plugged in.
Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water.
Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
Never use it while sleeping.
Never drop or insert any object into any opening or hose.
Do not use outdoors or operate where aerosol (spray) products are used or where oxygen is administered.
Do not use an extension cord with this appliance.
Do not direct hot air toward the eyes or other heat-sensitive areas.
Attachments may be hot during use. Allow them to cool before handling.
Do not place the appliance on any surface while it is operating.
While using the appliance, keep your hair away from the air inlets.
Do not operate with a voltage converter.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

Turn the dryer on and off.
Adjust the airflow. pressing the left-hand button allows you to choose a low, medium, or high airflow.
Adjust the temperature. Pressing the right-hand button allows you to choose a low, medium, or high temperature.
To attach any accessories included with your model, press them into place on the front of the dryer. You will know they are properly attached if the IQ logo on the back of the dryer illuminates when the dryer is turned on.
Press and hold the Cool Shot button for a cool burst of air to set your style.
Press the ALCI button to reset the dryer. See Troubleshooting & Error Codes for more information.

For further operating instructions, please consult the Styling Guide or scan the QR code.

Storage, Cord Safety, and Maintenance/Cleaning:

Ensure the cord is not knotted, twisted, or wrapped around any nearby objects when in use.
To store the dryer when not in use, wrap the cord in a circle and use the Velcro cord tag to secure the cord in place.
Use the Small Cleaning Brush included in the box at purchase as needed.

Clean dust and debris from the rear hair dryer filter.

TROUBLESHOOTING & ERROR CODES

MAINTENANCE/CLEANING

Reduction in Airflow or Overheating
A change in airflow or air power, airflow blockages, overheating, and visible buildup on the back of the unit indicates your hair dryer needs to be cleaned. We recommend using the Small Cleaning Brush included with your purchase to clean off the back of the hair dryer.

ALCI OPERATION

Electricity flickers or trips the circuit breakers during use
This dryer is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety feature that renders it inoperable under abnormal conditions. Should the dryer turn off in use, press the red Reset button on the plug and the dryer should function normally. If the dryer does not reset, please check your circuit breaker. If the issue persists, ensure there are no other appliances plugged in within the room where the dryer is being used. Do not use the dryer with a power strip.

OVERHEATING

The hair dryer is overheating or shuts off
This unit is equipped with a temperature-protective thermostat. If for some reason your hair dryer overheats, the thermostat will automatically turn the unit off. To prevent a power-down recurrence, unplug the hair dryer and set it aside to cool, or cool down using the cool shot button during use. Overheating may result if the unit is powered on for a long duration, or can indicate a blockage or dust buildup. We recommend using the Small Cleaning Brush included with your purchase to clean off the back of your unit. If overheating continues to occur, contact Customer Service at 855-522-0912.

If you are experiencing a different error code, please scan the QR code for additional troubleshooting or contact Customer Service at 855-522-0912.

TWO (2) YEAR LIMITED WARRANTY

The Two (2) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of two (2) years from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:

What is covered by this warranty?

The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to two (2) years from the original purchase date.
In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by this warranty?

Normal wear and tear of wearable parts (such as accessories), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at sharkbeauty.com.
Any unit that has been tampered with or used for commercial purposes.
Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
Consequential and incidental damages.
Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
Products purchased, used, or operated outside North America.

How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkbeauty.com for product care and maintenance self-help. Our Customer Service Specialists are also available at 855-522-0912 to assist with product support and warranty service options, including the possibility of upgrading to our VIP warranty service options for select product categories. So we may better assist you, please register your product online at registeryourshark.com and have the product on hand when you call.

SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement unit.

How to initiate a warranty claim
You must call 855-522-0912 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online
at registeryourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

For accessories and replacement parts, visit sharkbeauty.com/accessories