TAX4509/37 4000 Series Bluetooth Party Speaker

Product Information

Specifications

Model: TAX4509/37

Series: 4000 Series

Playability: USB and TF card

Product Usage Instructions

1. Important Safety Instructions

Read and understand all instructions before using the product to
ensure warranty validity.

2. Your Party Speaker

What’s in the Box: The package includes the
main unit and a remote control.

Remote Control: Prepare the remote control by
following the instructions in the manual.

Overview of the Main Unit: Familiarize yourself
with the main unit components.

3. Get Started

Connect Power: Plug in the power source.

Turn On: Power on the speaker.

Charge the Built-in Battery: Ensure the battery
is charged for wireless use.

Check the Battery Level: Monitor the battery
status for uninterrupted operation.

4. Play Audio through Bluetooth

Play from Bluetooth Device: Pair your device
with the speaker to play audio wirelessly.

5. Play from USB or TF Card

Play from USB or TF Card: Insert a USB or TF
card to play stored audio files.

Control Play: Use the controls to manage
playback.

Frequently Asked Questions (FAQ)

Q: Can I use the speaker near water?

A: No, it is advised not to use the speaker near water to
prevent damage and ensure safety.

Q: How do I change the speaker light effect?

A: You can change the speaker light effect by navigating through
the settings on the main unit or remote control.

Party Speaker
4000 Series
TAX4509/37
User manual
Register your product and get support at: www.philips.com/support

Contents

1 Important Safety instructions 2

Safety

2

2 Your party speaker

4

What’s in the box

4

Remote control

4

Prepare the remote control

5

Overview of the main unit

6

3 Get started

7

Connect power

7

Turn on

7

Charge the built-in battery

8

Check the battery level

8

4 Play audio through Bluetooth 9

Play from Bluetooth device

9

5 Play from USB or TF card

9

Play from a USB or TF card

9

storage device

Control play

9

6 FM radio

10

Turn on FM radio

10

Automatically scan

10

7 DBB effect

10

8 Record function

10

9 TWS Function

11

Pairing for stereo mode (TWS) 11

TWS operation

11

10 Other features

12

Play music from an

12

external device

Change the speaker light effect 12

11 Sing through microphone 12

Adjust microphone volume

12

Adjust echo

12

12 Guitar in

12

Adjust guitar volume

12

13 Product information

13

Specications

13

USB and TF card playability

13

information

Maintenance

13

14 Troubleshooting

14

About Bluetooth device

14

15 Notice

15

Care of the environment

15

Trademark notice

15

EN 1

1 Important Safety instructions
Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.
Safety
Know these safety symbols

Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specied by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer or sold with the apparatus. When a cart is used, use with caution when moving the cart/apparatus combination to avoid injury from tip-over.

This bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. Theexclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of re or electric shock, this apparatus s hould not be exposed to rain or moisture and objects lled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Warning
Never remove the casing of this device. Never lubricate any part of this device. Never place this device on other electrical equipment. Keep this device away from direct sunlight, naked ames or heat. Never look into the laser beam inside this device. Ensure that you always have easy access to the power cord, plug, or adaptor to disconnect this device from the power.
Do not use this apparatus near water. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Battery usage cautionTo prevent battery leakage which may result in bodily injury, property damage, or damage to the remote control:
Install the battery correctly, + and – as marked on the remote control. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, nimh, etc.) batteries. Remove the battery when the remote control is not used for a long time.
The battery shall not be exposed to excessive heat such as sunshine, re or the like. Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on apparatus (e.g. liquid lled objects, lighted candles). Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Caution
Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation.
2 EN

English
FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio / TV technician for help.
IC-Canada: CAN ICES(B)/NMB(B) This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.
FCC & IC Radiation Exposure Statement This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
WARNING Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
EN 3

Français
Informations de la FCC Cet appareil est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes :
ce dispositif ne peut pas causer d’interférences nuisibles et cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un mauvais fonctionnement.
Remarque : cet équipement a été soumis à des essais et a été déclaré conforme aux limites stipulées pour un appareil numérique de classe B, conformément aux spécications de la partie 15 du règlement de la FCC. Ces limites ont pour but d’assurer une protection raisonnable contre le brouillage nuisible dans une installation résidentielle. Cet équipement produit, utilise et peut émettre de l’énergie en radio fréquence et, s’il n’est pas installé et utilisé conformément aux directives, il peut causer un brouillage nuisible dans les communications radio.
Cependant, il est impossible de garantir qu’aucun brouillage ne se produira dans une installation particulière. Si cet équipement cause un brouillage de la réception de radio ou de télévision, ce qu’il est possible de déterminer en éteignant puis en rallumant l’équipement, l’utilisateur est prié d’essayer de corriger le brouillage au moyen de l’une ou de plusieurs des mesures suivantes :
Réorienter ou déplacer l’antenne de réception. Augmenter la distance entre l’appareil et le récepteur. Brancher l’appareil à une prise sur un circuit différent de celui sur lequel le récepteur est branché. Consulter le revendeur ou un technicien radio/TV expérimenté.
IC-Canada : CAN ICES(B)/NMB(B) L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
L’appareil ne doit pas produire de brouillage; L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Déclaration de la FCC et IC sur l’exposition aux rayonnements :
Cet équipement est conforme aux limites d’exposition aux rayonnements de la FCC et du Canada établies pour un environnement non contrôlé. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps. Cet émetteur ne doit pas coexister ou fonctionner avec une autre antenne ou un autre émetteur.
AVERTISSEMENT Les changements ou modications de cet appareil non expressément approuvées par la partie responsable de la conformité pourraient annuler l’autorisation de l’utilisateur à utiliser l’équipement.

2 Your party speaker
Congratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips offers, register your product at www.philips.com/support.
What’s in the box
Check and identify the contents of your package: Main unit x 1 Remote control x 1 (battery not included) AC power cord x 1 Quick start guide x 1 Safety sheet x 1 Warranty card x 1
Remote control
This section includes an overview of the remote control.

1

2

3

9

4

5

6

10

7

8

11

12

1
Mute/Unmute
2
Switch from BT/FM/AUX/USB/TF 3 Rec
Start/stop recording (not supported in BT mode)
4 Vol + Increase volume
5
In BT/USB/TF mode: Play/pause; In FM mode: Press and hold to start/stop automatic channel search
6
In BT/USB/TF mode: Go to the previous track In FM mode: Go to the previous channel stored 7 Vol Decrease volume
8
In USB/TF mode: Switch between “Repeat ONE” and “Repeat ALL”
9
Play/delete the record
10
In BT/USB/TF mode: Go to the next track In FM mode: Go to the next channel stored
11
DBB on/off 12 Select tracks/channels (with digital
combination) to play. (The combined number entered shall not exceed the total number of tracks / stored channels. Otherwise there will be no response.)

4 EN

Prepare the remote control
· The provided remote control allows the unit to be operated from a distance.
· Even if the remote control is operated within the effective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
· If the remote control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.
Replace the remote control battery
Slide to remove the battery compartment cover, insert 2 AAA batteries (1.5V) with correct polarity, then slide the battery compartment cover back into position. · Make sure the (+) and (­) ends of the
batteries match the (+) and (­) ends indicated in the battery compartment.

Precautions concerning batteries
· Be sure to insert the batteries with correct positive ” + ” and negative ” – ” polarities.
· Use batteries of the same type. Never use different types of batteries together.
· Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on their labels.
· Be aware of your ngernails when removing the battery cover and the battery.
· Do not drop the remote control. · Do not allow anything to impact the
remote control. · Do not spill water or any liquid on the
remote control.
· Do not place the remote control on a wet object.
· Do not place the remote control under direct sunlight or near sources of excessive heat.
· Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or re.
· Do not use any batteries other than those specied
· Do not mix new batteries with old ones.
· Never recharge a battery unless it is conrmed to be a rechargeable type.

EN 5

Overview of the main unit
Top panel:

1

2 3 4 56

7

20

8

19

9

10

18

11

17

12

13

16

14

15

1 Press to turn on or turn off the speaker. 2 MIC in1: Microphone input. 3 MIC in2: Microphone input. 4 Guitar in: Guitar input. 5 Audio in: Connect an external device
in AUX mode. 6 TF: TF card slot.
USB: USB port. 7 Guitar vol: Adjust guitar input volume.

8 Treble: Adjust the treble level. 9 Bass: Adjust the bass level. 10 Vol: Adjust the speaker volume. 11 Record : Short press to record the microphone
audio to USB or TF card; short press again to stop the recording and return to the current source. Long press 3 sec to play the record content. When playing the record content, long press 3 sec to delete the record content.
6 EN

12 : In USB/TF/Bluetooth mode, press to skip to the next track; long press 3 sec to enter/ exit TWS mode; in FM mode, select saved next channel.
13 : In USB/ TF/ Bluetooth mode, press to pause or resume play; in FM mode, long press 3 sec to search and save FM channels automatically; During recording, press to pause or resume record.
14 : Press to switch to BT mode. Long press 3 sec to disconnect from the current BT connection.
15 : Press to change speaker light mode 1/ 2/ 3/ 4/ 5/ 6/ 7/ 8/ 9/ 10/ Off.
16 : Press to select the input source among Bluetooth/ Aux/ FM radio/ USB/ TF .
17 : In USB/TF/Bluetooth mode, press to skip to the previous track; in FM mode, select saved previous channel.
18 DBB: Press to switch between DBB and DBB off.
19 Echo: Adjust the amount of echo. 20 Mic vol: Adjust the microphone volume in any
mode.
Overview of the main unit
Rear panel:

3 Get started

Caution

Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here:

Model No.

TAX4209/37

Serial No.

Connect power

Caution
Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the product. Risk of electric shock! When you unplug the power cord, always pull the plug from the socket. Never pull the cord.

Note
Before connecting to AC power, make sure that you have completed all other connections.
Connect the AC power cord to the AC in socket on the rear panel of the unit. Then plug the other end of the AC power cord into a power outlet.

1
1 AC IN: Connect the AC cable to get power supply.
EN 7

Power outlet socket and plug of power cord vary by regions.
Turn on
Press the button on top panel to turn on/off the speaker.

Charge the built-in battery
Plug the AC power cord to charge the built-in battery. The charging signal on the display screen indicates the charging status.

Check the battery level
When the speaker is turned on and not being charged, the battery signal on the display screen indicates the battery level.

Low battery
32% 65% 66%-Full
8 EN

4 Play audio through Bluetooth
Play from Bluetooth device
1 Press or button on the unit to switch to Bluetooth mode. You can see “bt” text display on the screen and the “bt” blinks.
2 On the Bluetooth device, switch on Bluetooth, search for and select [Philips TAX4209] to start connection. You will hear the prompt sound when the connection is successful. The screen stops blink.
3 After successful connection, play audio on the Bluetooth device.
4 Long press button for 3 sec, the speaker will disconnect with the Bluetooth device. You can see the display screen blinks “bt”and you will hear the prompt sound.
5 To exit Bluetooth, press to switch to another source.

5 Play from USB or TF card
Play from a USB or TF card storage device
1 Insert the USB or TF device into the USB or TF socket, and the unit switches automatically to USB or TF play mode.
TF
USB

Note
Before pairing a device with this product, read its user manual for Bluetooth compatibility. Any obstacle between this product and a Bluetooth device can reduce the operational range. Keep away from any other electronic device that may cause interference. The operational range between this product and a Bluetooth device is approximately 10 meters (30 feet). Before connecting another Bluetooth device, disconnect the current device rstly. When the Bluetooth device is beyond the valid Bluetooth distance, the unit will disconnect automatically from the device and enter Bluetooth paring mode.

2 Press / to select an audio track.

Control play

In USB or TF mode, follow the instructions below to control play.

Button & Operate Press

Action
Skip to the previous or next track

Press

Pause or resume play

Note
Make sure that the USB or TF device contains playable audio contents in supported formats. USB supported audio formats: MP3 TF supported audio format: MP3

EN 9

6 FM radio
Turn on FM radio
Press button to select FM mode until the display shows the FM frequency.
Automatically scan
Long pressing button for 3 sec, and the speaker will automatically search for FM channels. After searching nished, the searched channels will be saved automatically and the rst saved channel will be broadcast.
7 DBB effect
Turn the speaker on and play audio, press the DBB button on top panel to change the speaker bass effect: DBB/ DBB off.
Note
The speaker bass effect is set to DBB off by default.

8 Record function

The speaker can record your microphone or guitar audio to USB or TF device. Please note that recording is only enabled when a USB or TF device and a microphone or guitar is attached. To begin recording, the speaker can be in either AUX, USB, TF or FM mode.

Record operation

Button & Operate Press Record
Press
Long press Record for 3 sec

Action
Start to record or stop recording and return to the current source
Pause or resume the recording
Play the record content, or delete the record content when playing the record content

Note
In AUX mode, audio from Mic/ Guitar and AUX input will be recorded. In FM mode, audio from Mic/ Guitar and FM radio will be recorded. In USB or TF mode, only Mic/ Guitar input will be recorded. Insert your USB or TF device. The speaker will create a directory called ” Record” in which your recordings will be put. The record function is not available in BT mode.

10 EN

9 TWS Function
Note
· TWS works only if there are two identical party speakers (Philips TAX4209).
Pairing for stereo mode (TWS)
1 Turn the two speakers on and they will enter Bluetooth mode automatically. You can see “bt” text blinking on the screen.
2 Press and hold button on either speaker for 3 sec. Then both speakers enter stereo pairing mode (TWS). You can hear the prompt sound from the primary speakers.
3 When TWS is connected, the primary speaker displays “bt” and the secondary speaker displays “sec”. You will hear the prompt sound from both speakers.
4 To exit TWS, long press for 3 seconds on either speaker. You will hear the prompt sound from both speakers. Then both speakers exit TWS mode and return to Bluetooth mode.

Operation

Action

Press button on Change light mode

either speaker

on both speakers

EN 11

Operation

Action

Rotate Vol knob on Adjust volume on

either speaker

both speakers

Press button on Pause or resume play

either speaker

on both speakers

Press DBB button on Change DBB setting

either speaker

on both speakers

Press / button on either speaker

Skip to the previous or next track on both speakers

Rotate Treble knob Adjust the treble level

on either speaker

on both speakers

Rotate Bass knob on Adjust the bass level on

either speaker

both speakers

Plug MIC on primary speaker socket, and rotate Mic vol knob on primary speaker

Adjust the MIC volume level on primary speaker The function is not available on secondary speaker

Plug MIC on primary speaker socket, and rotate Echo knob on primary speaker

Adjust the echo level on primary speaker The function is not available
on secondary speaker

Plug Guitar on primary Adjust the Guitar volume

speaker socket and level on primary speaker.

rotate Guitar Vol knob on primary speaker

The function is not available on secondary speaker

When TWS is connected, the following functions will synchronize from the primary speaker to the secondary speaker. · Light mode · Volume · Play/ pause · DBB · Previous/ next · Treble · Bass
Note

In TWS connection,only button on the secondary speaker will not work. Press the button on the primary speaker, and the primary speaker will change to another source.

10 Other features
Play music from an external device
1 Select AUX mode: Press button until the screen displays “AUX” text.
2 Connect an audio cable (not supplied) with the connector on the device: The AUX socket on the speaker. The headphone jack on the device (MP3 player, cellphone, iPad, or other audio players).
3 Play audio on the device (refer to its user manual).

11 Sing through microphone
Adjust microphone volume
Connect a microphone (not supplied) into the Mic 1 /Mic 2 jack of the unit, and adjust the microphone volume by rotating the Mic vol knob.
Adjust echo
Adjust the microphone echo level to your desired level by rotating the Echo knob on the top panel.
12 Guitar in
Adjust guitar volume
Connect a guitar to this party speaker directly through the Guitar in jack on the top panel. 1 Use a 6.3mm (1/4″) guitar connector
(not supplied) to connect your guitar to the Guitar in jack.
2 The volume of your connected guitar can be controlled by the Guitar vol knob on the top panel.

Change the speaker light
effect
Press the button on the top panel to change the speaker light mode: Light mode 1/ Light mode 2/ Light mode 3/ Light mode 4/ Light mode 5/ Light mode 6/Light mode 7/ Light mode 8/ Light mode 9 / Light mode 10/ Light off.

1
Guitar in
6.3mm

2

Guitar. vol

12 EN

13 Product information

Specications
Amplier
Power (RMS) Signal to noise ratio Frequency response Total harmonic distortion

60W 65db 40Hz-20KHz,-12dB 1%

Speaker
Speaker impedance

Bass 4 Tweeter 6

Sensitivity

Bass 88 dB±3dB/m/W Tweeter 89 dB±3dB/m/W

USB
USB direct version

2.0 Full Speed

Bluetooth
Bluetooth version Bluetooth frequency band Bluetooth range

V5.0
2.402 GHz ~2.480 GHz ISM Band 10m (free space)

General information

AC power Battery capacity

100-240V ~ , 50/60 Hz
7.4V, 5200mAh (Built-in rechargeable)

Battery life

*Up to 16 hours

Battery charge time

6 hours

Dimensions
Main unit ( W x H x D )

325.5x705x325.5mm

Weight
Main unit

10.7kg

*Battery life reaches up to 16 hours but can change with music type, usage, and over time. This estimate assumes a specic music source, lights off, volume set to 14,DBB OFF, and Bluetooth streaming.
USB and TF card playability information
Compatible devices: USB ash memory ( USB 2.0 ) USB ash players ( USB 2.0 ) TF card
Supported formats: File formats: FAT, FAT12, FAT16, FAT32, exFAT Audio formats: MP3 Maximum support 128G USB and TF Card. (If USB or TF card is larger than 128G, the playback and record function can not be worked normally).
Maintenance
Clean the cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,ammonia or abrasives.

EN 13

14 Troubleshooting
Caution
Never remove the casing of this unit.
To keep the Warranty valid, never try to repair the system yourseIf. If you encounter problems when using this unit, check the following points before requesting service. If the problem remains unsolved, go to the Philips website (www.philips.com/support). When you contact Philips, ensure that your unit is nearby and the model number and serial number are available.
No power · Ensure that the unit is fully charged or
connected with a power source. · Ensure that all the required cables are securely
connected. · Ensure that the unit is switched on. · To save power, the unit switches to standby
automatically 15 minutes after a play reaches the end and no control is operated.
No sound · Adjust the volume.
No response from the unit · Disconect and reconnect the AC power plug,
then turn on the unit again.
Cannot play some les in USB device The number of folders or les in the USB device has exceeded a certain limit. This phenomenon is not a malfunction. The formats of these les are not supported.
USB device not supported The USB device is incompatible with the unit. Try another one.

About Bluetooth device
The audio quality is poor after connection with a Bluetooth-enabled device
The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.
Cannot connect with the device The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function. This product is already connected with another Bluetooth-enabled device. Disconnect that device and then try again.
The paired device connects and disconnects constantly
The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.

14 EN

15 Notice
Any changes or modications made to this device that are not expressly approved by MMD Hong Kong Holding Limited may void the user’s authority to operate the equipment.
Care of the environment
Disposal of your old product and battery
Your product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol on a product means that theproduct is covered by European Directive 2012/19/EU.
This symbol means that the product contains batteries covered by European Regulation (EU) 2023/1542 which cannot be disposed of with normal household waste. Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
Removing the disposable batteries To remove the disposable batteries, see battery installation section.

Environmental information Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Trademark notice
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
This is CLASS Il apparatus with double insulation, and no protective earth provided.

EN 15

Specications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.
TAX4509_UM_V1.0

References

• Philips Customer Service Support - Home | Philips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>