Ensenior 4I-3000K-4PACK 4 Inch Ultra Thin LED Recessed Ceiling Light User Manual
- June 5, 2024
- Ensenior
Table of Contents
Ensenior 4I-3000K-4PACK 4 Inch Ultra Thin LED Recessed Ceiling Light
IMPORTANT INSTARUCTION
SAFETY INSTRUCTION
In seniors, recessed lighting is certified by ETL & Energy Star (except 6000K
& 6CCT) of a high standard. This fanless LED recessed light is IC rated, with
more convenient and secure UL connectors. But to reduce the risk of death,
personal injury or property damage from fire, electric shock and other
hazards, please read all warnings and instructions included with and on the
fixture box and all fixture labels, please review instructions carefully
before proceeding.
WARNING
- RISK OF ELECTRIC SHOCK
- All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
- Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Turn off the switch and circuit breaker before installing this LED light.
- Do not alter, re-locate or remove wiring.
- Double-check all connections to be sure they are tight and correct.
- Verify that the supply voltage is correct by comparing it with the luminaire label information.
- RISK OF FIRE
- Keep combustibles and other materials that may burn away from lights.
- The maximum ambient temperature is 104°F. Do not operate fixtures at temperatures higher than it.
- RISK OF INJURY
- The knockouts may be sharp. Wear gloves and safety glasses at all time when removing luminaires, installing or performing maintenance.
- Avoid direct eye exposure to the light source while it is on.
- Wear rubber-soled shoes and work on a sturdy wooden ladder.
- RISK OF BURN
- Do not touch the enclosure or light source. It is normal of the luminaire surface to heat up during work. Allow lights to cool before handling.
- RISK OF PRODUCT DAMAGE
- Electrostatic Discharge (ESD): ESD can damage LED fixtures. Personal grounding equipment must be worn during all installation or servicing of the unit.
- Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
- Do not mix our product with other products (including Ensenior’s light, eg. 4″ and 6″). The mixing junction box of different power will lead to the destruction of the product.
- Do not let the product directly contact with water. Our product is damp-rated but it is not water-proof.
- Do not make or alter any open holes in an enclosure of wiring or electrical components.
- Never connect components under load.
- Please make sure that all wires in and out are wired firmly and sufficiently. If not, there will be a flickering issue or the light will just stop.
IMPORTANT
- Our temperature has been strictly monitored. But the temperature will be slightly different with varied monitors. Please test them before installation up in the ceiling wall and see the color ifit meets your needs.
- If there is anything wrong with our lights, please see the Troubleshooting page. If you could not find an answer in that page, please refer to the
- Customer Service page and contact us.
ROUTINE MAINTENANCE
- Please make sure the power is off before maintenance.
- To avoid any damage to the product, please do not use any chemical solvents during the routine maintenance.
- To ensure better lighting, please clean the lamp at regular intervals.
LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so, please contact the Customer Service Team at +1 (213)-296-2111 or visit service@ensenior.net
STEP-BY-STEP INSTALLATION
- Cut a hole with 1:1 size of the cutting template.
- Open the junction box and remove knock-out on the side. Run wire from the power source through the hole.
- Use the connector to tuck the wires according to the color. f the light is color selectable (CCT), flip the switch on the side of the junction box to locate the setting that you like.)
- Connect (tightly by hand) the junction box to the light panel
- Put the box in the ceiling hole. Push up the spring clips.
- Push the light in to the ceiling and power on.
SPECIFICATIONS
LIGHTING PERFORMANCE
ENVIRONMENT
CONSTRUCTION
LIFESPAN
DIMMER COMPATIBILITY GUIDE
TROUBLESHOOTING
CUSTOMER SERVICE
-
12 HOURS Quick Response
- If there is any problem with our light, please refer to the Troubleshooting page on the back. If you still could not fix this, please contact us immediately. It doesn’t matter if you have installed the product, we will respond within 12 hours
-
30-DAY Money Back
- For 30 days after the date of purchase, return your Ensenior product and receive a full refund for ANY reason.
-
5-YEAR WARRANTY
- For 5 years after the date of purchase, if there is any issue with the product, we will send a new product for free or a full refund. (no need to return the purchased product) Under most conditions, we will not require you to return the purchased items. Sure, if you would return the defective one(s) to us, we will be very happy for that would help us to make continuous improvements.
-
Free Replacement No Repair
- After the buyer purchases the product, if the product has a quality problem within the scope of the seller’s warranty service within the service validity period, the seller will replace the buyer with a new product for free.
-
FRIENDLY REMINDER
- We sincerely hope to solve the problem for you. We do not recommend that you leave a product rating first, because we cannot obtain your contact information through the review/feedback, nor can we obtain your relevant information and provide you with compensation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>