Satel ROP-400/EU Fire Alarm System Owner’s Manual
- August 6, 2024
- Satel
Table of Contents
Satel ROP-400/EU Fire Alarm System
Product Information
Specifications:
- Product Name: FIRE ALARM SYSTEMS ACSP System / Manual call points ROP-400/EU
- Operating Temperature Range: 18°C to 26°C
- Power Supply Voltage: 18 to 26 V DC
Product Usage Instructions
- Installation: Follow the installation guidelines provided in the user manual to set up the FIRE ALARM SYSTEMS ACSP System / Manual call points ROP-400/EU.
- Power Supply: Ensure the power supply voltage is within the range of 18 to 26 V DC for proper functioning of the system.
- Operation: Familiarize yourself with the system’s operation procedures, including detecting and emitting alarms, as outlined in the user manual.
Frequently Asked Questions (FAQ):
-
Q: What should I do if the alarm system triggers a false alarm?
A: In case of a false alarm, verify the cause and reset the system following the instructions in the user manual. If the issue persists, contact customer support for assistance. -
Q: Can additional call points be added to the system?
A: Depending on the system’s capacity, additional manual call points may be added. Refer to the user manual for guidelines on expanding the system. -
Q: Is it possible to adjust the sensitivity of the detection system?
A: The sensitivity of the detection system may be adjustable based on the model. Check the user manual for information on adjusting sensitivity settings.
ROP-400/EU
The ROP–400 call point is used to manually trigger an alarm when a fire is
discovered. It is designed to operate in the detection line of the ACSP–402
addressable fire alarm control panel.
- resettable plastic pane
- ROP–KEY–U key (sold in set) to enable:
- testing
- resetting
- LED indicator
- double–sided short–circuit isolator
- power supply from the detection line
- optional mounting box – ROP–BT / ROP–BS
- optional protective cover to prevent unintentional activation – ROP–FLAP
Specification
Operating temperature range -10°C…+55°C
Weight 86 g
Maximum humidity 95%
Dimensions 87 x 87 x 40 mm
Current draw when detecting 170 μA
Current draw when emitting an alarm 450 μA
Power supply voltage 18…26 V DC
The actual appearance of the products may differ from the presented images.
Product descriptions are provided in the web service for information purposes
only.
www.satel.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>