LIEBHERR EWTdf 1653 Vinidor Built In Wine Storage Cabinet Instruction Manual

: August 4, 2024
: LIEBHERR

LIEBHERR EWTdf 1653 Vinidor Built In Wine Storage Cabinet

INSTRUCTION MANUAL

LIEBHERR EWTdf 1653 Vinidor Built In Wine Storage
Cabinet

Disposal notes

The appliance contains reusable materials and should be disposed of properly – not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.

When disposing of the appliance, ensure that the refrigerant circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil.

Disable the appliance.
Pull out the mains plug.
Cut through the connection cable.

WARNING

Danger of suffocation due to packing material and plastic film!
Do not allow children to play with packaging material.
Take the packaging material to an official collec-tion point.

Description of the appliance

1. Operating and control elements

2. Pull-out shelves
3. Interior light (LED light strip)

4. Activated charcoal filter
5. Adjustable-height feet
6. Type plate
7. Presentation shelf

Safety instructions and warnings

To prevent injury or damage to the unit, the ap-pliance should be unpacked and set up by two people.
In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains.
To guarantee safe operation, ensure that the ap-pliance is set up and connected as described in these operating instructions.
Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse.
When disconnecting the appliance, pull on the plug, not on the cable.
Any repairs and work on the appliance should only be carried out by the customer service department, as unauthorised work could prove highly dangerous for the user. The same applies to changing the mains power cable.
Do not allow naked flames or ignition sources to enter the appliance. When transporting and cleaning the appliance, ensure that the refrigerant circuit is not damaged. In the event of damage, make sure that there are no ignition sources nearby and keep the room well ventilated.
Do not stand on the plinth, drawers or doors or use them to support anything else.
This appliance can be used by children of 8 years old and over, and also by persons with restricted physical, sensory or mental capacity or lack of experience and knowledge, if they are supervised or have been instructed on safe use of the appli-ance and understand the resulting risks. Children must not be allowed to play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision.
Avoid prolonged skin contact with cold surfaces or chilled/frozen food. This could cause pain, numb-ness and frostbite. In the case of prolonged skin contact, protective measures should be taken,
e. g. gloves should be worn.
Do not consume food which has been stored for too long, as it could cause food poisoning.
Do not store explosives or sprays using com-bustible propellants such as butane, propane, pentane, etc. in the appliance. Electrical com-ponents might cause leaking gas to ignite. You may identify such sprays by the printed contents or a flame symbol.
Do not use electrical appliances inside the ap-pliance.
If you have a lockable appliance, do not keep the key near the appliance or within reach of children.
The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.
The LED light strips illuminate the interior of the appliance. They are not suitable for lighting a room.

Range of appliance use

The appliance is suitable solely for storing wine in a domestic environment or similar. This includes, for example, use

– in staff kitchenettes, bed and breakfast establish-ments,
– by guests in cottages, hotels, motels and other forms of accommodation,
– in catering and similar services in the wholesale trade.

Use the appliance solely as is customary within a domestic en-vironment. All other types of use are inadmissible.
The appliance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Directive. Any misuse of the appliance may result in damage to or spoilage of stored goods.
Furthermore, the appliance is not suitable for operation in poten-tially explosive atmospheres.

Climate rating

The climate rating indicates the room temperature at which the appliance may be operated in order to achieve full refrig-eration performance.
The climate rating is indicated on the type plate.

The position of the type plate is shown in the section entitled Description of the appliance.

Climate rating	Room temperature
SN	+10°C to +32°C
N	+16°C to +32°C
ST	+16°C to +38°C
T	+16°C to +43°C
SN-ST	+10°C to +38°C
SN-T	+10°C to +43°C

Do not operate the appliance outside the specified room temperature range.

Setting up

Avoid positioning the appliance in direct sunlight or near cookers, radiators and similar sources of heat.
Standard EN 378 specifies that the room in which you install your appliance must have a volume of 1 m3 per 8 g of R 600a refrigerant used in the appliance, so as to avoid the formation of inflammable gas/air mixtures in the room where the appliance is located in the event of a leak in the refrigerant circuit.
The quantity of refrigerant used in your ap-pliance is indicated on the type plate on the inside of the appliance.
Do not cover ventilation openings or grille.

Electrical connection

Only operate the appliance with alternating current (AC).
The permissible voltage and frequency are indicated on the type plate. The position of the type plate is shown in the section entitled Description of the appliance.
The socket must be properly earthed and protected by a fuse.
The tripping current of the fuse must be between 10 A and 16 A.
The socket must not be situated behind the appli-ance and must be easily accessible.
Do not connect the appliance using an extension cable or extension socket.

Do not use stand-alone inverters (conversion of direct current to alternating /three-phase current) or energy-saving plugs. Risk of dam-age to the electronic control system!

Operating and control elements

The electronic control panel has the new “touch capacitance technology”. Any function can be activated by touching the corresponding icon.
The exact contact point is between the symbol and its label

Operating

1. Upper compartment temperature display
2. Lower compartment temperature display
3. Upper compartment temperature setting buttons 4 Lower compartment temperature setting buttons 5 On/Off button (switching the appliance on and off) 6 Audible warning On/Off button
7. Fan switch
8. Interior light On/Off button

Symbols in the display

| Alarm (symbol flashes if the temperature inside the appli-ance is too high or too low)
---|---
DEMO| Demo mode is activated
MENU| Setup mode is activated (activating the child lock and adjusting the display brightness
| The interior fan runs constantly
| Child lock is activated
| The interior light is switched on constantly

Switching the appliance on and off

Switching the appliance on
Press the On/Off button until the temperature display lights up.

Switching the appliance off

Keep the On/Off button pressed for approx. 3 seconds so that the temperature display goes out.

Setting the temperature

The temperature of both com-partments can be set sepa-rately.
1. Upper compartment
2. Lower compartment
Reducing the temperature Press the Down button.
Increasing the temperature Press the Up button.

– When pressing one of the buttons for the first time, the display will start to flash.
– Pressing this button again enables you to change the temperature setting.
– The electronic control system will switch over automatically about 5 seconds after the last time you pressed the button, and the actual temperature will be displayed.

The temperature can be set at between +5°C and +20°C.
The following drinking temperatures are recommended for the various types of wine.
Red wines: +14°C to +20°C
Rosé wines: +10°C to +12°C
White wines: +8°C to +12°C
Sparkling wines, Prosecco: +7°C to +9°C
Champagne: +5°C to +7°C
If you are storing wine for long periods of time, it should be stored at a temperature of between +10°C and +12°C.

Fan

The interior fan ensures a constant and even interior temperature and a suitable climate for wine storage.

The humidity in the appliance can be increased even further by activating the Ventilation button. This has a particularly positive effect for long-term storage.

The increased level of humidity prevents the corks from drying out.

Door open alarm

If the door is left open for more than 60 seconds, the audible warning signal will sound.
If the door must be opened for a lengthy period to place items into the appliance, cancel the audible warning signal by pressing the Alarm button.

The alarm switches back to standby when the door is shut.

Temperature alarm

If the temperatures in the interior are out of the permitted range, the audible warning signal will sound and the temperature display will flash.

Cancel the audible warning signal by pressing the Alarm button.

After a lengthy power failure, the temperature in the interior may have risen to too high a level. After the power supply returns, the fall in temperature can be watched on the display.
The temperature display will stop flashing as soon as the tem-perature in the interior has reached the set value.
Temperature alarm after a fault in the appliance

If the appliance develops a fault, the temperature in the interior may rise too high or fall too low. The audible warning signal will sound and the temperature display will flash.

Cancel the audible warning signal by pressing the Alarm button.

If the temperature displayed is too high (warm), first check whether the door is closed correctly.
If the temperature display continues to show a value that is too high or too low after one hour, contact the customer service department.
If F1, F8, E1, E2, E7 or E8 appears in the display, the appliance has suffered a fault.
In this case, contact the customer service department.

Set-up mode

In set-up mode, you can set the child lock and adjust the brightness of the display. The child lock is designed to protect the appliance from being switched off and the temperature setting from being changed accidentally.

Activating the child lock

Set-up

Deactivating the child lock

Adjusting the display brightness

The adjusted brightness will be activated after one minute.

Note
If a button is pressed, the display lights up for one minute at maximum brightness.
When commissioning the appliance, the adjusted brightness will only be active once the set interior temperature of the appliance has been reached.

Interior light

The interior of the appliance is lit by an LED light strip at the top of each compartment.
The interior light will always switch on when the appliance door is opened. The interior light will go out approx. 5 seconds after the door is closed.
Press the Light button if you want the interior light to be on even when the door is closed.

Note
This function applies to the lighting of both compartments.
Furthermore, the brightness of the lighting can be adjusted.

Press the Light button.
Press and hold the Light button and at the same time press the temperature setting buttons to in-crease or decrease the brightness.

Note: The brightness will change in all compartments.

The light intensity of the LED light corresponds to laser class 1/1M.

Important

The light cover may only be removed by customer service staff.
If the cover is removed, do not look directly at the light through optical lenses from close distance. This can dam-age your eyes.

Labels
The appliance is supplied with one label for each wooden shelf.
Use these to label the type of wine stored on each shelf.
Additional labels can be obtained from your dealer.

Air exchange with activated charcoal filter

The way in which wines continue to mature depends on the ambient conditions.
The quality of the air is therefore decisive for preserving the wine.
We recommend that you replace the illustrated filter once a year. Filters can be obtained from your dealer.

Changing the filter

Push the cover in and release it again.

Pull out the filter.

Insert the filter

Insert the cover, push it in as far as it will go and then release it again.
The cover is automatically locked into place.
You will hear a click.

Removing and inserting the wooden shelves

The wooden shelves can be removed for easier cleaning of the inside of the appliance.

Removing the wooden shelf

Pull the wooden shelf upwards on the right and left at the back (release) and then remove it towards you.

Inserting the wooden shelf

Extend the pull-out rails as far as they will go. Place the front recesses of the wooden shelf on the securing pins.

Slide the wooden shelf together with the pull-out rails into the appliance as far as they will go.

Push the wooden shelf right to the back so that it clicks into place at the front.
Push the wooden shelf downwards on the right and left at the back and click into place.

Storage diagram

for 0.75 l Bordeaux bottles to standard NF H 35-124

EWTdf 1653

EWTdf 1653

EWTdf 2353

EWTdf 2353

EWTdf 3553

EWTdf 3553

Total 80 bottles

Important
The maximum load per wooden shelf is 25 kg.

Storage diagram Presentation shelf

Cleaning

Before cleaning always switch off the appliance. Pull out the mains plug or switch off or unscrew the fuse.

Clean the inside and outer walls with lukewarm water and a lit-tle detergent. Do not use abrasive or acid cleaners or chemical solvents.
Use a glass cleaner to clean the glass surfaces and a commercially available stainless-steel cleaning agent for the stainless-steel surfaces.

Do not use steam cleaners because of the risk of injury and damage.

Ensure that no cleaning water penetrates into the elec trical components or ventilation grille.
Do not damage or remove the type plate on the inside of the appliance. It is very important for servicing purposes.

Malfunctions

F0 or F1 appears in the display.
– The appliance has suffered a fault. Contact the customer service department.
The fans inside the appliance are running although the fan function has been deactivated and the compressor (refrigeration unit) is idle.
– This is a normal operating state depending on the set interior temperature and ambient temperature at the place of installation.
You may be able to rectify the following faults by checking the possible causes yourself.
Appliance does not function:
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the fuse intact?
When inserting the mains plug, the refrigeration unit does not switch on, but a value is shown in the temperature display.
– Demo mode is activated. Contact the customer service department.
Loud running noise:
– Is the appliance set up firmly on the floor?
– Does the appliance cause nearby items of furniture or objects to
vibrate? Please note that noises caused by the refrigerant circuit
cannot be avoided.
– Due to the various speed steps, speed-regulated compressors
can generate different running noises.
The sound is normal.
The temperature is not low enough:
– Is the temperature setting correct (see “Setting the temperature”)?
– Does the separately installed thermometer show the correct reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
The compressor runs for a long time.
– The compressor switches to a low speed when little cold is needed.
Although the running time is increased as a result, energy is saved.
This is normal in energy-saving models.
A low hum.
– The sound is produced by air flow noise of the fan.
The sound is normal.
The internal light does not come on.
– The appliance is not switched on.
Switch the appliance on.
– The door was open for longer than 15 minutes.
The internal light switches itself off automatically after about 15
minutes if the door is open.
– The LED illumination is faulty or the cover is damaged.

If none of the above causes apply and you cannot rectify the fault yourself, contact the nearest customer service de-partment stating the type des-ignation 1, service number 2and appliance number 3as indicated on the type plate.

The position of the type plate is shown in the section entitled Description of the appliance.

Shutting your appliance down
If your appliance is to be shut down for any length of time, switch it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent unpleasant smells.
The appliance complies with the relevant safety regulations and EU Directives 2014/30/EU and 2014/35/EU.

Specifications

Model Numbers: EWTdf 1653 / 2353 / 3553
Features: Pull-out shelves, LED interior light, Activated charcoal filter, Adjustable-height feet, Presentation shelf
Climate Rating: SN N ST T SN-ST SN-T
Electrical Connection: AC, Voltage and frequency as indicated on type plate, Fuse tripping current between 10A and 16A