CarlinKit B09CP Wireless Carplay Activator Ai Box User Manual

CarlinKit B09CP Wireless Carplay Activator Ai Box

Specifications

• Product Name: AI Box
• Model : AIBox-BT_****
• Compliance: FCC Radiation Exposure
• Usage: Portable

Product Usage Instructions

Installation and Setup

1. Reorient or relocate the receiving antenna for optimal signal reception.
2. Increase the separation between the AI Box and any other electronic equipment to avoid interference.
3. Connect the AI Box to a power outlet on a different circuit than other devices.

Usage Guidelines

The AI Box is designed for portable use and can be used in various exposure conditions without restrictions. Follow these guidelines for optimal performance:

• Avoid exposing the AI Box to extreme temperatures or moisture.
• Keep the AI Box away from strong magnetic fields.
• Avoid dropping or subjecting the AI Box to physical shocks.

M aintenance and Care

To ensure the longevity of your AI Box, follow these maintenance tips:

• Clean the exterior with a soft, dry cloth.
• Avoid using harsh chemicals or solvents for cleaning.
• Store the AI Box in a cool, dry place when not in use.

FAQ

• Q : Can the AI Box be used with other Bluetooth devices?
• A : Yes, the AI Box is compatible with most Bluetooth-enabled devices. Simply pair the devices following the user manual.
• Q : How can I troubleshoot connectivity issues with the AI Box?
• A: If you experience connectivity problems, try turning off both devices and then reconnecting. Ensure that the devices are within the recommended range for Bluetooth connection.

Notice to all users:
This wireless carplay activator is for converting wired carplay to wireless only, supporting original car units equipped with OEM wired carplay, and aftermarket radios, such as Boss, Alpine, Pioneer, JVC, Kenwood, etc. For Sony aftermarket radios XAV-AX series which have original wired carplay, the audio issue is not optimized. Please contact the customer service team first for the news before using this wireless carplay activator.

PRECAUTION

Note the manual.

• Thank you for purchasing this product. Please read through these instructions so that you will know how to operate your model properly. After finished reading the instructions, keep this manual in a safe place for future reference.
• If the wireless carplay activator works properly on your car, it is not necessary to upgrade a new firmware online, as it may affect the current usage of the wireless carplay.

HOW TO CHECK A CAR HAS CARPLAY OR NOT

1. Plug an iPhone running IOS 10 or newer) into the car USB ports with genuine factory lighting cable. If there is a notification pop-up on your iPhone like below, your car has built-in Apple Carplay.
2. If there is a Carplay icon in the stereo menu, that your car has built-in Apple Carplay.
3. Contact your car dealer for help.

CONNECTION STEPS

1. Connect the box to the original car USB Data interface; Press the’ APP’ button or Enter to the Carplay page; Read box data and wait for a connection;
2. Turn on the Bluetooth of the iPhone, and search for the Bluetooth Device naming: ” AlBox-BT_** “. Payback allow Carplay. NOTE:** If you have connected to the original car Bluetooth or other Bluetooth devices, please disconnect them before connecting to the dongle
3. After the connection, please wait for a few seconds and the CarPlay interface will be shown;

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in porlable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>