Beatbot A100 Pro Cordless Robotic Cleaner and Skimmer User Guide
- August 5, 2024
- Beatbot
Table of Contents
Beatbot A100 Pro Cordless Robotic Cleaner and Skimmer
Quick User Guide
A100 Pro
Product Structure Diagram
- Push-to-open Switch
- Filter Basket Cover
- Water Outlet
- Clarifying Agent Kit Cover
- Propeller*2
- Handle
- Ultrasonic Smart Sensor*2
- Track Wheel*2
- Panel Indicator
- Mode Button
- Clarifying Agent Kit (sold seperately)
- Dual Filter Basket
- Dual Roller Brush*2
Robot Button
-
Hotspot Configuration
Press and hold both “Power”+”(3 ) Quick Mode” (1) buttons for about 3s to trigger the hotspot configuration (You should trigger the hotspot configuration before connecting to the APP -
Factory Reset
-
Press and hold “Standard mode” (2) +”Power” (3)+ “Pro Mode” (4)buttons for about 10s to restore the factory settings.
APP
- APP Download
You can either scan the QR code below or search for “Beatbot” in the App Store or Google Play to download the APP.
Robot Connection
Please check the following items before connecting:
-
Make sure the robot is turned on;
-
Confirm that both your mobile phone and the robot are within the same Wi-Fi coverage range with a strong signal;
-
Keep the phone close to the robot (within 1m distance);
-
Ensure your phone is connected to Wi-Fi, supporting only the 2.4GHz network.
-
Scan to add:
Tap the “Scan to Add” on the home page of the App, aim the camera at the QR code on the robot and follow the App instructions to complete the connection. -
Add manually:
Tap the “Add Device” on the home page of the App, choose your robot model, and follow App instructions to complete the connection.
Preparation Before Use
Charging
- Install the charge dock
- Plug into the power supply
- Place the robot
- Charging
Before Cleaning
Before entering the water, it is crucial to place the robot on a level ground
and to wait for about 5s for it to calibrate. By following these steps, you
ensure maximize the effectiveness of the robot’s cleaning path.
- Ensure the robot has sufficient power (the indicator shows solid green).
- Set the cleaning mode, and the selected mode button will show solid white.
- Place the robot on a level ground and wait for about 5s for it to calibrate.
- Place the robot in the water to start automatic cleaning.
After the cleaning task is completed, the robot will automatically dock on the surface next to the wall. But if the robot is pulled out with a hook during cleaning, it will not have enough time to drain, and the robot will not surface. Please continue to let the robot drain for 2-3 minutes.
Tips
- If this is your first time using the pool this season, we recommend that you dean it manually first by removing any large debris. After that, you can use the robotic pool cleaner to maintain the cleanliness. This is because if there’s a lot of debris left in the pool during the off-season, using the robot will cause the filter basket to clog more quickly and require more frequent cleaning. Therefore, it’s more convenient to start with manual cleaning.
- Each machine undergoes thorough testing, including underwater testing, before leaving the factory. As a result, there may be some residual water stains, which is normal. Please feel free to use it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>