Beatbot A100 Smart Pool Robot User Guide
- June 1, 2024
- Beatbot
Table of Contents
Beatbot A100 Smart Pool Robot
Product Structure Diagram
- Push-to-open Switch
- Filter Basket Cover
- Water Outlet
- Ultrasonic Smart Sensor*2
- Handle
- Track Wheel*2
- Dual Roller Brush*2
- Filter Basket
- Mode Button
- Panel Indicator
Robot Button
-
Hotspot Configuration
Press and hold both “Quick Mode” (1) + “Power” (2) buttons for about 3s to trigger the hotspot configuration. -
Factory Reset
Press and hold the “Quick Mode” (1), “Power” (2) and “Standard Mode” (3) buttons simultaneously for about 10s to restore the factory settings.
APP
APP Download
You can either scan the QR code below or search for “Beatbot” in the App Store
or Google Play to download the APP.
Robot Connection
Please check the following items before connecting:
- Make sure the robot is turned on;
- Confirm that both your mobile phone and the robot are within the same Wi-Fi coverage range with a strong signal;
- Keep the phone close to the robot (within 1m distance);
- Ensure your phone is connected to Wi-Fi, supporting only the 2.4GHz network.
Scan to add:
Tap the “Scan to Add” on the home page of the App, aim the camera at the QR
code on the robot and follow the App instructions to complete the connection.
Add manually:
Tap the “Add Device” on the home page of the App, choose your robot model, and
follow the App instructions to complete the connection.
Preparation Before Use
Charging
Before Cleaning
Before entering the water, it is crucial to place the robot on level ground and to wait for about 5s for it to calibrate. By following these steps, you ensure maximize the effectiveness of the robot’s cleaning path.
After the cleaning task is completed, the robot will automatically dock on the surface next to the wall. If the robot is pulled out with a hook during cleaning and does not have enough time to drain, it may not be able to surface automatically as intended. Please continue to let the robot drain for 2-3 minutes.
Tips
- If this is your first time using the pool this season, we recommend that you clean it manually first by removing any large debris. After that, you can use the robotic pool cleaner to maintain the cleanliness. This is because if there’s a lot of debris left in the pool during the off-season, using the robot will cause the filter basket to clog more quickly and require more frequent cleaning. Therefore, it’s more convenient to start with manual cleaning.
- Each machine undergoes thorough testing, including underwater testing, before leaving the factory. As a result, there may be some residual water stains, which is normal. Please feel free to use it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>