LeapFrog 80-600950 2-in-1 LeapTop Touch User’s Guide

: August 2, 2024
: LeapFrog

Table of Contents

LeapFrog 80-600950 2-in-1 LeapTop Touch
INTRODUCTION
GETTING STARTED
PRODUCT FEATURES
ACTIVITIES
CARE & MAINTENANCE
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LeapFrog 80-600950 2-in-1 LeapTop Touch

INTRODUCTION

Thank you for purchasing the 2-in-1 LeapTop Touch™! Learning is a tap away! Kids can learn about letters, numbers, music, and more on a laptop that’s made just for them. Open the laptop to see the screen in keyboard mode, then close the laptop and watch the screen magically swivel into tablet mode. Plus, the laptop can be customized to help your child spell their name!

INCLUDED IN THIS PACKAGE

One 2-in-1 LeapTop TouchTM
One parent’s guide

WARNING: All packing materials, such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please keep this parent’s guide as it contains important information.

Unlock the packaging locks:

Rotate the packaging locks 90 degrees counterclockwise.
Pull out the packaging locks and discard them.

GETTING STARTED

BATTERY INSTALLATION

BATTERY NOTICE

Use new alkaline batteries for maximum performance.
Use only batteries of the same or equivalent type as recommended.
Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
Do not use damaged batteries.
Insert batteries with the correct polarity.
Do not short-circuit the battery terminals.
Remove exhausted batteries from the toy.
Remove batteries during long periods of non-use.
Do not dispose of batteries in fire.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the toy before charging (if removable).
Rechargeable batteries are only to be charged under adult supervision.

Low Battery Indicator When the batteries run low, a low battery icon will appear on the screen and the unit will power off. Remove the old batteries and replace with a new set.

PRODUCT FEATURES

On/Off/Volume Control Switch
Slide the On/Off/Volume Control Switch to turn the toy on and select the volume. The screen will light-up when the unit is turned on.
Mode Selector
Choose Letters, Numbers, Messages, Games or Music mode.
A-Z Keyboard with Numbers 1- 10
Kids learn letters and numbers while pretending to work on their laptop.
Flip Screen
Flip the screen open and closed to watch the laptop transform from a laptop to a tablet.
Easy Touch Tablet
In tablet mode, kids can touch the screen to play all new games for each of the five modes.
Paw Button
Press to reply to pretend email or select a melody.
Silly Button
Press to play fun sounds.

ACTIVITIES

Personalized Play
Enter Parent Mode by pressing the letters “P” and “M” while turning on the toy. Follow the instructions to enter or update your child’s name. This name will appear in both Laptop and Tablet Modes, allowing your child to learn to spell their name!
Laptop Mode
Choose from five modes and learn letters and numbers using the keyboard, trade pretend emails with Scout, guess the animal while learning 26 animal facts, and watch Scout dance to musical favorites.
Tablet Mode
Choose from five modes and tap to trade emoticons with Scout, play games with Violet and style her hair, learn numbers while feeding Scout, or tap music notes to keep Scout dancing.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries when the unit is not in use for an extended period of time.
Do not drop the unit on a hard surface and do not expose the unit to excess moisture.

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these steps:

Turn the unit OFF.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit back ON. The unit will now be ready to play again.
If the unit still does not work, replace it with an entire set of new batteries.

Environmental phenomena.

The unit may malfunction if subjected to radio-frequency interference.
It should revert to normal operation when the interference stops.
If not, it may become necessary to turn the power OFF and back ON or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose memory, requiring the user to reset the device by removing and reinstalling the batteries.

IMPORTANT NOTE: If the problem persists, please call our Consumer Services Department at 1-800-701-5327 in the U.S. or email support@leapfrog.com. Creating and developing LeapFrog® products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-3 (B)/NMB-3(B)

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Visit our website for more information about our products, downloads, resources, and more. leapfrog.com For warranty information, please visit leapfrog.com/warranty.

FREQUENTLY ASKED QUESTIONS

What is the LeapFrog 80-600950 2-in-1 LeapTop Touch?

The LeapFrog 80-600950 2-in-1 LeapTop Touch is an educational tablet designed for young children, featuring a touchscreen interface and a 2-in-1 design that can be used as both a laptop and a tablet.

What is the price of the LeapFrog 80-600950 2-in-1 LeapTop Touch?

The LeapFrog 80-600950 2-in-1 LeapTop Touch is priced at $17.63.

What are the dimensions of the LeapFrog 80-600950 2-in-1 LeapTop Touch?

The product dimensions are 1.26 x 10.04 x 6.06 inches.

How much does the LeapFrog 80-600950 2-in-1 LeapTop Touch weigh?

The LeapFrog 80-600950 2-in-1 LeapTop Touch weighs 1.3 pounds.

What is the manufacturer recommended age for the LeapFrog 80-600950 2-in-1 LeapTop Touch?

The LeapFrog 80-600950 2-in-1 LeapTop Touch is recommended for children aged 24 months to 5 years.

What type of battery does the LeapFrog 80-600950 2-in-1 LeapTop Touch require?

The LeapFrog 80-600950 2-in-1 LeapTop Touch requires 1 AAA battery.

Who is the manufacturer of the LeapFrog 80-600950 2-in-1 LeapTop Touch?

The LeapFrog 80-600950 2-in-1 LeapTop Touch is manufactured by V Tech.

What is the warranty period for the LeapFrog 80-600950 2-in-1 LeapTop Touch?

The warranty period for the LeapFrog 80-600950 2-in-1 LeapTop Touch is 3 months.

What are the key features of the LeapFrog 80-600950 2-in-1 LeapTop Touch?

Key features of the LeapFrog 80-600950 2-in-1 LeapTop Touch include its dual- function design as a laptop and tablet, interactive touchscreen, and educational content tailored for young children.

Can additional apps be added to the LeapFrog 80-600950 2-in-1 LeapTop Touch?

The LeapFrog 80-600950 2-in-1 LeapTop Touch is designed with pre-installed content, and typically does not support additional app downloads.

What kind of educational content does the LeapFrog 80-600950 2-in-1 LeapTop Touch provide?

The LeapFrog 80-600950 2-in-1 LeapTop Touch offers educational content that focuses on early learning skills such as basic math, reading, and problem- solving.

How do I reset my LeapFrog 80-600950 2-in-1 LeapTop Touch if it’s not responding?

To reset the LeapFrog 80-600950 2-in-1 LeapTop Touch, turn it off, remove the batteries, wait for about 10 seconds, and then reinsert the batteries. Turn the device back on to see if it resolves the issue.

Why is the screen on my LeapFrog 80-600950 2-in-1 LeapTop Touch not turning on?

Ensure the LeapFrog 80-600950 2-in-1 LeapTop Touch has fresh batteries installed. If the problem persists, try replacing the batteries with new ones. Check for any signs of battery corrosion in the compartment.

What should I do if the buttons on my LeapFrog 80-600950 2-in-1 LeapTop Touch are not working?

Check if the buttons on the LeapFrog 80-600950 2-in-1 LeapTop Touch are stuck or dirty. Gently clean around the buttons with a soft cloth. If the issue continues, try performing a reset as described in the first question.

How can I fix the sound issue on my LeapFrog 80-600950 2-in-1 LeapTop Touch?

Verify that the volume is not set to the lowest setting on the LeapFrog 80-600950 2-in-1 LeapTop Touch. If the sound is still not working, check the batteries and replace them if necessary. Reset the device if needed.