Ruijie Networks RG-RAP1260 Dual-Band Wall Plate Access Point User Manual
- June 13, 2024
- Ruijie Networks
Table of Contents
Ruijie Networks RG-RAP1260 Dual-Band Wall Plate Access Point
User Manual
Package Contents
| Item | Quantity |
|---|---|
| RG-RAP1260 Access Point (Including a Cover) | 1 |
| User Manual | 1 |
| Warranty Card | 1 |
| Mounting Bracket | 1 |
| T-Key to Security Lock | 1 |
| M4 x 25 mm Screws | 4 |
Appearance and Ports
- LAN Port
- WAN/PoE Port
The access point adopts PoE power supply. Connect the WAN/PoE port of the access point to a PoE-capable switch or other power source equipment with an Ethernet cable.
Hardware Specifications
| Specifications | Description |
|---|
Dimensions (W
X DX H)
| 124 mm x 86 mm x 24 mm (4.88 in. x 3.39 in. x 0.94 in., the
height refers to the distance from the wall because the mounting bracket is installed on the junction box.)
Weight| 0.5 kg (1.1 lbs)
Data Rate| 2.4 GHz: 574 Mbps 5 GHz: 2402 Mbps
Combined: 2976 Mbps
Operating Bands| 802.11b/g/n/ax: 2.4 GHz to 2.4835 GHz
802.11a/n/ac/ax: 5.150 GHz to 5.350 GHz, 5.470 GHz to 5.725
GHz, 5.725 GHz to 5.850 GHz
Antenna| Built-in omnidirectional antenna
Service Ports
| One 10/100/1000Base-T Ethernet uplink port, supporting PoE input
Four 10/100/1000Base-T Ethernet downlink ports
Restart/restore e to Factory Settings| ****
Supported
Status LED| One white LED
Power Supply| IEEE 802.3af/at-compliant PoE
Max Power Consumption| 12 W
Environment
| Operating temperature: 0°C to 40°C (32°F to 104°F)
Operating humidity: 5% to 95% (non-condensing)
Storage temperature: -40°C to +70°C (-40°F to +158°F)
Storage humidity: 5% to 95% (non-condensing)
Color| White, black, gold, gray, silver, and rose gold
LED and Button
LED
| Status| Description
---|---|---
Off| The access point is not receiving power.
Slow blinking (at
0.5 Hz)
| The access point is operating but an alarm occurs.
Fast blinking (at 2 Hz)
| Possible cases:
• Restoring the access point to factory settings.
• Upgrading the firmware.
• Handling alarms automatically.
• Starting up the access point.
Solid white| The access point is operating normally without alarms.
Reset Button| Press the button for| Restart the access point.
| less than 2 seconds|
---|---|---
Press the button for
more than 5 seconds
| ****
Restore the access point to factory settings.
Tools
(Customer-supplied)
Phillips Screwdriver
Installing the Access Point
The access point can be installed on various junction boxes, including
Chinese-standard and European-standard 86-mm junction boxes, American-standard
118-mm junction boxes, and South African-standard 120-mm junction boxes. To
mount the access point on a Chinese-standard 86-mm junction box, follow these
steps:
Secure the mounting bracket to the junction box using screws. Chinese-standard 86 mm x 86 mm Junction Box
Note: The following are brackets on the European-standard 86 mm x 86 mm
junction box, American-standard 108 mm x 59 mm junction box, and South
African-standard 114 mm x 114 mm junction box. The access point can be mounted
horizontally or vertically on a South African-standard junction box.
Align the upper edge of the WAN port on the access point with the upper edge
of the hole on the mounting bracket. Slide the device downward to secure it on
the mounting bracket.
Note: Keep the key to the security lock (T-key) after installation. This product is designed with an anti-theft function. You need to use the T-key to remove the access point.
Removing the Access Point
- Remove the cover horizontally from the access point.
- Insert the T-key into the square hole on the top of the access point. Push the device upward to remove it from the mounting bracket.
Configuring the Access point
Method 1: Scan QR code for configuration Scan the QR code in the manual or on
the device to download Ruijie Cloud App. Find the First time use Ruijie Cloud?
on the App. Follow the guide on the App to configure the network.
Method 2: Log in to the Web management system for configuration
- Connect the access point to the SSID. If multiple devices exist on the network, use SSID @Ruijie-mXXXX. If only one device exists on the network, use SSID @Ruijie-sXXXX. You can also create a wired connection by connecting your PC to the LAN port of the access point with an Ethernet cable.
- Access http:/110.44.77.253 by browser. You are advised to configure the IP address of the PC as 10.44.77.250.
- Click Start Setup to create network projects.
Caution
The access point has no default password. A password is not required at your
first login. To ensure device security, set a password after login and change
the password regularly.