thermotec 2024 Nu Wave Base User Guide
- August 3, 2024
- ThermoTec
Table of Contents
thermotec 2024 Nu Wave Base
Product Specifications
- Product Name: NuWave(TM) Base acoustic barrier
- Material: Thermotec
- Recommended Safety Equipment: Protective goggles, gloves
Product Usage Instructions
- Step 1: Measure the distance from the floor to ceiling.
- Step 2: Cut NuWave(TM) Base to size using a straight blade cutting tool with a t-square for straight cuts.
- Step 3: Place the first length of NuWave(TM) Base against the ceiling, allowing it to drape evenly to the floor.Secure it in place with screws, nails, or staples.
- Step 4: Use the cutting tool to carefully cut around outlet boxes as they get covered. Ensure a tight and close fit for a good seal.
- Step 5: Install plasterboard over the NuWave(TM) Base. Caulk the seams with an acoustic sealant for best results before finishing and painting your walls.
Frequently Asked Questions (FAQ):
Can I install NuWave(TM) Base without wearing safety equipment?
For your health and safety, it is highly recommended to wear protective goggles and gloves during installation.
What type of tool should I use to cut the NuWave(TM) Base?
Use a straight blade cutting tool along with a t-square to ensure straight cuts.
How should I secure the NuWave(TM) Base in place?
You can use screws, nails, or staples to secure the NuWave(TM) Base against the ceiling and floor.
Do I need to caulk the seams after installing the plasterboard over NuWave(TM) Base?
Yes, caulking the seams with an acoustic sealant is recommended for best results before finishing and painting your walls.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>