Baninni LUIZ BNST034 Duo Stroller Instruction Manual

: August 7, 2024
: Baninni

Table of Contents

LUIZ BNST034 Duo Stroller
Warning
Care
Warranty
Parts
Use
Documents / Resources

LUIZ Manual
DUO STROLLERBNST034
EN 1888-2:2018+A1:2022

LUIZ BNST034 Duo Stroller

Warning: This product must only be assembled by adults. Keep the unassembled components out of the reach of children. To assemble, please refer to the diagram, checking that each component is assembled correctly. Read all instructions before assembly and use. Keep instructions for future use.

Warning

Read these instructions carefully before assembly and use and keep them for future reference. The child could be hurt if you do not follow these instructions.
– Before use, remove plastic bags and other packaging (e.g. fasteners, fastening straps, etc.) and keep them out of the reach of children.
– This stroller is intended for t wo children from bir th (0 months) and up to a maximum weight of 22 kg or a maximum age of 3 years, whichever comes first.
– Never leave the child unattended.
– Make sure all latches are locked before use.
– To avoid injur y, keep your child away when unfolding and folding this product.
– Do not let your child play with this product.
– Always use the harness.
– This product is not suitable for running or skating.
– Use the sleeping position for newborn babies.
– The seated position is not suitable for children under 6 months.
– Any load attached to the handle will affect the stability of the stroller.
– Your child’s safety is your responsibility.
– Do not let children play with or hang on the stroller.
– Do not overload this stroller with extra children, goods or accessories.
– Bags and other objects should not be hung on the handle, as this may affect the stability of the stroller.
– Overloading, folding incorrectly and using non-approved accessories is unsafe and may damage or break this stroller.
– Do not use parts or accessories not approved by the manufacturer.
– Always use the parking brake when the stroller is stationary.
– Make sure that the parking brake is applied when loading and unloading the child.
– Do not let your child climb into the stroller.
– Never leave a rain cover, hood or apron indoors, in a hot environment or near a heat source, as your child may overheat.
– Be careful when going up or down curbs.
– Remove your child and fold the stroller when going up or down the escalator.
– If your stroller is being used by someone unfamiliar with it, for example grandparents, always show them how it works.
– Do not use this stroller near open fire or flames.
– Be careful in windy conditions.
– The basket can carry up to 3 kg of items evenly distributed.
– This product complies with EN 1888-1: 2018, EN 1888-2: 2018

Care

– The product requires regular maintenance to ensure correct and safe operation.
– Regularly check the wheels, locks, brakes, harness, latches, seat adjustments, joints and fastenings to ensure they are clean, working correctly and in full working order.
– Replace tyres if they are excessively worn.
– Do not use this product if any part is broken, cracked or missing, and only use spare parts supplied by the manufacturer.
– If parts become stiff or difficult to operate, check that dirt is not the cause. Try a light application of a silicone lubricant, making sure it penetrates between parts. Regular lubrication of moving parts extends the life of your product and facilitates opening and folding.
– After exposure to humid conditions, dry with a soft cloth and leave fully open in a warm environment. Damp storage promotes mould growth.
– If the frame is exposed to salt water, we recommend rinsing it as soon as possible and cleaning it afterwards with a sponge and soapy water.
– Store in a dr y place.
– Do not leave in sunlight for long periods as some fabrics may discolour.
– Clean the fabrics with a mild detergent using a sponge.
– Use mild soap or upholstery shampoo.
– Washing instructions:

Warranty

This is the legal guarantee. Damage caused by the use of force or poor maintenance or normal wear and tear will void the warranty.
Contact your point of sale for more information about the guarantee.

Parts

Push bar
Sun canopy
Sun visor
Shoulder straps
5-point harness
Front bar
Footrest adjustment button
Release button front bracket
Front wheel
Frame folding button
Adjustment button seat position
Front wheel lock button
Brake/ lock button rear wheel
Rear wheel
Basket
Adjustment buckle seat to sleeping position
Adjustment button handle

Use

1. Opening the stroller
Take the front handle and lift it up until the frame is fully unfolded. Attention:
Make sure all latches are engaged before use. 2. Attaching and detaching seat
2.1 To attach the seat, slide both guides downwards until they click into position.
2.2 To fix the seat, push the button on both sides and pull the seat up. 3. Front wheels
3.1 Inser t the front wheel into the tube of the frame until you hear a click.
3.2 To remove the front wheel, push the button and pull the wheel.
3.3 To lock the front wheels, slide the lock button down. To rotate the front wheels, slide the lock button up. 4. Rear wheels
4.1 Insert the rear wheel into the frame tube until it is fully engaged.
4.2 To remove the rear wheel, press the button and pull the wheel.
4.3 To lock the rear wheels, push the brake pedal down and push the stroller for ward until the rear wheel sare locked. To unlock the rear wheels, push the brake pedal upwards. 5. Front bar
5.1 To attach the front bar, insert the front bar into the openings on the seat until the front brace clicks into place.
5.2 To remove the front bar, press the release button on both sides and pull the front bar. 6. Sun canopy
6.1 To fit the sun canopy, click the sun canopy onto the frame.
6.2 Then fasten the sun canopy with the zip.
6.3 To open the canopy, pull the front of the canopy until fully opened. To close the hood, pull the hood back. 7. Push bar
You can adjust the height of the handlebar by pushing the adjustment button and sliding the handlebar to the desired height. The push bar gives a click when it is in the correct position. 8. Footrest
You can adjust the footrest by pushing the adjustment button on either side and til ting the footrest down or up. 9. 5-point harness
To buckle your child in with the 5-point harness, follow these steps.
9.1 Place your child in the stroller, with the crotch strap between their legs.
Bring the clips together, slide the right clip into the right buckle until you hear a click.
9.2 Slide the left clip into the left buckle until you hear a click.
9.3 After the 5-point harness has clicked into place, adjust the waist belt and shoulder straps so that your child sits securely in the stroller.
9.4 To release the 5-point belt, click the release button in the middle of the belt. 10. Different seat positions
The seats can be placed in different positions.
10.1 To tilt the seats, press the seat button on both sides and tilt the seat to the desired position. Sleeping position

To convert the seat to the sleeping position, fully tilt the seat and loosen the buckles to push the seat fabric down. Note: for this position, you need to remove the harness belt.
You can also use the stroller for 2 seats. You also have different positions available for the 2 seats. To use the 2 seats, you need to install the adapters.
After installing the adapters, you can slide the seats into the adapters.
10.2 To install the front seat adapter, insert the adapters on both sides into the hinge points until you hear a click. To remove the front seat adapter, place your finger on the adapter’s clamping point and slide the adapter out of the frame.
10.3 To install the rear seat adapter, insert the adapters on both sides into the hinge points until you hear a click. To remove the rear seat adapter, place your finger on the adapter’s clamping point and slide the adapter out of the frame. 11. Collapsing the stroller
11.1 Apply the brake.
11.2 Press the adjustment button on the handlebar and slide the handlebar to the lowest posi tion.

11.3 Press the release button on both sides and pull the seat to remove the seat. Do you use the stroller in duo position? Then remove the seats and adapters.
11.4 Stand at the front of the stroller and press the folding buttons on both sides of the frame. 11.5 Push the stroller down in the direction of the arrow.
11.6 Push the stroller down as far as possible. 12.Car seat
12.1 Put the stroller adapters onto the stroller.
12.2 Click the car seat adapters onto the car seat.
12.3 Place the car seat with adapters on the frame of the stroller. You can combine the car seat on the stroller with a seat unit, or attach 2 car seats to the stroller.

Voortstraat 12
2490 Balen
Belgium
+ 32 14 81 44 81
info@baninni.com
www.baninni.com

Documents / Resources

| Baninni LUIZ BNST034 Duo Stroller [pdf] Instruction Manual
BNST034, LUIZ BNST034 Duo Stroller, LUIZ BNST034, LUIZ Stroller, BNST034 Stroller, Duo Stroller, LUIZ, Stroller
---|---