Baninni ZOLA Car Seat Instruction Manual
- July 15, 2024
- Baninni
Table of Contents
Baninni ZOLA Car Seat
Product Information
Specifications
- Model: ZOLA i-Size Booster Seat
- Regulation: UN Regulation No.129/03
- Age Range: 3 to 12 years
- Height Range: 100cm to 150cm
- Weight Range: 15kg to 36kg
Product Usage Instructions
Parts
- Guide groove of the headrest
- Headrest
- ISOFIX attachment
- ISOFIX release button
Use
Install the carseat in the vehicle
Only suitable if the approved vehicles are fitted with 3 point
safety belt, approved to UN/ECE Regulation No. 16 or other equivalent
standards.
Proper installation
Improper installation
Not to use in seating positions where an active frontal airbag is installed.
Only use on this seat if ISOFIX anchorages are fitted.
Adjusting the Headrest
To adjust the headrest, press the blue button on the backrest and pull on the
groove at the back of the headrest. The headrest has 8 adjustable positions
based on the child’s height. Press and hold the blue button on the backrest
and pull the groove on the back of the headrest. The headrest has 8 gears
which can be adjusted depending on the child’s height.
Adjust the ISOFIX attachments
The ISOFIX attachments can be adjusted for many positions to fit the different
positions of ISOFIX anchorages. Press down the release button to adjust the
ISOFIX attachment of both sides to the longest. Then put the ISOFIX
attachments into guide sleeves and insert them into ISOFIX anchorages. Make
sure that you have heard a “click” and the ISOFIX latching indication shows a
green colour. lf you want to release the ISOFIX attachments, push the red
release button of the ISOFIX chuck at the direction as shown, the ISOFIX chuck
will be released. After installed the ISOFIX chuck, push the child restraint
forwards until it is tight against the car seat. Now, the ISOFIX base is
installed into place.
Installation Options
Option 1: ISOFIX + Three-Point Seatbelt
Place the safety seat on the car seat and make sure that the safety seat is
fixed onto the ISOFIX anchorages in the car. When you hear a “click” and the
ISOFIX latching indication shows a green colour, then the safety seat is
correctly positioned in the car seat. Then place your child in the safety
seat. Insert the car seat belt across the child’s body into the car groove of
the car seat. Make sure that the car seat shoulder belt passes through the
guide groove of the headrest, and pull up the car seat lap belt to check
whether it’s locked.
- Place the car seat on the vehicle seat.
- Secure your child in the car seat.
- Route the car belt over the child’s body in the seat’s notch.
- Ensure the shoulder belt runs through the headrest’s guiding groove and pull up the lap belt to check for locking.
Option 2: Three-Point Seatbelt
Place the safety seat on the car seat, then place your child in the safety
seat. Insert the car seat belt across the child’s body into the car groove of
the car seat. Make sure that the car seat shoulder belt passes through the
guide groove of the headrest, and pull up the car seat lap belt to check
whether it’s locked.
- Make sure the belt runs under the seat’s belt guide.
- Avoid obstructing the car seat’s head contact point with the belt.
- Ensure the car seat is as close as possible to the vehicle’s backrest.
Make sure the belt runs under the seat belt guide.
Make sure when you’re using the car 3-point-belt, that the belt doesn’t interfere with the main load-bearing contact point of the carseat.
Make sure that with both options the safety seat is positioned as closely as possible to the back of the car seat.
Care
- In daily use, check periodically the child seat. The child seat should be replaced after an accident.
- Please keep this child seat in dry and ventilated place to avoid damp moldy.
- If the child seat becomes dusty, clean the seat belt and the plastic pieces by swiping them with a damp sponge and let it dry naturally.
- If food or drink drop accidently on the buckle, disassemble the seat belt from the child seat and rinse it gently by warm water. Leave it to dry naturally.
- For cleaning the entire child seat fabric cover, please follow the next washing instructions: Never use any solvant, chemical detergent or lubricant on any part of your child seat.
Maintenance
Refer to the user manual for maintenance instructions to ensure product
longevity and safety.
Warranty
The product comes with statutory warranty coverage. Damage resulting from
misuse, violence, inadequate maintenance, or normal wear and tear voids the
warranty. Contact your point of sale for warranty details. This is the legal
guarantee. Damage caused by the use of force or poor maintenance or normal
wear and tear will void the warranty. Contact your point of sale for more
information about the guarantee. For your child’s safety, please read these
instructions carefully before use and keep them for future reference. Failure
to follow the instructions in this manual may result in serious injury to your
child.
- This product can be used forward-facing for children 100-150 cm tall, weighing 15-36 kg and aged 3-12 years. This can only be done when using the adult three-point belt with ISOFIX, or when using only the adult threepoint belt during car seat attachment.
- Do not use carrying contact points other than those described in the instructions and marked in the child seat when within 100-150 cm.
- Do not use this car seat at home. It is not designed for home use and should only be used in the car.
- For safety reasons, the car seat must be secured in the car with ISOFIX anchorages, even if you do not place your child in the car seat.
- The rigid parts and plastic parts of a child restraint must be located and installed so that they cannot become trapped between a movable seat or in a car door during normal use of the car.
- The straps securing the restraint to the vehicle must be tight.
- The straps used to hold the child shall be adapted to the child’s body. The straps must not be twisted.
- Ensure that a lap belt is worn low so that the pelvis is securely fastened.
- The car seat should be replaced if it has been subjected to severe stress during an accident.
- It is dangerous to make changes or additions to the device without approval from the type approval authority, it is also dangerous not to follow the manufacturer’s instructions carefully.
- If the car seat does not have a fabric cover, the seat should be kept away from sunlight, otherwise it may become too hot for the child’s skin.
- Do not leave your child unattended in the car seat.
- Luggage or other objects that could cause injury in a collision should be properly secured.
- Do not replace the cover with any other than the cover recommended by the manufacturer, as the cover is an integral part of the restraint system.
- The car seat must not be used without the cover.
- Before adjusting movable or adjustable parts of your car seat, remove your baby from the car seat.
- Never use a second-hand product, as you can never be sure what happened to it.
- Always check that the three-point adult seat belt is always correctly fastened in the car seat and in the car.
- Before purchasing, check that the car seat is compatible with your car. If in doubt, contact the car seat manufacturer.
FAQ
Q: Can I use a second-hand ZOLA i-Size Booster Seat?
A: It is recommended not to use second-hand products as their history and
condition are unknown, potentially compromising safety.
Q: How can I ensure the three-point adult seat belt is correctly
fastened?
A: Always double-check that the adult seat belt is properly secured both in
the car seat and in the vehicle to ensure optimal safety.
Q: How do I verify if the ZOLA i-Size Booster Seat is compatible with my
car before purchase?
A: Before buying, confirm compatibility by checking with the car seat
manufacturer to ensure a suitable fit for your specific vehicle model.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>