DUALTRON Forever Personal Mobility Electric Scooter User Manual

Table of Contents

Specifications

Assembly

To assemble the product, follow these steps:

How to Ride

Power on the scooter and choose the speed mode via the Dualtron app.
Stand on the footboard with one foot and push off with the other foot to start gliding.
Put both feet on the footboard and stand stably.
Pull the throttle to speed up.
Slow down by releasing the throttle and squeezing the brake levers.
To turn, shift your body and turn the handlebar slightly.
Always maintain a moderate speed and watch out for potential hazards.

Folding

Loosen the QR lever and push the locking slider inward to fold the handlebars down.
Hold the steering tube with your hand to prevent it from falling and hitting.
Lay the steering tube down while raising the locking slide.
Lock the handlebar hook to the folding bracket before lifting the scooter.

Handlebar Functions

Disclaimer: This is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purposes only. It is not intended to cover every piece of law and/or regulation that may apply to this product. DUALTRON explicitly and hereby disclaims any warranty and/or representation, express or implied, related to the completeness, accuracy, and up-to-date of such information. DUALTRON reserves the right but not the obligation to correct, implement, and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any the laws and/or regulations, requirements, prohibitions, restrictions, and/or limitations imposed by either law, government authority, court, private party, or the others that may apply to your use of this product.
Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that aﬀect range include speed, number of starts and stops, ambient temperature, etc. )
Max.Speed: tested while riding with a full battery,75kg load,25°C, straight road on ﬂat road with no wind. (Some environmental factors can aﬀect max speed, uneven roads, crooked roads, temperature, wind, etc.)

Accessories

APP Download Guide

Pair the Bluetooth on the APP

Power on the scooter.

Click “Search vehicle” and pair it with your scooter. * The scooter is connected to the Dualtron app when the Bluetooth symbol lights up.
Select “bind as owner”.
(No one else can connect, only people authorized by you are allowed to connect. Authorizations are created on the app.)

Release the QR lever, raise the locking slide upwards, raise the steering tube, then lower the locking slide downward.
Tighten the finishing screw properly to lock the QR lever so that the locking slide is firmly fixed in any direction, and check for looseness during use.
Loosen the QR lever, pull the locking slide inward, and raise the handlebar, then close the QR lever and tighten the set screw.
Align the locking slide with the safety line and lock it so that it is firmly fixed with the QR lever. Always check for looseness during use.

Power on the scooter and choose the speed mode. * Please choose the speed mode before riding!
Note : Speed mode can be chosen via the Dualtron app.
Stand on the footboard with one foot and push off with the other foot to start gliding. *Make sure you have disabled SAFE mode. (SAFE mode setting via Dualtron app.Deactivate safe mode by squeezing the brake lever.)
Put both feet on the footboard and stand stably. Pull the throttle to speed up.
Slow down by releasing the throttle and squeezing the brake levers.
To turn, shift your body and turn the handlebar slightly.
Please watch out for road conditions, sufficient turning space is required.
WARNING: When hard braking, danger or injury may occur. Maintain a moderate speed and look out for potential hazards.

Loosen the QR lever, push the locking slider inward, and fold the handlebars down.
Loosen the QR lever and move the locking slide upward.
WARNING: You must hold the steering tube with your hand to prevent falling and hitting
Lay the steering tube down while raising the locking slide.
Lock the handlebar hook to the folding bracket.
WARNING: Ensure that the handlebar when lifting the scooter.

SCANNER

Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions.

Q: How do I pair the Bluetooth on the APP?
- A: You can pair the Bluetooth on the APP by following these steps:
- Search for DUALTRON in the application and download it.
- Register or log in to the app.
- Power on the scooter and click on “Search vehicle” on the app.
- Pair your scooter with the app; the Bluetooth symbol will light up when connected.
- Select “bind as owner” to authorize connections only by authorized users.
Q: How do I deactivate SAFE mode?
- A: You can deactivate SAFE mode by squeezing the brake lever. Ensure you have disabled SAFE mode before riding by using the Dualtron app.