Spider Max Double Motors Dualtron User Manual
- May 15, 2024
- DUALTRON
Table of Contents
spider – max
Personal Mobility
PRODUCT MANUAL
Spider Max Double Motors Dualtron
https://www.dual-tron.com/download.html
Scan the QR code to download the latest user materials and obtain the latest
updates and safety instructions.
DUALTRON
The dream of electric technology.
The pictures shown are for illustration purposes only. Actual product may
vary.
Diagram And Functions
Name| Function|
Operation method
---|---|---
| Turn on/ off headlight| Press the light button,turn on/off the
headlight.
| Turn on/off the left/right signal| Press the left/right side of the Turn
Signal Button, the left/right turn signal will keep blinking.
| Turn on the horn| Press the Horn Button, the scooter will beep once.
**** Accelerator
| Speed up| Pull the throttle to accelerate.
Specifications
| Item| Parameter
---|---|---
Product| Model| DUALTRON SPIDER-MAX
Length × Width × Height| 1140x620x1250mm
Folded: Length × Width × Height| 1140x220x510mm
Net Weight| 31.5kg
Rider| Max. load| 120kg
Recommended Age| 14–60 years old
Machine| Wheelbase| Approx.900mm
Ground Clearance| Approx.180mm
Drive System| Two-wheel drive
Max. Speed| 80km/h
Max. Slope| Around 43%(23°)
Traversable Terrain| Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm
Operating Temperature| -5 to 45°C
Storage Temperature| -20 to 50°C
Dispaly| Type| EY4 LCD Bluetooth Display(Ability to connect to DUALTRON APP)
Size Of LCD| 9536mm, about 4.2 inches
Brake| Type| Hydraulic brake (140mm disc)
Electric Brake| ABS/EBS
Battery| Battery Capacity| 60V30Ah LG / 60V24Ah
Range| Around 100km / 85km
Duration of Charging| 17hr / 13hr
Charging Ambient Temperature| 0 to 40°C (Battery temperature exceeds 55°C,BMS
start protection program.)
Battery Management System| Over-heating, short circuit, over-current, over-
discharge and over-charge protection
Motor| Motor Type| BLDC Hub Motor
Nominal Power| 1000W2
Max. Power| 2000W2
Charger| Input Voltage| 100-120V/200-240V~
Max. Output Voltage| 66.4V1.75A (Fast charger 66.4V6.5A is optional)
Tire| Type| 102.5 tube tire
Tire Pressure| 50 psi
Material| Rubber
Suspension| Type| Rubber suspesnsion(front)+replaceable
suspension(rear,cartridge design)
Optional| Softest (Front) Medium soft (Rear) Medium Medium hard Hardest
Note Change the thickness of the gasket to obtain different shock
absorption effects.
Disclaimer: this is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purpose only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. DUALTRON explicitly hereby disclaims any and all warranty and/or representation, express or implied, related to completeness, accuracy, up-to-date of such information. DUALTRON reserves the right but not obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all the law and/or regulation, requirements, prohibition, restriction and/or limitation imposed by either law, government authority, court, private party or the others that may apply to your use of this product.
Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc. )
*Max.Speed: tested while riding with a full battery,75kg load,25°C,straight road on flat road with no wind. (Some environmental factors can affect max speed,uneven roads, crooked
Packing List
Assembly
- Unlock the steering tube from folding hook.
- Raise the steering tube,move the locking slide downward.
- Tighten the finishing screw properly to lock the wide QR lever firmly.
- Move the locking slide of handlebar inward and raise the handles.
- Close the QR lever and tighten it.
Bluetooth Connection
APP Download Guide
https://www.dual-tron.com/app.html
- Scan the QR code to download the APP.
- Choose the mobile phone system that suits you to install,and register / log in.
- Search “DUALTRON” in the application and download it, and register / log in.
Power on the scooter. Click “Search vehicle” and pair with your scooter. * The scooter is connected to the Dualtron app when the Bluetooth symbol lights up. Select bind as owner
How to Ride
- power on the scooter and choose the speed mode. * Please choose the speed mode before riding! Note:Speed mode can be choose via the Dualtron app.
- stand on the footboard with one foot and push off with the other foot to start gliding.
*Make sure you have disabled SAFE mode.(SAFE mode setting via Dualtron app Deactivate safe mode by squeezing brake lever.) - put both feet on the footboard and stand stably. Pull the throttle to speed up. * This scooter starts at an initial speed of 0 km/h. Note: Disable the Zero start-up feature via the Dualtron app. When disabled, the motor will not engage until the scooter reaches 1.9 mph (3 km/h).
- Slow down by releasing the throttle and squeezing brake levers.
- To turn, shift your body and turn the handlebar slightly.
Please watch out for road conditions,sufficient turning space is required. When hard braking, serious danger or injury may occur. Maintain a moderate speed and look out for potential hazards.
Folding
Release the QR lever of handlebar, move the locking slide inward and fold the handles.Release the wide QR lever, raise the locking slide upwards.Fold the steering post,lock the steering tube to the deck. Lift up the bottom of the front fork and rear foot pedestal to carry if necessary. Make sure the scooter is carried by two or more people. Risk of pinching!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>