DUALTRON 2023 Spider 2 Electric Scooter Instruction Manual

DUALTRON 2023 Spider 2 Electric Scooter

Product Information

• Specifications
  • Product: Dualtron Spider 2
  • Battery: 60V24Ah CN / 60V30Ah (LG or Samsung)
  • Rider Display: New EY3 display (DUALTRON APP available)
  • Motor: BLDC Hub Motor, 1100W, Dual motor drive
  • Weight: 26.2kg
  • Maximum Speed: 25km/h
  • Dimensions: 1140x605x1240mm
  • Tyre Type: 10-inch tube tyre
  • Suspension: Rubber suspension (front) + replaceable suspension (rear, cartridge design)
  • Brake Type: Hydraulic brake
  • Charger Input Voltage: 100-120V/200-240V~
  • Tire Pressure: 50 psi

Product Usage Instructions

• Assembly
  • To assemble the scooter:
  • Release the QR lever and raise the locking slide upwards.
  • Raise the steering tube.
  • Lower the locking slide downward.
  • Tighten the finishing screw properly to lock the QR lever in place.
  • Check for any looseness during use.
• Attaching Handlebar
  • To attach the handlebar:
  • Tighten the 4 screws in a specific order (1-4-2-3).
  • The first step screw should be tightened diagonally to 90% tightness.
  • In the second step, tighten all screws to 100% tightness.
• How to Ride
  • Power on the scooter and choose the speed mode via the Dualtron app.
  • Stand on the footboard with one foot and push off with the other foot to start gliding.
  • Put both feet on the footboard and stand stably.
  • Pull the throttle to speed up.
  • Slow down by releasing the throttle and squeezing the brake levers.
  • To turn, shift your body and turn the handlebar slightly.

FAQs

• Q: How do I pair my scooter with the Dualtron app via Bluetooth?
  • A: Follow these steps:
  • Power on the scooter and open the Dualtron app on your mobile phone.
  • Select “Search vehicle” within the app.
  • Pair your scooter with the app by following the on-screen instructions.
  • The Bluetooth symbol will light up once connected successfully.
• Q: How do I deactivate SAFE mode on my scooter?
  • A: To deactivate SAFE mode, squeeze the brake lever while in the Dualtron app settings.

Diagram And Functions

Specifications

start protection program.)
Battery Management System| Over-heating, short circuit, over-current, over- discharge and over-charge protection
Rider| Max. load| 120kg
Recommended Age| 14–60 years old
Display| Type| New EY3 display(DUALTRON APP available)
Motor| Motor Type| BLDC Hub Motor
Nominal Power| 1100W
Machine| Net Weight| 26.2kg
Max. Slope| Around 43%[23°]
Drive System| Dual motor drive
Speed| 25km/h
Length × Width × Height| 1140x605x1240mm
Folded: Length × Width × Height| 1140x605x500mm
Wheelbase| Approx.870mm
Ground Clearance| Approx.160mm
Traversable Terrain| Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm
Operating Temperature| -5 to 45°C
Storage Temperature| -20 to 50°C

• Disclaimer: This is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purposes only. It is not intended to cover every piece of law and/or regulation that may apply to this product. DUALTRON explicitly and hereby disclaims any warranty and/or representation, express or implied, related to the completeness, accuracy, and up-to-date of such information. DUALTRON reserves the right but not the obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand all the laws and/or regulations, requirements, prohibitions, restrictions and/or limitations imposed by either law, government authority, court, private party or the others that may apply to your use of this product.
• Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
• Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc. )
• Max.Speed: tested while riding with a full battery,75kg load,25°C, straight road on a flat road with no wind. (Some environmental factors can affect max speed, uneven roads, crooked roads, temperature, wind, etc.)

Packing List

Bluetooth Connection

APP Download Guide

1. Scan the QR code to download the APP.

2. Choose the mobile phone system that suits you to install, and register/log in.

3. Search “DUALTRON” in the application download it, and register/log in.

Pair the Bluetooth on the APP

1. Power on the scooter.
2. Click “Search vehicle” and pair it with your scooter. * The scooter is connected to the Dualtron app when the Bluetooth symbol lights up.
3. Select “bind as owner”. (No one else can connect, only people authorized by you are allowed to connect. Authorizations are created on the app.)

Assembly

1. Release the QR lever, raise the locking slide upwards, raise the steering tube, and then lower the locking slide downward.
2. Tighten the finishing screw properly to lock the QR lever so that the locking slide is firmly fixed in any direction, and check for looseness during use.
3. Attach the handlebar body and tighten the 4 screws. (When tightening the screw, the first step screw is 90% tight, you must tighten it diagonally, according to the order 1-4-2-3; In The second step all screws are 100% tightened.)

How to Ride

1. Power on the scooter and choose the speed mode. * Please choose the speed mode before riding!
   • Note: Speed mode can be chosen via the Dualtron app.
2. Stand on the footboard with one foot and push off with the other foot to start gliding. *Make sure you have disabled SAFE mode. (SAFE mode setting via Dualtron app.Deactivate safe mode by squeezing brake lever.)
3. Put both feet on the footboard and stand stably. Pull the throttle to speed up.
4. Slow down by releasing the throttle and squeezing the brake levers.
5. To turn, shift your body and turn the handlebar slightly. Please watch out for road conditions, sufficient turning space is required.
6. When hard braking, danger or injury may occur. Maintain a moderate speed and look out for potential hazards.

Folding

1. Loosen the QR lever and move the locking slide upward. You must hold the steering tube with your hand to prevent falling down and hitting.
2. Lay the steering tube down while raising the locking slide.

• Lock the handlebar hook to the footrest. Ensure that the handlebar is when lifting the scooter.

Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions. Pictures for reference only, subject to our existing products.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>