DUALTRON 60V35Ah Achilleus Electric Scooter Instruction Manual
- May 15, 2024
- DUALTRON
Table of Contents
DUALTRON 60V35Ah Achilleus Electric Scooter
Product Information
- Specifications
- Product: Dualtron Achilleus
- Battery: 60V28Ah CN / 60V35Ah (LG or Samsung)
- Rider: 95km / 120km
- Display: EY4 LCD Bluetooth Display
- Motor: BLDC Hub Motor, 1400W*2
- Weight: 41.7kg
- Drive: Single/Dual drive
- Speed: 25km/h
- Dimensions: 1270x620x1310mm
- Tyre: 11-inch tubeless wide tyre
- Suspension: Front & Rear suspension cartridge (replaceable)
- Brake Type: Electric Brake (Hydraulic Brake)
- Charger Input Voltage: 100-120V/200-240V~
- Tire Pressure: 50 psi
- Material: Rubber
Product Usage Instructions
- Assembly
- To assemble the scooter:
- Release the QR lever and raise the locking slide upwards.
- Raise the steering tube and lower the locking slide downward.
- Tighten the finishing screw properly to lock the QR lever in place.
- Check for any looseness during use.
- How to Ride
- Power on the scooter and select the speed mode via the Dualtron app.
- Stand on the footboard with one foot and push off with the other foot to start moving.
- Ensure SAFE mode is disabled (deactivate via the Dualtron app by squeezing the brake lever).
- Put both feet on the footboard, stand stably, and pull the throttle to speed up.
- To slow down, release the throttle and squeeze the brake levers.
- To turn, shift your body and turn the handlebars accordingly.
FAQs
- Q: How can I pair the Bluetooth on the APP?
- A: Power on the scooter, open the Dualtron app, click “Search vehicle,” and pair it with your scooter. The Bluetooth symbol will light up when connected.
- Q: What should I do if I encounter looseness during use?
- A: If you notice any looseness during use, refer to the assembly instructions to ensure all components are securely locked in place.
Diagram And Functions
Specifications
| Item | Parameter | |
|---|---|---|
| Product | Model | Dualtron Achilleus |
Battery
| Battery Capacity| 60V28Ah CN / 60V35Ah (LG or Samsung)
Range| 95km / 120km
Charging Ambient Temperature| 0 to 40°C (Battery temperature exceeds 55°C,BMS
start protection program.)
Battery Management System| Over-heating, short circuit, over-current, over-
discharge and over-charge protection
Rider| Max. load| 120kg
Recommended Age| 14–60 years old
Display| Type| EY4 LCD Bluetooth Display(Ability to connect to DUALTRON
APP)
Motor| Motor Type| BLDC Hub Motor
Nominal Power| 1400W*2
Machine| Net Weight| 41.7kg
Max. Slope| Around 58% (30°)
Drive System| Single/ Dual drive
Speed| 25km/h
Length × Width × Height| 1270x620x1310mm
Folded: Length × Width × Height| 1270x280x580mm
Wheelbase| Approx.980mm
Ground Clearance| Approx.210mm
Traversable Terrain| Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm
Operating Temperature| -5 to 45°C
Storage Temperature| -20 to 50°C
- Disclaimer: This is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purposes only. It is not intended to cover every piece of law and/or regulation that may apply to this product. DUALTRON explicitly and hereby disclaims any warranty and/or representation, express or implied, related to the completeness, accuracy, and up-to-date of such information. DUALTRON reserves the right but not the obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any the law and/or regulation, requirements, prohibitions, restrictions and/or limitations imposed by either law, government authority, court, private party or the others that may apply to your use of this product.
- Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
- Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc. )
- Max.Speed: tested while riding with a full battery,75kg load,25°C, straight road on a flat road with no wind. (Some environmental factors can affect max speed, uneven roads, crooked roads, temperature, wind, etc.)
Packing List
Bluetooth Connection
APP Download Guide
- Scan the QR code to download the APP. Choose the mobile phone system that suits you to install, and register/log in.
- Search “DUALTRON” in the application download it, and register/log in.
Pair the Bluetooth on the APP
- Power on the scooter.
- Click “Search vehicle” and pair it with your scooter. * The scooter is connected to the Dualtron app when the Bluetooth symbol lights up.
- Select “bind as owner”. (No one else can connect, only people authorized by you are allowed to connect. Authorizations are created on the app.)
Assembly
- Release the QR lever, raise the locking slide upwards, raise the steering tube, and then lower the locking slide downward.
- Tighten the finishing screw properly to lock the QR lever so that the locking slide is firmly fixed in any direction, and check for looseness during use.
- Loosen the QR lever, pull the locking slide inward and raise the handlebar, then close the QR lever and tighten the set screw.
- Place the locking slide up to the safety line and lock it so that it is firmly fixed with the QR lever. Always check for looseness during use.
- Place the locking slide up to the safety line and lock it so that it is firmly fixed with the QR lever. Always check for looseness during use.
How to Ride
- Power on the scooter and choose the speed mode. Please choose the speed mode before riding!
- Note: Speed mode can be chosen via the Dualtron app.
- Stand on the footboard with one foot and push off with the other foot to start gliding. Make sure you have disabled SAFE mode. (SAFE mode setting via Dualtron app.Deactivate safe mode by squeezing the brake lever.)
- Put both feet on the footboard and stand stably. Pull the throttle to speed up.
- Slow down by releasing the throttle and squeezing the brake levers.
- To turn, shift your body and turn the handlebar slightly. Please watch out for road conditions, sufficient turning space is required.
- When hard braking, danger or injury may occur. Maintain a moderate speed and look out for potential hazards.
Folding
- Loosen the QR lever, push the locking slider inward and fold the handlebars down.
- Loosen the QR lever and move the locking slide upward. You must hold the steering tube with your hand to prevent falling down and hitting.
- Lay the steering tube down while raising the locking slide.
- Lock the handlebar hook to the footrest. Ensure that the handlebar is when lifting the scooter.
Pictures for reference only, subject to our existing products. Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>