Togo Most Affordable Dualtron E Scooter Instruction Manual
- June 4, 2024
- DUALTRON
Table of Contents
Togo Most Affordable Dualtron E Scooter
Specifications
- Product: Dualtron Togo
- Battery: 36V7.8Ah (Dualtron Togo), 36V12Ah (Dualtron Togo Plus), 36V15Ah (Samsung), 48V12Ah, 48V15Ah (Samsung)
- Rider: 20km (Togo), 30km (Togo Plus), 40km (Samsung), 50km (Samsung)
- Display: EY2 display (DUALTRON APP available)
- Motor: BLDC Hub Motor, 420W (Togo), 650W (Togo Plus)
- Machine Weight: Around 22.8kg – 24.4kg
- Max Load: 100kg
- Speed: 25km/h
- Dimensions: Approx. 940mm x 90mm
- Terrain: Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm
- Brake Type: Dual drum brake
- Charger Input Voltage: 100-120V/200-240V~
- Charger Output Voltage: 36V: 41.5V1.5A, 48V: 54V1.5A
- Tyre Type: 9-inch tyre, Pressure: 50PSI, Material: Rubber
- Suspension: Front & rear spring suspension
Diagram And Functions
Specifications
| Item| Parameter
---|---|---
Product| Model| Dualtron Togo| Dualtron Togo Plus
Battery
| Battery Capacity| 36V7.8Ah| 36V12Ah| 36V15Ah (Samsung)| 48V12Ah| 48V15Ah
(Samsung)
Range| 20km| 30km| 40km| 40km| 50km
Charging Ambient Temperature| 0 to 40°C (Battery temperature exceeds 55°C,BMS
start protection program.)
Battery Management System| Over-heating, short circuit, over-current, over-
discharge and over-charge protection
Rider
| Max. load| 100kg
Recommended Age| 14–60 years old
Display| Type| EY2 display(DUALTRON APP available)
Motor| Motor Type| BLDC Hub Motor
Nominal Power| 420W| 650W
Machine
| Net Weight| Around 22.8kg| Around 23.5kg| Around 23.7kg| Around 24.3kg|
Around 24.4kg
Max. Slope| Around26.8%[ 15°]
Drive System| Single motor drive
Speed| 25km/h
Length × Width × Height| 1200×600×1130mm
Folded: Length × Width × Height| 1160×600×400mm
Wheelbase| Approx.940mm
Ground Clearance| 90mm
Traversable Terrain| Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm
Operating Temperature| -5 to 45°C
Storage Temperature| -20 to 50°C
Brake
| Type| Dual drum brake
---|---|---
Electric Brake| ABS&EBS (Indicating the battery temperature exceeds 55°C, BMS
start protection program, ABS/EBS fails.）
Charger
| Input Voltage| 100-120V/200-240V~
Max. Output Voltage| 36V: 41.5V1.5A| 48V: 54V1.5A
Tire
| Type| 9-inch tire 70/50-6.1
Tire Pressure| 50PSI
Material| Rubber
Suspension| Type| Front&rear spring suspension
Disclaimer: This is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purposes only. It is not intended to cover every piece of law and/or regulation that may apply to this product. DUALTRON explicitly hereby disclaims any warranty and/or representation, express or implied, related to the completeness, accuracy, and up-to-date of such information. DUALTRON reserves the right but not the obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any of the laws and/or regulations, requirements, prohibitions, restrictions and/or limitations imposed by either law, government authority, court, private party or the others that may apply to your use of this product.
- Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
- Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc. )
- Max.Speed: tested while riding with a full battery,75kg load,25°C, straight road on a flat road with no wind. (Some environmental factors can affect max speed, uneven roads, crooked roads, temperature, wind, etc.)
Packing List
Accessories
Assembly
- Pull the index pin outward, then rotate it slightly to ensure a secure fit, the index pin will get stuck and the folding handle will work.
- Raise the steering tube and remember to reinsert the index pin to make this folding system more secure.
- Attach the handlebar body and tighten the 4 screws. (When tightening the screw, the first step screw is 90% tight, according to order 1-3-2-4; in the second step all screws are 100% tightened.)
Bluetooth Connection
APP Download Guide
- Scan the QR code to download the APP.
- Choose the mobile phone system that suits you to install, and register/log in.
Pair the Bluetooth on the APP
-
Power on the scooter.
-
Click “Search vehicle” and pair it with your scooter.
The scooter is connected to the Dualtron app when the Bluetooth symbol lights up. -
Select “bind as owner”.
(No one else can connect, only people authorized by you are allowed to connect. Authorizations are created on the app.)
How to Ride
-
Power on the scooter and choose the speed mode. Please choose the speed mode before riding!
Note: Speed mode can be chosen via the Dualtron app. -
Stand on the footboard with one foot and push off with the other foot to start gliding. Make sure you have disabled SAFE mode.(SAFE mode setting via Dualtron app.Deactivate safe mode by squeezing the brake lever.)
-
Put both feet on the footboard and stand stably. Pull the accelerator to speed up.
-
Slow down by releasing the accelerator and squeezing the brake levers.
-
To turn, shift your body and turn the handlebar slightly.
Please watch out for road conditions, sufficient turning space is required. look out for potential hazards.
Folding
- Pull the index pin outward, then rotate it slightly to ensure a secure fit, the index pin will get stuck and the folding handle will work.
- Pull the folding handle, folding plunger will come out of the upper socket and slip to the lower socket. When the folding plunger gets stuck in the lower socket and the folding handle resets in the stem headset, please remember to insert the index pin back to fix the folding system.
SCANNER
Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions.
Pictures for reference only, subject to our existing products.
FAQ
- Q: How do I charge the scooter?
- A: Connect the charger to the charging port on the scooter and plug it into a power source within the specified input voltage range. Refer to the manual for detailed charging instructions.
- Q: What should I do if there is a problem with the scooter?
- A: If you encounter any issues or malfunctions with the scooter, refer to the troubleshooting section in the manual for guidance. If problems persist, contact customer support for assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>