MARTEC Lighting MLXB3451M Single and Double Head Tricolour LED Security Light Instruction Manual

MARTEC Lighting MLXB3451M Single and Double Head Tricolour LED Security

Light

Specifications

• Item No.: MLXB3451M (Single Head) / MLXB3452M (Double Head)
• Product Name : BANDIT Tricolour LED Spotlight
• Wattage: 12W (Single Head) / 24W (Double Head)
• Input Voltage: 220-240VAC
• Lumen: 1050lm / 1100lm / 1100lm (Single Head) / 2100lm / 2200lm / 2200lm (Double Head)
• CCT: 3000K-4000K-5000K
• IP Rating: IP54
• Beam Angle: Not specified
• CRI: Not specified
• LED Material: Not specified

Product Usage Instructions

Installation:
NOTE: This product must be installed by a licensed electrician.
For best performance, install at a height between 1.8 and 2.5 meters.

1. Ensure the mains supply is switched OFF.
2. Unscrew the front screw to access the mounting hole.
3. Mark fixing hole positions and locate wall plugs into drilled holes.
4. Remove the mounting base from the light body. Connect Live (L) and Neutral (N) according to markings on the terminal block.
5. Put silicone plugs into mounting holes and select desired CCT (WW-NW-CW).
6. Refit the light body to the mounting base and tighten firmly to maintain IP rating.
7. Adjust lamp head direction by loosening the screw in the knuckle, positioning the light head, and then re-tighten the screw.
8. Reconnect the mains supply and turn on the light.

FAQ

• What should I do if the light doesn’t turn on automatically?
  Check the detection field and ensure there are no obstructions. Also, verify the power supply and sensor settings.

• Can I adjust the brightness of the spotlight?
  The spotlight allows you to select between Warm White (WW), Natural White (NW), and Cool White (CW) color temperatures, but does not have adjustable brightness levels.

NOTE : This product must be installed by a licensed electrician .
NOTE : For best performance install at a height between 1.8 and 2.5 metres .

Installation

1. Ensure the Mains Supply is switched OFF.

2. Unscrewing the front screw.

3. Remove the moun?ng base “B ” from the light body “A” .

4. Mark fixing hole posi?ons. Locate wall plugs into drilled holes.
   Fasten the backing

5. Put the silicone plug into the moun?ng holes

6. Connect the Live (L),Neutral (N) , according to the marking on the terminal block .

7. Select desired CCT (WW-NW-CW)

8. Refit the light body “A” to the mounting base “B”. securing it in place. Tighten them firmly to maintain IP rating

9. Loose the screw in knuckle and angle the light head into desired direction, then re-tighten the screw firmly .
   Reconnect the mains supply,
   Turn on the light .

Rotation of lamp head

• The lamp head can be rotated up.anddown 120°
• The lamp head can be rotated left and right 340°

Part list

Single Head

Double Head

Back View

Accessories

Specification

Product Name

Wattage

| BANDIT Tricolour Single Head
LED Spotlight12W| BANDIT Tricolour Double Head
LED Spotlight24W
---|---|---
Input Voltage| 220-240VAC| 220-240VAC
Lumen| 1050lm / 1100lm / 1100lm| 2100lm / 2200lm / 2200lm
CCT| 3000K-4000K-5000K| 3000K-4000K-5000K
IP Rating| IP54| IP54
Beam angle| 90°| 90°
CRI| >80| >80
LED| COB LED| COB LED
Material| Plastic（ABS & PC）| Plastic（ABS & PC）

Product Disposal

Please dispose of this product thoughtfully once it has passed its useful life. At the end of their working life, do no throw the appliance out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling. Contact your local authorities for advise on recycling facilities in your area.

• Martec Australia Pty Ltd
• Email: sales@martecltd.com.au
• Contact Phone: 02 8778 7500
• Contact Fax: 02 8778 7555
• Company Address: 6 Austool Place lngleburn NSW 1890
• Opening Hours: Monday to Friday Warehouse hours: 7.30am – 3.30pm
• Office hours: 8.00am – 5.00pm EST
• WWW.MARTECAUSTRALIA.COM.AU
  ( For Warranty Conditions please refer to the Martec Warranty Terms and Conditions )

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>