MARTEC Lighting Ashton LED Wall Light Installation Guide
- June 9, 2024
- MARTEC Lighting
Table of Contents
MARTEC Lighting Ashton LED Wall Light
Instruction
We strongly recommend that you read this manual carefully before installation.
Installation MUST be carried out by a qualified and licensed electrician.
Models Parameters
- MLXA34510W 10W LED Wall Light IP54 Tricolour
- MLXA34510M White 10W LED Wall Light IP54 Tricolour Matt Black
Installation Instructions
-
Switch off the mains.
-
Unscrew and remove the mounting bracket using the allen key supplied.
-
Choose colour temperature by flicking the switch.
-
Mount the bracket on the desired surface using the two screws supplied.
-
Wire to main as illustrated above.
-
Attach fitting back onto the bracket using the allen key supplied.
-
Switch on the mains.
Accessories Included
- 1x allen key
- 2x washers
- 2x wall plugs
- 2x screws
Data Table
Models| Power (W)| PF| CCT (K)| Weight
(KG)| Operation Temperature (Degree)| IP
---|---|---|---|---|---|---
MLXA34510W| 10| ≧0.5| 3000
4000
5000
| 0.75| +40° -20°| 54
MLXA34510M| 10| ≧0.5| 3000
4000
5000
| 0.75| +40° -20°| 54
WARNING
- Installation of product MUST follow SAA standards and meet local authority regulations.
- Installation MUST be carried out by a qualified and licensed electrician.
- Light MUST be earthed.
- Light MUST be firmly installed to a flat solid surface, wall or ceiling.
- DO NOT immerse any part of the light fitting into water or any form of liquid.
- DO NOT look directly into the LED light.
- The warranty is VOID if product is not installed according to this installation guide.
2 Year Replacement Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty-
statement/
E: [email protected] | P: 02 8778 7500 www.martecaustralia.com.au